A new method for extrapolating the load-displacement response of drilled shaft foundations for interpretation of side capacity

In this study, the side capacity of drilled shaft foundations is estimated from partially-mobilized load–displacement field data using a new method in the extrapolation of load–displacement response. A dataset of 138 bi-directional load tests is used to evaluate the degree of mobilization of unit side resistance. A total of 612 unit side-resistance curves obtained from measured strain gauge recordings are utilized in this study. The proposed extrapolation approach is based on a new technique, the Double Tangent method, characterizing the extent of mobilization for each unit side-resistance curve. Roughly, 12% of the dataset exhibits a fully-mobilized load–displacement response, with the remainder exhibiting varying degrees of a partially-mobilized response. Fully-mobilized records are further characterized using the Double Tangent method over different ranges of mobilization, resulting in four regression models based on predominant soil types. Each model is assessed statistically, and a global regression model is found suitable to predict maximum unit side resistance. The global model is further validated using two independent load test datasets, comparing measured values of unit side resistance against predicted values. The model is then used to predict maximum unit side resistance for all partially-mobilized data within the dataset, and the results are compared to two extrapolation techniques currently used in practice. The corresponding resistance-displacement response is extrapolated using a proposed asymptotic curve-fitting function for side resistance, and an example extrapolation is illustrated to showcase how the proposed method can be used in engineering practice.     

Notwendigkeit und Vermarktung von Flexibilitätsoptionen im Energiesystem der Zukunft

Demands on production, distribution and consumption of electrical energy change fundamentally with the energy revolution. Energy purchasing costs for inflexible consumers are rising and proceeds of inflexible producers are sinking. Companies are able to reduce costs by marketing operational flexibility options. This article sets out the need of flexibility in the energy system and the new marketing options. Flexibility potentials within infrastructure plants of a chemical park are analyzed, evaluated regarding marketing and activated in the presented research project FlexChemistry.     

Sizing of multi-stage Op Amps by combining design equations with the gm/ID method

Analog integrated circuit design has as integral parts both analytical reasoning and numerical validation in the process from topology construction to sizing. Given a circuit topology, different circuit sizing results can be obtained from different processes of sizing inference. Sizing methods by simulation-based numerical searching have been a continuously studied subject. However, almost all approaches in this category require an overwhelming number of circuit simulations to arrive at an optimized sizing result. On the other hand, many published manual sizing methods by using the conventional device equations also require repeated SPICE simulations to correct the equation-based sizing results. This paper proposes a systematic gm/ID-based initial sizing method specifically customized for designing multiple-stage operational amplifiers (Op Amps). A main feature of the proposal is to use circuit-level design equations as constraints on the gm/ID table lookup method to substantially reduce the uncertainty in the sizing calculations. As a result, a significant amount of SPICE based correction work can be reduced to complete an initial sizing. The proposed sizing procedure includes a few regular sizing rules customized to the configuration of multi-stage Op Amps. We validate the proposed sizing method by application to several multi-stage Op Amp examples with a capacitive load or Miller compensation. Simulations have justified that the produced initial sizing results can achieve most of the prespecified design targets.     

Orthorhombic to tetragonal polymorphic transformation of YTa3O9 and its inhibition through the design of high-entropy (Y0.2La0.2Ce0.2Nd0.2Gd0.2)Ta3O9

To explore the mechanism of phase transformation, YTa₃O₉ was prepared by an integrated one-step synthesis and sintering method at 1500 °C using Y₂O₃ and Ta₂O₅ powders as starting materials. High-temperature XRD patterns and Raman spectra showed that a phase transformation from orthorhombic to tetragonal took place in YTa₃O₉ through the bond length and angle changes at 300–400 °C, which caused a thermal conductivity rise. To inhibit the phase transformation, a high-entropy (Y_0.2La_0.2Ce_0.2Nd_0.2Gd_0.2)Ta₃O₉ (HE RETa₃O₉) was designed and synthesized at 1550 °C using the integrated solid-state synthesis and sintering method. In tetragonal structured HE RETa₃O₉, phase transformation was inhibited by the high-entropy effect. Furthermore, HE RETa₃O₉ exhibited low thermal conductivity, and its tendency to increase with temperature was alleviated (1.69 W/m·K, 1073 K). Good phase stability, low thermal conductivity and comparable fracture toughness to YSZ make HE RETa₃O₉ promising as a new thermal barrier coating material.     

Bearing capacity of horizontally layered geosynthetic reinforced stone columns

In very soft soils, the bearing capacity of stone columns may not improve significantly due to very low confinement of the surrounding soil. Therefore, they may be reinforced with geosynthetics by using vertical encasement or horizontal layers. Very limited studies exist on horizontally reinforced stone columns (HRSCs). In this research, some large body laboratory tests have been performed on horizontally reinforced stone columns with diameters of 60, 80, and 100?mm and groups of stone columns with 60?mm diameter. Results show that the bearing capacity of stone columns increases by using horizontally reinforcing layers. Also, they reduce lateral bulging of stone columns by their frictional and interlocking effects with stone column aggregates. Finally, numerical analyses were carried out to study main affecting parameters on the bearing capacity of HRSCs. Numerical analysis results show that the bearing capacity increases considerably with increasing the number of horizontal layers and decreasing space between layers.     

Value stream mapping approach and analytical network process to identify and prioritize production system’s Mudas (case study: natural fibre clothing manufacturing company)

The current research has been done to identify and prioritize the Mudas of the production line of a natural fibre clothing manufacturing company; in this way, value stream mapping has been used to identify the Mudas, then analytical hierarchy method has been used to screen the Mudas. In the first step, necessary information to design value stream of production process has been obtained by observation, measurement and interview; afterward, according to the obtained information and by forming a focus group, Mudas in the production line have been identified and prioritized according to seven categories of Mudas. In order to prioritizing the Mudas by the usage of analytical hierarchy method, the Super Decision software has been applied. Then, according to the obtained priorities, suggested map of the future value system has been drawn and some suggestions have been presented to eliminate Mudas and move towards the lean manufacturing.     

百万千瓦级核电站轴封型主泵整机集成试验验证优化方案研究

为确保主泵的安全性和可靠性，主泵整机在完成集成设计后需通过试验进行验证。文中介绍了主泵设计与验证的总体思路，提出了主泵工程样机需开展的整机试验项目。基于已有的试验条件，进行了主泵整机集成试验验证方案的优化和可行性分析。分析结果表明，在充分开展主泵各模块、子模块、部件和材料的试验与分析的基础上，可采用小流量试验方案进行主泵整机集成试验验证。      

International Trade

Values of net oil imports(-)/exports for Austria, Belgium, Denmark, Finland, France, Germany, Italy, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, the United Kingdom, Japan, Canada, the United States and Australia. Updated on a monthly basis. Number of imports for Belgium, France, Germany, Greece, Republic of Ireland, Italy, Netherlands, Portugal, Spain, Sweden, the United Kingdom, and Other EU-15 (EU-15), Norway, Poland, Switzerland, Turkey, and Other Europe (OECD Europe), Canada, Chile, Mexico, and the United States (OECD Western Hemisphere), and Australia, Japan, Republic of Korea, New Zealand, (OECD Asia-Pacific), and Total OECED. Current data for Austria, Belgium, Finland, France, Germany, Greece, Italy, Netherlands, Portugal, Spain, Sweden, the United Kingdom, Other EU-15 (EU-15), Czech Republic, Hungary, Poland, Slovakia, Turkey, and Other Europe (OECD Europe), Canada, Mexico, and the United States (OECD Western Hemisphere), Australia, Japan, Republic of Korea, and New Zealand (OECD Asia-Pacific). Updated on a monthly basis. Current data for principal importers of natural gas and the amount in which they import from United States, Republic of Korea, United Kingdom, France, Japan, Italy, Germany and Spain (Table 19.1). Current data for principal exporters of natural gas and the amount they export to Canada, Trinidad and Tobago, the United States, Netherlands, Norway, Russia, Turkmenistan, Qatar, Algeria, Nigeria, Indonesia, Malaysia and Australia (Table 19.2). Updated on a monthly basis.     

International Trade

Values of net oil imports(-)/exports for Austria, Belgium, Denmark, Finland, France, Germany, Italy, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, the United Kingdom, Japan, Canada, the United States and Australia. Updated on a monthly basis. Number of imports for Belgium, France, Germany, Greece, Republic of Ireland, Italy, Netherlands, Portugal, Spain, Sweden, the United Kingdom, and Other EU-15 (EU-15), Norway, Poland, Switzerland, Turkey, and Other Europe (OECD Europe), Canada, Chile, Mexico, and the United States (OECD Western Hemisphere), and Australia, Japan, Republic of Korea, New Zealand, (OECD Asia-Pacific), and Total OECED. Current data for Austria, Belgium, Finland, France, Germany, Greece, Italy, Netherlands, Portugal, Spain, Sweden, the United Kingdom, Other EU-15 (EU-15), Czech Republic, Hungary, Poland, Slovakia, Turkey, and Other Europe (OECD Europe), Canada, Mexico, and the United States (OECD Western Hemisphere), Australia, Japan, Republic of Korea, and New Zealand (OECD Asia-Pacific). Updated on a monthly basis. Current data for principal importers of natural gas and the amount in which they import from United States, Republic of Korea, United Kingdom, France, Japan, Italy, Germany and Spain (Table 19.1). Current data for principal exporters of natural gas and the amount they export to Canada, Trinidad and Tobago, the United States, Netherlands, Norway, Russia, Turkmenistan, Qatar, Algeria, Nigeria, Indonesia, Malaysia and Australia (Table 19.2). Updated on a monthly basis.