我国水-能源-粮食耦合关系及影响因素

为缓解我国水、能源和粮食资源紧张问题，促进资源可持续利用，构建水-能源-粮食系统，利用耦合协调度模型对我国的30个省（自治区、直辖市）进行测算,并利用空间杜宾模型分析主要影响因素。结果表明：2003—2017年，我国能源、粮食评价[JP]指数高于水资源评价指数，系统综合评价指数逐年递增；大部分省份耦合协调度处于初级协调水平且呈现逐年上升的态势，个别省份耦合协调度濒临失调；耦合协调度空间自相关性较强，虽有明显波动，但是呈现逐年加强的态势；影响耦合协调度的主要因素有从业人口数、固定资产投资额、人均生产总值、人口总数、[JP]文盲人口占比、工业污染排放、城镇化。     

空间曲线的特征识别与高质量非均匀采样

为避免传统均匀采样方法因忽视曲线重要特征而生成不理想的采样结果,获得给定数量且由特征点和辅助点组成的采样点序列,提出基于特征识别的高质量空间曲线非均匀采样方法.首先使用抛物线插值法得到曲线上所有曲率极大值点和挠率极大值点的近似位置,经筛选后产生特征点,以更好地抓住空间曲线的轮廓特征.然后定义基于弧长、曲率和挠率加权组合的特征函数,并以此自适应地选取曲线上的辅助点.与3种主流采样方法比较的实验结果表明,该方法能够获得更高质量的采样结果且具有更好的实用性,从而进一步改善空间曲线的B样条拟合效果.     

A Lane-Level Road Marking Map Using a Monocular Camera

The essential requirement for precise localization of a self-driving car is a lane-level map which includes road markings (RMs). Obviously, we can build the lane-level map by running a mobile mapping system (MMS) which is equipped with a high-end 3D LiDAR and a number of high-cost sensors. This approach, however, is highly expensive and ineffective since a single high-end MMS must visit every place for mapping. In this paper, a lane-level RM mapping system using a monocular camera is developed. The developed system can be considered as an alternative to expensive high-end MMS. The developed RM map includes the information of road lanes (RLs) and symbolic road markings (SRMs). First, to build a lane-level RM map, the RMs are segmented at pixel level through the deep learning network. The network is named RMNet. The segmented RMs are then gathered to build a lane-level RM map. Second, the lane-level map is improved through loop-closure detection and graph optimization. To train the RMNet and build a lane-level RM map, a new dataset named SeRM set is developed. The set is a large dataset for lane-level RM mapping and it includes a total of 25157 pixel-wise annotated images and 21000 position labeled images. Finally, the proposed lane-level map building method is applied to SeRM set and its validity is demonstrated through experimentation.      

西藏燕麦主要种植区灌溉定额空间分布及影响因素

燕麦为西藏自治区典型牧草之一,由于种植区地域辽阔,灌溉试验结果受限,西藏燕麦主要种植区的灌溉定额尚不明确。本文在西藏燕麦主要种植区内选取28个典型站点进行资料收集,遵循农业气候相似原则进行区域划分,基于水量平衡法揭示了西藏燕麦主要种植区灌溉定额的空间分布特征,并根据统计学原理分析了其影响因素。研究表明:燕麦主要种植区的灌溉定额呈由西藏中部至东部呈现先递增后递减的趋势,50%水文年下的燕麦灌溉定额在56~265 mm之间变化。降雨量是影响研究区内燕麦灌溉定额的主要因素(R²为0.515),ET₀次之(R²为0.152);其它气象因素中,日照时数对研究区燕麦灌溉定额影响较大(R²为0.462),且呈正相关关系;相对湿度对燕麦灌溉定额影响较小。西藏燕麦主要种植区的灌溉定额及其空间分布可为西藏自治区灌溉用水管理提供支撑。     

Techno-economic analysis of hydrogen energy for renewable energy power smoothing

With the increasing proportion of renewable energy (mainly wind power and photovoltaic) connected to the grid, the fluctuation of renewable energy power brings great challenges to the safe and reliable operation of power grid. As a clean, low-carbon secondary energy, hydrogen energy is applied in renewable energy (mainly wind power and photovoltaic) grid-connected power smoothing, which opens up a new way of coupling hydrogen storage energy with renewable energy. This paper focuses on the optimization of capacity of electrolyzers and fuel cells and the analysis of system economy in the process of power output smoothing of wind/photovoltaic coupled hydrogen energy grid-connected system. Based on the complementary characteristics of particle swarm optimization (PSO) and chemical reaction optimization algorithm (CROA), a particle swarm optimization-chemical reaction optimization algorithm (PSO-CROA) are proposed. Aiming at maximizing system profit, the capacity of electrolyzers and fuel cells are constrained by wind power fluctuation, and considering environmental benefits, government subsidies and time value of funds, the objective function and its constraints are established. According to the simulation analysis, by comparing the calculated results with PSO and CROA, it shows that PSO-CROA effectively evaluates the economy of the system, and optimizes the optimal capacity of the electrolyzers and fuel cells. The conclusion of this paper is of great significance for the application of hydrogen energy storage in the evaluation of power smoothness and economy of renewable energy grid connection and the calculation of economic allocation of hydrogen energy storage capacity.     

基于改进LFM算法的主动解列断面搜索方法

针对传统解列断面算法复杂度高的问题,提出一种基于改进LFM算法的解列断面搜索方式。首先,基于节点间电气联系和能量转移分布熵完成电网加权复杂网络建模;其次,基于主动解列断面约束条件,对LFM算法做适应性改良;最后,通过改进LFM算法得到解列断面,并在IEEE39节点系统中验证了算法有效性。仿真结果表明,改进LFM算法可充分考虑传统解列断面的约束条件,在算法具有较低复杂度的同时对系统运行状态更强的适应性。     

Electrical and optical characteristics of atmospheric helium jet array plasma

In this paper, a honeycomb structure jet array with seven jet units was adopted to generate plasmas. Both the average discharge power and the emission intensity of the main excited species increase with increasing applied voltage. There are three stages of discharge evolution at different applied voltages: initial discharge, uniform discharge and strong coupling discharge.The spatial distribution of the emission intensity of the excited species can be divided into three categories: growth class, weakening class and variation class. The gas temperature along the whole plasma plume at different applied voltages is maintained at around 320K and can be widely used in heat-labile applications.     

Elliptical distribution-based weight-determining method for ordered weighted averaging operators

The ordered weighted averaging (OWA) operators play a crucial role in aggregating multiple criteria evaluations into an overall assessment supporting the decision makers’ choice. One key point steps is to determine the associated weights. In this paper, we first briefly review some main methods for determining the weights by using distribution functions. Then we propose a new approach for determining OWA weights by using the regular increasing monotone quantifier. Motivated by the idea of normal distribution-based method to determine the OWA weights, we develop a method based on elliptical distributions for determining the OWA weights, and some of its desirable properties have been investigated.     

A cell-based smoothed radial point interpolation method with virtual nodes for three-dimensional mid-frequency acoustic problems

It is well known that the finite element method (FEM) encounters dispersion errors in coping with mid-frequency acoustic problems due to its “overly stiff” nature. By introducing the generalized gradient smoothing technique and the idea of condensed shape functions with virtual nodes, a cell-based smoothed radial point interpolation method is proposed to solve the Helmholtz equation for the purpose of reducing dispersion errors. With the properly selected virtual nodes, the proposed method can provide a close-to-exact stiffness of continuum, leading to a conspicuous decrease in dispersion errors and a significant improvement in accuracy. Numerical examples are examined using the present method by comparing with both the traditional FEM using four-node tetrahedral elements (FEM-T4) and the FEM model using eight-node hexahedral elements with modified integration rules (MIR-H8). The present cell-based smoothed radial point interpolation method has been demonstrated to possess a number of superiorities, including the automatically generated tetrahedral background mesh, high computational efficiency, and insensitivity to mesh distortion, which make the method a good potential for practical analysis of acoustic problems.     

Multicriteria decision-making using Archimedean aggregation operators in Pythagorean hesitant fuzzy environment

In multicriteria decision-making (MCDM), the existing aggregation operators are mostly based on algebraic t-conorm and t-norm. But, Archimedean t-conorms and t-norms are the generalized forms of t-conorms and t-norms which include algebraic, Einstein, Hamacher, Frank, and other types of t-conorms and t-norms. From that view point, in this paper the concepts of Archimedean t-conorm and t-norm are introduced to aggregate Pythagorean hesitant fuzzy information. Some new operational laws for Pythagorean hesitant fuzzy numbers based on Archimedean t-conorm and t-norm have been proposed. Using those operational laws, Archimedean t-conorm and t-norm-based Pythagorean hesitant fuzzy weighted averaging operator and weighted geometric operator are developed. Some of their desirable properties have also been investigated. Afterwards, these operators are applied to solve MCDM problems in Pythagorean hesitant fuzzy environment. The developed Archimedean aggregation operators are also applicable in Pythagorean fuzzy contexts also. To demonstrate the validity, practicality, and effectiveness of the proposed method, a practical problem is considered, solved, and compared with other existing method.