Electrical conductivity in iodine-doped ethyl cellulose

The electrical conductivity of solution-grown ethyl cellulose (EC) films, 5–30 μm thick, has been studied in the sandwich configuration (metal–EC–metal) as a function of iodine concentration from 0.5 to 5.0 wt% ratio. The studies were conducted in the temperature range 333–383 K, while the field was varied over the range (3.0–5.5) × 10⁴V/cm. Aluminium was used as the lower electrode, while the upper electrode was of Al, Ag, Cu, Au or Sn. Certain transient effects such as a large burst of current immediately after the application of field were observed. An attempt was made to identify the nature of the current by comparing the observed dependence on electric field, electrode material and temperature with the respective characteristic features of the existing theories of electrical conduction. The results show that the electrical conduction follows Ohm's law at lower fields, while at higher fields, space-charge limited current (SCLC) was observed. It was also found that Richardson–Schottky emission was responsible, to some extent, for the transport of charge carriers in the polymer. The conductivity of the films increased on doping with iodine. The dopant molecules are considered to act as additional trapping centes and provide links between the polymer molecules in the amorphous region, thus resulting in the formation of charge transfer complexes.     

Influence of Zn ion implantation on structures and field emission properties of multi-walled carbon nanotube arrays

The structures and field emission properties of multi-walled carbon nanotube arrays implanted with Zn+ by MEVVA ion implanter have been investigated.The results revealed that Zn+implantation induced structural damage and that the top of carbon nanotubes with multi-layered graphite structure were transformed into carbon nanowires with amorphous structure.Meanwhile,C:Zn solid solution was synthesized after Zn+ implantation.The turn-on field and threshold field were 0.80 and 1.31 V/μm,respectively for original...     

GSM手机音频设计和测试

详细叙述了终端的音频指标要求和测试调试方法，之后基于Infineon平台的一个实际项目中，论述了如何测试和配置控制数据全过程，使读者能够全面了解GSM手机音频方面的技术标准和电路调试过程．     

美国火电厂烟气排放限值及控制技术

美国火电厂烟气排放限值及控制技术在过去的37年内不断发展进步.受限制的排放物越来越多,而且对每种污染物的限值日益严格.总结了当今美国使用的排放限值及控制技术,并展望了未来的排放限值及潜在的排放控制技术.     

从第十届国际真空展看真空行业发展

根据多次真空展的统计数据,总结出第10届国际真空展的四大亮点:参展厂商数及参展外商数、展位数均创历史新高;干泵成展会主角;流通、服务业方兴未艾,国内参展厂商高端产品比重增加.通过参展,作者认为:应从新能源开发,在新一轮产业革命中寻求真空行业发展的新机遇.     

Attraction and Repulsion of Nucleons: Sources of Stellar Energy

The potential energy of a nuclide is enhanced by about 10 MeV per nucleon from the repulsion between like nucleons, and diminished by about 20 MeV per nucleon from the attraction between unlike nucleons. Nuclear stability results mostly from the interplay of these opposing forces, plus Coulomb repulsion of positive charges. Whereas fusion may be the primary mechanism by which first generation stars produce energy, repulsion between like nucleons may cause neutron emission from the collapsed core (neutron star) produced in a terminal supernova explosion and initiate luminosity in second generation stars that accrete on such objects. As noted earlier [1], the scarcity of solar neutrinos, the enrichment of light isotopes in the solar wind, and the presence of abundant short-lived nuclides and interlinked chemical and isotopic heterogeneities in the early solar system might also be explained if the Sun formed in this manner.     

注碳外延硅的荧光特性研究

研究了注碳外延硅经氢气退火及电化学腐蚀处理后的荧光特性。经能量为50keV,剂量为2×1016cm-2的碳离子注入后的外延单晶硅片,在氢气氛下高温退火及电化学腐蚀处理。荧光谱仪分析表明电化学腐蚀是蓝光发射的前提,并且不同的电化学腐蚀条件对发光强度和峰位影响极大。不同的激发光波长亦可影响发光谱的峰位。     

合成射流激励影响扩散燃烧NOx生成的实验研究

对合成射流激励助燃风影响NOx生成进行了实验研究,主要考察了合成射流频率、幅值对燃烧器内掺混区时均速度、NOx含量、温度等参数分布的影响。实验结果表明,加入适当频率的合成射流激励助燃风,能够增强径向、周向速度幅值,改善天然气与助燃风的掺混,降低“热点”温度和NOx生成量（较无激励时最多降低约14％）,这有益于降低天然气燃烧造成的大气污染。     

节能减排与清洁发展机制

中国的能源利用效率不高,万元GDP能耗水平是发达国家的3到11倍.同时中国是发展中国家,完成"十一五"的节能减排目标面临巨大的资金和技术压力.清洁发展机制(CDM)是《京都议定书》规定的发达国家和发展中国家的一种国际合作方式,充分利用清洁发展机制,有助于节能减排目标的实现.     

Characterisation of rare earth minerals with field emission scanning electron microscopy

Abstract

Rare earth elements are becoming increasingly in demand, due to their prevalence in both renewable energy devices and high end electronics. The characterisation of the composition and morphology of the various phases that have valuable rare earth elements in the ores are needed in conjunction with the study of their physicochemical properties to optimise industrial process to extract the minerals containing the rare earth elements. Rare earth bearing minerals contain many elements with overlapping X-ray peaks (L- and M-lines) with an energy dispersive spectrometry detector, requiring a high degree of X-ray energy resolution. A program was developed to obtain the intensity of each peak by deconvolution of the X-ray spectrum. Low accelerating voltage of less than 5 kV and small beam diameter of less than 10 nm of a cold field emission scanning electron microscope allow x-ray microanalysis on the nanometre scale. A 100 nm wide phase was observed at 4 kV on a backscattered electron micrograph. Furthermore, a small beam diameter of less than 10 nm was used for identification of small phases of a few micrometres.

Les éléments de terre rare sont de plus en plus en demande, grâce à leur prévalence tant dans les dispositifs d’énergie renouvelable que dans l’électronique de haute gamme. On a besoin de caractériser la composition et la morphologie des différentes phases qui contiennent des terres rares de valeur dans les minerais, en combinaison avec l’étude de leurs propriétés physico-chimiques, afin d’optimiser le procédé industriel d’extraction des minéraux contenant les terres rares. Les minéraux porteurs de terre rare contiennent plusieurs éléments ayant des pics de rayons x qui se chevauchent (lignes L et M) avec un détecteur de spectroscopie à dispersion d’énergie, nécessitant une haute résolution énergétique. On a développé un programme visant à obtenir l’intensité de chaque pic par déconvolution du spectre de rayons x. Un faible voltage d’accélération de moins que 5 kV et un faisceau à faible diamètre de moins que 10 nm d’un microscope électronique à balayage par cathode froide permettent la microanalyse des rayons x à l’échelle du nanomètre. On a observé une phase de 100 nm de largeur à 4 kV sur une micrographe d’électrons rétrodiffusés. De plus, on a utilisé un faisceau de faible diamètre de moins que 10 nm pour l’identification de petites phases de quelques μm.