常减压减一线生产柴油组分的探讨

从理论上分析了降低减一线馏程干点的可能性 ,并通过操作调整 ,降低了减一线馏程干点 ,使之符合作柴油调合组分。不仅对原直馏柴油的质量不产生影响 ,且经济效益可观。     

Air flow through a non-airconditioned bus with open windows

Open window buses without air-conditioning are a major mode of urban and inter-city transport in most countries. High occupancy combined with hot and humid conditions makes travel in these buses quite uncomfortable. In this study air flow through a bus has been studied that could be the basis for low cost and eco-friendly methods of increasing passenger comfort and possibly reduce drag. The aerodynamics of such a road vehicle has not been studied as previous investigations have been confined to vehicles with closed windows that present a smooth exterior to air flow. Using a 1:25 scaled Perspex model of an urban bus in Delhi, flow visualization was performed in a water channel. The Reynolds numbers were one-tenth of a real bus moving at 10 m/s. Smoke and tuft visualizations were also performed on an urban bus at 40 km/h. Numerical simulations were performed at the actual Reynolds number. Even though there were Reynolds number differences, the broad features were similar. Air enters the bus from the rear windows, moves to the front (relative to the bus) and exits from the front windows. Inside air velocity relative to the bus is about one-tenth of the free-stream velocity. The flow is highly three-dimensional and unsteady.     

A new family of ionic liquids based on the 1-alkyl-2-methyl pyrrolinium cation

Five new salts based on 1-alkyl-2-methyl pyrrolinium ion are reported, two involving the iodide ion and three involving the bis(trifluoromethanesulfonyl) amide ion. The iodide salts have melting points around 100 °C, while the amide salts have melting points around room temperature. Two of the amide salts can be easily quenched into the glassy state and exhibit glass transition temperatures around −70 °C. The 2-methyl pyrrolinium cation bears structural similarities to the aromatic imidazolium cations on one hand and the cyclic ammonium cation family based on the pyrrolidinium cation on the other. The properties of the salts reported here are compared within these two related families of salts.     

The traditional Yemeni window and natural lighting

The traditional Yemeni window is considered to be one of the most important elements that characterize the yemeni architecture. The beauty of the traditional Yemeni window comes from its four main components which combined the functions of view, lighting, ventilation, protection, and privacy. These functions can be controlled by the occupants according to their social and environmental needs. The four main components are the lower part (Taqah), the fanlight (Qamariyah), the wooden external overhang (Konnah), and the small vent (Shaquos). Since fanlights provide natural lighting during day-time, the area of the lower part can be reduced and its exterior shutters can be closed without the need for artificial lighting. The internal natural lighting that is provided by the upper and lower parts of the window was investigated to see its quality. In this investigation, there were two main goals. The first is the contribution and quality of the internal light provided by the Qamariyah when shutters are closed. The second is the effect of the internal simple white cloth curtains, in the lower part, in the internal light quality. Visual measurements were taken in a typical room of a traditional house of the Old City of Sana'a, Yemen. From the findings, it was found that the fanlights (Qamariyat) provide low and soft homogeneous internal lighting which was as low as 22 lux average. However, the occupants have the ability to increase level of lighting to as high as 600 or 700 lux. This can be done simply by deciding which shutter to open and how many of them to be opened. In this paper, the methodology and findings will be presented and discussed.     

套管开窗侧钻技术在吐哈老井改造中的应用

从侧钻井层、开窗工艺、井身剖面的优选和井眼轨迹控制、固井措施优化等方面，详细总结了套管开窗定向侧钻技术在吐哈油田老井改造中应用的经验，系统地描述了该技术应用的地质条件和工程要素，提出了吐哈侧钻井层优选的量化指标和固井质量的优化措施。近两年，该技术在老井治理、开采难动用储量、提高采收率、降低开发钻井成本等方面展现出广阔的前景。     

Performance of in-call buffer/window allocation schemes for short intermittent file transfers over broadband packet networks

While static open loop rate controls may be adequate for handling continuous bit rate (CBR) traffic, relatively smooth data traffic, and relatively low speed bursty data traffic over broadband integrated networks, high speed bursty data sources need more dynamic controls. Burst level resource allocation is one such dynamic control. Potential benefits and other issues for burst level resource parameter negotiations for bursty data traffic over high speed wide area packet networks have been discussed earlier.^1–6 A detailed analysis of an adaptive buffer/window negotiation scheme for long file transfers using these concepts is presented in Reference 1. In this paper we discuss two burst level buffer/window negotiation schemes for short intermittent file transfers, focusing on the specific needs of such traffic streams. We develop closed network of queues models to reflect the behaviour of the proposed schemes. These models, while being simple, capture essential details of the control schemes. Under fairly general assumptions, the resulting network of queues is of product form and can be analysed using the mean value analysis. We use such an analysis to compare the proposed schemes and to determine appropriate sizes of trunk buffers to achieve the desired balance between bandwidth utilization and file transfer delay. The effects of other parameters on the performance of these schemes as well as on the buffer sizing rules are also discussed. Burst level (in-call) parameter negotiation may be carried out by the end system with the network elements or by an interface system (access controller) with the broadband network elements. We discuss implications of this location as well as the needed protocol features. Finally, the service discrimination capabilities desired at the trunk controllers in switching nodes are briefly discussed.     

Experience with Applying Formal Methods to Protocol Specification and System Architecture

In the last three years or so we at Enterprise Platforms Group at Intel Corporation have been applying formal methods to various problems that arose during the process of defining platform architectures for Intel's processor families. In this paper we give an overview of some of the problems we have worked on, the results we have obtained, and the lessons we have learned. The last topic is addressed mainly from the perspective of platform architects.     

水库发电运行的计算机仿真

介绍了用VB语言编写的一个简便、实用的适合洞坪水库发电运行的计算机仿真程序.     

自动替代虚假点数据的数据处理方法

本文给出自动剔除虚假点并使用合理值加以替代的方法。     

Jitter in ATM networks and its impact on peak rate enforcement

Cells arriving to an ATM network experience random delays due to queueing in upstream multiplexing stages, notably in customer premises. This is the phenomenon of jitter and the aim of the present paper is to study its influence on peak rate enforcement. We first introduce some general characterizations of jitter and then, describe two models of jittered flows based on simple queueing systems. We discuss the objectives of peak rate enforcement and study the impact of jitter on the dimensioning of jumping window and leaky bucket mechanisms. A useful synthetic characterization of jitter appears to be a remote quantile of the cell delay distribution expressed in units of the initial inter-cell interval.