羟丙基甲基纤维素增韧水泥胶浆的配合比试验研究

羟丙基甲基纤维素溶液作为一种改性剂,掺入水泥胶浆中用于改善其韧性。采用正交试验研究了水胶比、纤维素溶液浓度和掺量对水泥胶浆的抗折强度、抗压强度及折压比的影响,并获得了最佳配合比。用单因素分析研究了减水剂和纤维素对强度和折压比的影响,以及纤维素对凝结时间的影响。最终结果表明羟丙基甲基纤维素可以改善水泥胶浆的韧性并对凝结时间的影响有限。     

The influence of HPMC concentration on release of theophylline or hydrocortisone from extended release mini-tablets

Context: Mini-tablets are compact dosage forms, typically 2–3 mm in diameter, which have potential advantages for paediatric drug delivery. Extended release (ER) oral dosage forms are intended to release drugs continuously at rates that are sufficiently controlled to provide periods of prolonged therapeutic action following each administration, and polymers such as hypromelllose (HPMC) are commonly used to produce ER hydrophilic matrices.

Objective: To develop ER mini-tablets of different sizes for paediatric delivery and to study the effects of HPMC concentration, tablet diameter and drug solubility on release rate.

Methods: The solubility of Hydrocortisone and theophylline was determined. Mini-tablets (2 and 3 mm) and tablets (4 and 7 mm) comprising theophylline or hydrocortisone and HPMC (METHOCEL? K15M) at different concentrations (30, 40, 50 and 60%w/w) were formulated. The effect of tablet size, HPMC concentration and drug solubility on release rate and tensile strength was studied.

Results and Discussion: Increasing the HPMC content and tablet diameter resulted in a significant decrease in drug release rate from ER mini-tablets. In addition, tablets and mini-tablets containing theophylline produced faster drug dissolution than those containing hydrocortisone, illustrating the influence of drug solubility on release from ER matrices. The results indicate that different drug release profiles and doses can be obtained by varying the polymer content and mini-tablet diameter, thus allowing dose flexibility to suit paediatric requirements.

Conclusion: This work has demonstrated the feasibility of producing ER mini-tablets to sustain drug release rate, thus allowing dose flexibility for paediatric patients. Drug release rate may be tailored by altering the mini-tablet size or the level of HPMC, without compromising tablet strength.     

HPMC-based granules for prolonged release of phytostrengtheners in agriculture

One of the main aims in agriculture is to guarantee soil wellness, which is a fundamental requirement to produce high-quality crops with high yields. Focused on this aim, periodical administrations of nutrients or phytostrengtheners are often necessary. The most relevant disadvantages of these administrations are the high dosage number required and the low availability of the substance within the soil. For these reasons, a crucial goal to increase the economic and environmental sustainability of the cultivation process is to reduce the dosage number, which can be obtained increasing the active substance availability in the soil. A granular hydroxypropyl methylcellulose (HPMC) matrix, produced using the wet granulation process, was used to encapsulate a phytostrengthener and to guarantee its controlled release. The granular product was characterized in terms of granules properties and phytostrengtheners leaching within the soil. The results showed good flowability and mechanical properties of the granules as well as the possibility to reduce the product leaching with the phytostrengtheners encapsulation in the HPMC matrices.     

抗泛碱装饰砂浆的研究

为了解决装饰砂浆普遍存在的泛碱难题,以可再分散乳胶粉(SWF-08)、羟丙基甲基纤维素醚(HPMC)、阻碱剂和憎水剂(SWR-100)为影响因素,以14 d拉伸强度和泛碱性为考核指标,采用单因素分析法优选出制备装饰砂浆的最佳配方.结果表明:各种物料对装饰砂浆抑制泛碱作用的大小依次为阻碱剂>HPMC>胶粉>憎水剂;当w(...     

Preparation and characterization and release properties of Eudragit RS based ibuprofen pellets prepared by extrusion spheronization: effect of binder type and concentration

Objective: The effects of type and concentration of binding agent on properties of Eudragit RS based pellets were studied.

Materials and methods: Pellets containing ibuprofen (60%), Eudragit RS (30%), Avicel (10%) were prepared by extrusion spheronization. PVP K30, PVP K90, HPMC 6cp, HPMC K100LV or HPMC K4M were used as binders in concentrations of 2, 4 or 6% based on the total weight of formulation. The process efficiency, pellet shape, size distribution, crushing strength, elastic modulus and drug release were examined. The effect of curing on pellet properties was also investigated.

Results: The process of extrusion spheronization became difficult with increase in binder viscosity and/or concentration. An increase in binder viscosity and/or concentration resulted in reduction in the yield of pellets, wider particle size distribution and departure from spherical shape especially in the case of HPMC binder. The crushing strength and elastic modulus of pellets decreased with increase in PVPs concentration. However this was not the case for pellets containing HPMCs. Drug release rate increased as the concentration of binder increased. Pellets containing 2%w/w of PVP K30 showed the slowest release rate. For those pellets with brittle nature, curing changed the behavior of pellet under mechanical test to plastic deformation. Yield point and elastic modulus of all formulations decreased after curing. Curing decreased the drug release rate.

Conclusion: Binder type and concentration significantly affected the properties of pellets. For production of sustained release ibuprofen Eudragit RS based pellets lower viscosity binders (PVP K30) with concentrations less than 4%w/w was optimum.     

添加HPMC对无麸质大米面包品质的影响

水稻是全球主导的粮食作物之一,作为无麸质食品的主要原料倍受青睐。但水稻中缺乏面筋蛋白,在发酵过程中难以形成持气性较好的网孔结构,所以很难获得理想的面包类发酵产品。本论文探讨了采用HPMC为面筋替代物制作无麸质大米面包的可行性,并研究了HPMC对大米面包品质的影响,从而为无麸质大米面包的制作奠定基础,为大米资源的广泛应用开辟新的途径。结果表明,当添水量提高到100%110%时,4%的HPMC可以作为面筋替代物,用以改善大米面团的品质,烘焙出优质、理想的无麸质大米面包,但其淀粉体外消化率和整体感官评价却受到影响。最后认为,应该把无麸质大米面包看作为一类新型的焙烤食品,不一定要完全适用小麦面包的评价体系。     

Evaluation of hydrophilic,hydrophobic and waxy matrix excipients for sustained release tablets of Venlafaxine hydrochloride

Objective: Venlafaxine is freely soluble In water and administered orally as hydrochloride salt In two to three divided doses. In the present investigation different release retarding matrices have been evaluated for sustained release of venlafaxine hydrochloride (VH) from the formulated tablets.

Materials and methods: Sustained release matrix tablets were formulated using different hydrophilic, hydrophobic and waxy materials as matrix formers. Tableting was done by pre-compression, direct compression and hot melt granulation depending on the type of matrix material used and evaluated for different tests. The formulated tablets were compared with commercial venlafaxine products. In vitro drug dissolution profiles were fitted In different mathematical models to elucidate the release mechanism.

Results: Dissolution data showed that commercial formulations Venlor XR^® and Venfax PR^® released the entire drug withIn 8?h where as the formulated tablets with hydroxypropylmethylcellulose (HPMC) and cetyl alcohol as matrix formers provided sustained release of drug for 14–15?h. The release was found to follow Hixson Crowel and Higuchi kinetics for HPMC and cetyl alcohol tablets, respectively.

Conclusion: The developed matrix tablet formulations with HPMC and cetyl alcohol provided sustained release profiles for prolonged periods than commercial formulations.     

A Comparison of the Puncturing Properties of Gelatin and Hypromellose Capsules for Use in Dry Powder Inhalers

This study investigates capsule puncture in dry powder inhalers. Gelatin and hydroxypropylmethyl cellulose (HPMC) capsules (stored at 11 and 33% relative humidities) were punctured using a pin from a Foradil® inhaler, with insertion force measurement via an Instron tester. In HPMC capsules, the force after capsule puncture reduced by half and then increased to a second maximum as the pin shaft entered the hole. In gelatin capsules, the postpuncture force reduced to zero, indicating shell flaps losing contact with the pin. At lower moisture contents, both capsules were less flexible. This provides a tool to measure the shell properties of inhalation capsules.     

Microwave-assisted synthesis of anisotropic gold nanocrystals in polymer matrix and their catalytic activities

We report a facile and fast one-pot microwave (MW) synthesis of gold nanotriangle, nanobranches and nanorod. Gold salt is reduced to gold nanoparticles by ethylene glycol/polyethylene glycol in the presence of hydroxypropyl methyl cellulose. Morphology of the nanocrystals can be tailored by varying the amount of capping agents, reducing agent and the MW irradiation time. Synthesised nanoparticles are characterised by ultraviolet–visible (UV–Vis), transmission electron microscopic and X-ray diffraction spectroscopy study. The key requirement for producing the gold triangle and gold nanorod of higher aspect ratio is the adequate MW heating time. The photocatalytic activity of gold nanocrystals is investigated by monitoring the photochemical reduction of 2,4,6-trinitrophenol (TNP) in the presence of excess NaBH₄. The reaction is first order with respect to the concentration of TNP. It has been observed that the catalytic efficiency of rod-like gold nanocrystals is higher than the other gold nanocrystals.     

Effect of solid content and composition of hydroxypropyl methylcellulose-lipid edible coatings on physico-chemical and nutritional quality of 'Oronules' mandarins

BACKGROUND: Citrus fruit represent an important source of vitamin C, as well as other bioactive compounds. Edible coatings have the potential to extend shelf life of citrus by providing a semi‐permeable barrier to water and gases, which depends on coating composition, solid content (SC), and cultivar. However, little is known about the effect of coatings on citrus nutritional quality. This work studies the effect of coating composition and SC of hydroxypropyl methylcellulose (HPMC)–beeswax (BW)–shellac coatings on the physico‐chemical, sensory and nutritional quality of ‘Oronules’ mandarins. Coatings prepared at the same lipid content differed in the BW:shellac ratio (1:3 and 3:1) and SC of the formulations (40 and 80 g kg^?1). RESULTS: The coating with 1:3 BW:shellac ratio and 80 g kg^?1 SC was the most effective controlling weight loss, although it was less effective than the commercial wax tested. Increasing SC had a greater effect than the BW:shellac ratio in fruit internal atmosphere and sensory quality, with the presence of off‐flavour when coatings were applied at 80 g kg^?1 SC. Nutritional quality was not affected by the application of the different treatments. CONCLUSION: HPMC–lipid coatings have the potential to extend shelf life of ‘Oronules’ mandarins. However, care should be taken controlling formulation SC to avoid the build‐up of off‐flavour. Copyright © 2011 Society of Chemical Industry