Adaptive investigation of the optical properties of polymer fibers from mixing noisy phase shifting microinterferograms using deep learning algorithms

In this article, an adaptive denoising method is suggested to accurate investigate the optical and structural features of polymeric fibers from noisy phase shifting microinterferograms. The mixed class of noise that may produce in the phase-shifting interferometric techniques is established. To our knowledge, this is an early study considered the mixing noises that may occur in microinterferograms. The suggested method utilized the convolution neural networks to detect the noise class and then denoising, it according to its class. Four convolution neural networks (Googlenet, VGG-19, Alexnet, and Alexnet–SVM) are refined to perform the automatic classification process for the noise class in the established data set. The network with the highest validation and testing accuracy of these networks is considered to apply the suggested method on realistic noisy microinterferograms for polymeric fibers, polypropylene and antimicrobial polyethylene terephthalate)/titanium dioxide, recoded using interference microscope. Also, the suggested method is applied on noisy microinterferograms include crazing and nanocomposite material. The demodulated phase maps and the three-dimensional birefringence profiles are calculated for tested fibers according to the suggested method. The obtained results are compared with the published data for these fibers and found to be in good agreements.     

基于LP与小波包的复杂机电系统监测序列混沌降噪方法

针对流程工业生产系统监测数据存在强噪声和混沌性的特点,提出了一种局部投影方法(Local Projection Method)与小波包方法相结合的信号降噪方法。该方法先利用局部投影方法从动力学系统嵌入流形的角度进行多次迭代降噪,并根据关联维数来判定迭代终止;再利用小波包方法从频率的角度进行降噪,抑制高频噪声的干扰,取得了较好的降噪效果。用Lorenz时间序列进行仿真验证,对仿真时间序列加入不同程度的噪声,对比分析小波包、局部投影与该方法降噪后的相空间、SNR值和最大Lyapunov指数,证明了该方法对于中高强度噪声具有更好的降噪效果。并将该方法用于某压缩机组的实际监测数据降噪,评估三种方法的降噪效果,进一步验证了该方法的优越性。     

一种基于全变分技术和Lp伪范数的椒盐噪声去除方法

针对传统各向同性全变分（Isotropy total variation，ITV）去噪算法容易导致图像边缘模糊、不易保持图像细节信息等问题，提出一种基于L _p 伪范数和各向同性全变分的图像去噪方法。该方法将L _p 伪范数代替ITV模型中的L ₁范数，利用交替方向乘子算法（Alternating direction method of multipliers, ADMM）将能量泛函拆解成若干个子问题，并将差分算子视为卷积算子；然后引入卷积定理和快速傅里叶变换(Fast Fourier transform, FFT)提高算法运算效率；最后通过Matlab进行仿真实验，运用图像质量的客观和主观评价方法进行评价分析。结果表明，本文方法能够较好地保留图像的边缘特性，有效提升去噪效果。     

Q值正演模拟约束下的零偏移距VSP资料Q值估算

随着油气勘探目的层逐步走向深部,球面扩散、透射损失、环境噪声等使得VSP资料的初至子波发生改变,导致常规的Q值估算方法质量难以得到保证。为此,利用塔里木盆地托甫台地区TP327井零偏移距VSP资料,综合考虑透射损失和球面扩散的影响,提出一种Q值正演模拟约束下的零偏移距VSP资料Q值估算方法。该方法通过研究区的纵波速度、横波速度和密度建立层状地质模型,利用射线追踪的方法,用大地吸收介质模型的Q值正演模拟结果,对频谱比法和经验公式估算的初始Q值进行修正,使得Q值正演模拟结果与实际地震波的衰减记录在频谱特征上吻合,从而得到更为精确的Q模型。TP327井Q值估算结果表明,该方法与李庆忠经验公式得到的结果在浅层比较接近,但在中层和深层,两者差异较大;Q值正演模拟结果约束的子波与实际VSP资料子波的频谱比较吻合,证实用Q值正演模拟约束得到的层间Q值更为可靠。利用Q值正演模拟约束方法得到的Q模型对研究区地震资料进行反Q滤波能显著提高地震资料分辨率,有助于提高碳酸盐岩地层中缝洞的识别精度。     

地面微地震有源噪声自动识别与匹配压制方法

微地震监测技术通过对非常规储层压裂改造引发的震源点进行成像，实时提供压裂施工过程中产生的裂隙高度、长度、宽度和方位角等信息，为致密储层压裂提供指导，以提高油气采收率。在地面布设站点进行监测时，因微地震信号传播距离较远、近地表吸收衰减严重、地面有源噪声较多，微地震数据具有信号能量弱、噪声干扰强和信噪比低等特点，严重制约微地震事件的定位精度。噪声源多分布于地表，根据有源噪声与由储层向上传播的微地震事件在能量、频率、传播速度和源位置等方面的差异，本文提出微地震有源噪声自动识别与匹配方法。综合长短时窗能量比与微地震量板方法，自动识别有源噪声干扰，并进行噪声源位置和传播速度的三维最优并行搜索；利用同时确定的最优噪声源位置和传播速度对微地震数据进行动校正处理，得到噪声标准道，通过能量自适应匹配处理压制有源噪声。正演模拟数据和实际微地震数据去噪效果证明，本文方法能有效压制有源噪声，显著提高微地震数据品质，为后续微地震事件精确定位奠定了基础。     

数据驱动的机床等待过程节能方法研究

为了降低机床等待过程中的能耗，提出了一种实时数据驱动的机床等待时间预测与节能控制方法。首先，建立了射频识别驱动的生产进度评估方法，并以生产进度数据作为输入，构建了基于堆栈降噪自编码的机床等待时间预测模型；其次，依据预测的机床等待时间，提出了机床状态切换方法，以降低机床能耗；最后，通过一个电梯零部件制造车间的案例分析，表明该方法的预测误差仅为4.1%，同时将机床等待过程能耗降低了57%，实现了制造车间的节能减排。     

砂砾岩体沉积期次划分及其与物性的关系——以东营凹陷北部陡坡带Y920区块沙四上亚段为例

砂砾岩体储层岩性复杂、非均质性强，且扇体多期叠置，沉积期次划分困难。以东营凹陷北部陡坡带Y920区块沙四上亚段砂砾岩体为研究对象，建立以岩心、FMI图像为基础，以测井信息小波变换技术为核心，以三维地震为约束的砂砾岩扇体沉积期次划分方法。基于岩心、FMI图像可直观识别沉积期次界面，进而标定常规测井资料；经测井信息小波变换后表现出周期性振荡特征的小波系数曲线可反映沉积界面响应特征，结合功率谱筛选尺度因子，可定量对单井沉积期次进行划分；通过井-震结合，实现全区域期次界面的等时对比，将Y920区块砂砾岩体划分为8个沉积期次。沉积期次的发育控制着沉积相及岩性的分布，与物性展布也密切相关。研究结果表明，研究区块地层自下而上（8至1沉积期次）表现出退积沉积初始阶段（扇根—扇中）沉积期次中上部物性较好，沉积中间阶段（扇中）整个沉积期次物性均较好，而沉积末期阶段（扇中—扇端）沉积期次中下部物性较好，进而统计单井各期次有效储层的厚度，分期次刻画有效储层平面展布特征，发现3，4，5沉积期次的西北部为Y920区块有利储层展布范围。研究结果为东营凹陷北部陡坡带砂砾岩体油藏的精细勘探开发提供了依据。     

基于自适应NLM算法的地震勘探随机噪声压制研究

针对地震信号中有效信号数据存在重复性与冗余信息较多等特点，对比分析了传统的NLM算法与改进后的自适应NLM算法对地震勘探随机噪声压制，研究了不同SNR下的模拟地震信号以及两种方法去噪后的MSE和SNR对比，研究得出:当采用传统的NLM算法时，由于整个地震数据信号只利用一个滤波参数，忽略了信号区域内的不同噪声强度与结构特性，效果不佳；而采用自适应的NLM算法的滤波方法，能够较好的实现滤波的效果，模拟仿真信号与真实地震信号的滤波效果，有效验证了改进算法的自适应NLM算法对地震勘探随机噪声具有较好的压制去噪作用。     

Location Related Signals with Satellite Image Fusion Method Using Visual Image Integration Method

Investigations were performed on a group utilizing (General Purpose Unit) GPU and executions were evaluated for the utilization of the created parallel usages to process satellite pictures from satellite Landsat7.The usage on a realistic group gives execution change from 2 to 18 times. The nature of the considered techniques was assessed by relative dimensionless global error in synthesis (ERGAS) and Quality Without Reference (QNR) measurements. The outcomes demonstrate execution picks ups and holding of value with the bunch of GPU contrasted with the outcomes and different analysts for a CPU and single GPU. The errand of upgrading the view of a scene by combining data caught from various picture sensors is usually known as multisensor picture combination. This paper displays a territory based picture combination calculation to consolidate SAR (Synthetic Aperture Radar) and optical pictures. The co-enlistment of the two images is first led utilizing the proposed enrollment method prior to picture combination. The paper displays a parallel execution of existing picture combination techniques on a graphical group. Parallel executions of techniques in view of discrete wavelet changes are created. Division into dynamic and motionless regions is then executed on the SAR surface picture for particular injection of the SAR picture into panchromatic (PAN) picture. An integrated image in view of these two pictures is produced by the novel region based combination plot, which forces diverse combination rules for each fragmented region. At long last, this picture is melded into a multispectral(MS) picture through the half breed skillet honing technique proposed in past research. Exploratory outcomes exhibit that the proposed strategy demonstrates preferred execution over different fusion algorithms and can possibly be connected to the multisensory combination of SAR and optical pictures.     

基于S变换的高速列车小幅蛇行识别方法

针对现有的高速列车监测方法没有考虑高速列车振动信号的非平稳特性,从而使得列车出现蛇形失稳现象的问题，提出一种采用S变换的方法对高速列车转向架信号进行处理，进而提取高速列车运行特征。采用最小二乘支持向量机（LS-SVM）对特征进行训练和识别，结果证明，基于S变换的特征提取方法的识别准确率达到了100%，优于基于小波变换的特征提取方法，从而可以及时预测高速列车的运行状态，保障列车的运行安全。