Toward High-Performance Dihydrophenazine-Based Conjugated Microporous Polymer Cathodes for Dual-Ion Batteries through Donor–Acceptor Structural Design

Recent studies have demonstrated that dihydrophenazine (Pz) with high redox-reversibility and high theoretical capacity is an attractive building block to construct p-type polymer cathodes for dual-ion batteries. However, most reported Pz-based polymer cathodes to date still suffer from low redox activity, slow kinetics, and short cycling life. Herein, a donor–acceptor (D–A) Pz-based conjugated microporous polymer (TzPz) cathode is constructed by integrating the electron-donating Pz unit and the electron-withdrawing 2,4,6-triphenyl-1,3,5-triazine (Tz) unit into a polymer chain. The D–A type structure enhances the polymer conjugation degree and decreases the band gap of TzPz, facilitating electron transportation along the polymer skeletons. Therefore the TzPz cathode for dual-ion battery shows a high reversible capacity of 192 mAh g⁻¹ at 0.2 A g⁻¹ with excellent rate performance (108 mAh g⁻¹ at 30 A g⁻¹), which is much higher than that of its counterpart polymer BzPz produced from 1,3,5-triphenylbenzene (Bz) and Pz (148 and 44 mAh g⁻¹ at 0.2 and 10 A g⁻¹, respectively). More importantly, the TzPz cathode also shows a long and stable cyclability of more than 10 000 cycles. These results demonstrate that the D–A structural design is an efficient strategy for developing high-performance polymer cathodes for dual-ion batteries.     

Adenine-functionalized conjugated polymer as an efficient photocatalyst for hydrogen evolution from water

Conjugated polymers have emerged as a promising class of organic photocatalysts for photocatalytic hydrogen evolution from water splitting due to their adjustable chemical structures and electronic properties. However, developing highly efficient organic polymer photocatalysts with high photocatalytic activity for hydrogen evolution remains a significant challenge. Herein, we present an efficient approach to enhance the photocatalytic performance of linear conjugated polymers by modifying the surface chemistry via introducing a hydrophilic adenine group into the side chain. The adenine unit with five nitrogen atoms could enhance the interaction between the surface of polymer photocatalyst and water molecules through the formation of hydrogen bonding, which improves the hydrophilicity and dispersity of the resulting polymer photocatalyst in the photocatalytic reaction solution. In addition, the strong electron-donating ability of adenine group with plentiful nitrogen atoms could promote the separation of light-induced electrons and holes. As a result, the adenine-functionalized conjugated polymer PF6A-DBTO2 shows a high photocatalytic activity with a hydrogen evolution rate (HER) of 25.21 mmol g^?1 h^?1 under UV-Vis light irradiation, which is much higher than that of its counterpart polymer PF6-DBTO2 without the adenine group (6.53 mmol g^?1 h^?1). More importantly, PF6A-DBTO2 without addition of a Pt co-catalyst also exhibits an impressive HER of 21.93 mmol g^?1 h^?1 under visible light (λ > 420 nm). This work highlights that it is an efficient strategy to improve the photocatalytic activity of conjugated polymer photocatalysts by the modification of surface chemistry.     

Insights from proteome to phosphorylated proteome: deciphering different regulatory mechanisms in goat muscles with high- and low-meat quality

To investigate the inner mechanisms of meat quality differences between high-quality (HQ) and low-quality (LQ), a comparative quantitative study between longissimus thoracis and external intercostals of goat muscle was performed from proteome to phosphorylated proteome using RP-HPLC in combination with the ‘isobaric tag’ for relative and absolute quantitation (iTRAQ) labelling strategy. Altogether, 1441 proteins were identified in our study, of which 673 were phosphoproteins, and a total of twenty were common differentially expressed proteins. Myosin, carbonic anhydrase, and phosphoglucomutase could be used as proteins marker for HQ and LQ meat. Bioinformatics analysis showed that these proteins exhibited different rates for glycolysis and oxidative phosphorylation reaction, thus causing the different pH and NADH change rates, and resulting in better colour, tenderness, and water retention in HQ meat. The release of Ca²⁺ and adenosine triphosphate changed the meat quality through calcium signalling. Our finding provides a comprehensive view of proteome changes and their phosphorylation levels in goat muscle, involved in producing meats of different muscle parts. It also gives a better understanding of the regulation of protein on various biological processes that determine the final meat quality attributes.     

Screening of frozen-thawed conditions for keeping nutritive compositions and physicochemical characteristics of goat milk

Frozen milk can help producers overcome the seasonality of goat milk production, low goat production and short lactation periods, and avoid discarding milk during some special periods. We investigated effects of combination between freezing (cryogenic refrigerator of ?16 to ?20°C or ultra-cryogenic refrigerator of ?76 to ?80°C) and thawing (homeothermy of 20 to 25°C or refrigeration of 2 to 4°C) on nutritive compositions and physicochemical characteristics of raw goat milk during storage period (80 d). Compared with fresh goat milk, the frozen-thawed milk decreased contents of fat, protein, and lactose, as well as surface tension and stability coefficient, whereas increased effective diameter and polydispersity index. The average values of color values (L*, a*, and b*) in 4 group samples changed from 83.01 to 82.25, ?1.40 to ?1.54, 3.51 to 3.81, respectively, and the ΔE of most samples did not exceed 2. In contrast to the other 3 frozen-thawed treatments, goat milk treated with ultra-cryogenic freezing-homeothermic thawing (UFHT) possessed higher fat (5.20 g/100 g), smaller effective particle diameter (0.32 µm), and the lowest polydispersity index value (0.26). The color and confocal laser scanning microscopy images of UFHT were similar to those of fresh goat milk, illustrating UFHT was the optimal approach to maintain the natural quality of goat milk. Our finding provides a theoretical basis for producers to freeze surplus milk.     

Structure,dielectric properties of novel Ba(Zr,Ti)O3 based ceramics for energy storage application

(1-x) Ba(Zr_0.2Ti_0.8)O₃-x Na_0.5Bi_0.5TiO₃ (x = 0, 10, 20 30, 40, 50 mol%) (BZTN) ceramics are prepared by the traditional solid phase method. All BZTN ceramics exhibit a pseudo-cubic BZT based perovskite structure. Both the average grain size and the relaxor ferroelectricity of BZTN ceramics gradually increase with increasing NBT content. The W_rec of 3.22 J/cm³ and η of 91.2% is obtained for the BZTN40 ceramic at 241 kV/cm. BZTN40 ceramic also exhibits good temperature stability from room temperature to 150 °C and frequency stability from 1 Hz to 100 Hz. A P_D of 0.621 J/cm³ and a t_0.9 of 82 ns is obtained for the BZTN40 ceramic at 120 kV/cm. BZTN ceramics show application potential in energy storage and pulse power capacitors.     

Effect of ionic radius on colossal permittivity properties of (A,Ta) co-doped TiO2 (A= alkaline-earth ions) ceramics

(A, B) co-doped TiO₂ ceramics attract great interests due to the excellent dielectric properties. In this work, the (A, Ta) co-doped TiO₂ ceramics were prepared by a solid state reaction process. The effect of the acceptors ionic radius on the structure and properties of TiO₂ ceramics was investigated. According to XRD analysis, the main phase is rutile TiO₂ for all samples. Due to the larger ionic radius, it is hard to replace Ti site in TiO₆ octahedron. As a result, the content of the secondary phase increased with increasing ionic radius. The dielectric properties were significantly enhanced by co-doping of alkaline-earth ions and tantalum ions, and the best dielectric constant obtained at 3% (Sr, Ta) co-doped compositions, where ε’ = 2.1 × 10⁵, tanδ = 0.21. Meanwhile, the XPS analysis suggested that the concentration of the defect dipoles exhibit a maximum in Sr-doped TiO₂ ceramics. The larger ionic radius of the acceptors leads to the more stability of the defect structure. However, for Ba ions, the replacement concentration decreased due to the excessive ionic radius, which in turn reduces the defect concentration. This work is meaningful for the further investigations on TiO₂-based colossal permittivity materials.     

Enhanced dielectric performance of (Ag1/4Nb3/4)0.01Ti0.99O2 ceramic prepared by a wet-chemistry method

The (Ag_1/4Nb_3/4)_0.01Ti_0.99O₂ ceramic, with ultra-high permittivity and relatively low dielectric loss, was synthetized by a sol-seed method. Significant influences of Ti concentration on the phase structure, microstructure, and dielectric performances were observed. By optimizing the Ti concentration, high active powders and effectively controlled grain uniformity were obtained, which is great benefit for depressing the calcining temperature. The sample shows an ultra-high permittivity (ε_r ~43271 at 1 kHz) and relatively low dielectric loss (tanδ ~ 0.048 at 1 kHz) at room temperature, meanwhile, the temperature coefficient of ε_r keeps in ±15% within the temperature range from −78 to 130°C, fortunately for X7R capacitor. Based on the XPS results, the defect cluster structure was revealed and giant permittivity is closely associated with the electron pinned defect dipole.     

A fluorescence chemosensor for benzonitrile derived from in-situ synthesis of azolate–carboxylic acid and zinc(II) ions

A new zinc(II) homometallic coordination polymer (CP), {[Zn(TAA-OH)₂] · 1.5H₂O}_n (1) (HTAA-OH = 2-(5-hydroxy-1H-1,2,4-triazole-1-yl) acetic acid) has been synthesized via an in-situ synthetic approach and structurally characterized in detail. In 1, the HTAA-OH ligand is generated in-situ by the nucleophilic addition of 2-(1H-1,2,4-triazole-1-yl) acetic acid. CP 1 features a 2D structure with sql topology, where the neighboring Zn(II) ions are bridged through two oxygen atoms of carboxyl group and two nitrogen atoms of triazole from the HTAA-OH ligands. Luminescence study shows that 1 dispersed in acetonitrile performs a distinct luminescence enhancing effect upon addition of benzonitrile, indicating that 1 is a promising fluorescence chemosensor for benzonitrile.     

Preparation of on chip,flexible supercapacitor with high performance based on electrophoretic deposition of reduced graphene oxide/polypyrrole composites

A new concept is introduced to fabricate flexible, on-chip supercapacitors by electrophoretically depositing highly dispersed reduced graphene oxide/polypyrrole on interdigital-like electrodes. By the unique method, the deposited films could construct on the substrate facilely and uniformly. The prepared all-solid-state device demonstrates high volumetric capacitance (about 147.9 F cm⁻³), high energy density (13.15 mWh cm⁻³ at a power density of 1300 mW cm⁻³) and excellent cycling stability (approximately 71.7% of the initial capacitance retained after 5000 cycles). Compared with other supercapacitor, the device demonstrated here is lightweight, flexible and inexpensive.