一种相位测试用曲口面天线的设计与应用

相位测试技术可满足不同外形天线罩的在线测试需求。通过数值仿真,设计最佳变换曲线完成矩形 传输波导与圆形辐射天线的拟合连接,能够有效降低天线驻波比,实现测试探头的高增益收发,提升测试有效性。 在维持驻波比参数前提下,对天线口面弧线给予二次曲率调整,可以适应不同外形天线罩的测试稳定性要求。根据 仿真结果加工的低驻波比反射相位测试天线,已应用于多个型号天线罩成型中的相位在线测试,提高了监控的有效 性,验证了设计仿真结果的正确性。     

融合环境因素的有限空间毒气扩散危害程度分析

为探究环境因素对毒气扩散危害程度的影响,通过对比有限空间内外环境差异,了解气体在有限空间内受力情况,并以传统高斯烟羽模型为基础,考虑扩散气体与有限空间边界碰撞产生的反射作用,建立了适用于有限空间气体扩散的改进高斯烟羽模型。深度剖析有限空间气体扩散环境,挖掘气体扩散主要关联因子,构建风速、地表粗糙度对有限空间气体扩散的影响函数;参照有限空间环境特征,分别设置3种不同风速与2种不同地表粗糙度,推求6种不同环境条件下气体扩散面积,阐明风速与地表粗糙度对有限空间气体扩散的影响程度。结果表明:在单一风速条件下,风速越高,地表粗糙度越低,洞室内H2S气体滞留时间越短,洞室内气体的扩散面积越小;风速越低,地表粗糙度越高,洞室内气体的扩散面积越大。     

Hydrothermally grown uniform TiO2 coatings on ZrO2 fibers and their infrared reflective and thermal conductive properties

Improving the infrared reflectivity of ZrO₂ polycrystalline fibers is of great benefit to its thermal applications. In the present research, we cast a highly uniform TiO₂ coating with a thickness ranging from dozens to hundreds of nanometers on ZrO₂ fibers by utilizing hydrothermal growth. The coating bonds tightly to the ZrO₂ fibers via Zr–O–Ti chemical linkages, and the thickness of the coating can be tailored by varying the hydrothermal growth time. The TiO₂ coating, acting as a sheath towards electromagnetic radiation, not only reflected light with wavelengths ranging from the visible region to the infrared region and up to 8 μm but also shielded the Raman signals of the ZrO₂ fibers. The present research provides an efficient way to cast controllable and uniform coatings on flexible fiber materials. The obtained ZrO₂ fibers coated with TiO₂ may have applications such as reinforcement for bulk ceramics, thermal barrier coatings, aerogels, etc., thus performing the dual functions of mechanical strengthening and thermal insulation.     

藕节多酚超声波辅助提取工艺优化及其抗油脂氧化能力研究

以藕节多酚得率为评价指标,超声时间、超声温度、料液比和乙醇体积分数为影响因素,通过单因素试验和Box-Behnken(BBD)试验设计优化藕节多酚的提取工艺条件,同时采用恒温箱热贮藏试验法研究藕节多酚的抗油脂氧化能力。结果表明:藕节多酚的最佳提取条件为超声时间34 min、超声温度50℃、料液比1∶20、乙醇体积分数70%,在此条件下藕节多酚得率为(7. 11±0. 14)%;藕节多酚能够明显减缓油脂过氧化值的升高趋势,对动植物油脂的自氧化均有明显的抑制作用,且具有一定的浓度依赖性。     

Combined constant speed control method for a wind generator equipped with hydraulic energy storage

A wind generator equipped with hydraulic energy storage (WG‐HES) uses hydraulic transmission systems instead of gearbox transmissions, thus eliminating high‐power converters and reducing the tower‐top cabin weight. When there is no wind or the wind speed is extremely low, the pressured oil released by accumulators is used to drive a motor to operate at a constant speed, thereby generating constant‐frequency power. However, few studies have examined the constant speed control characteristics for generating electricity using only an accumulator group. In this study, a combined constant speed (CCS) proportional–integral–derivative (PID) control method based on “variable displacement and throttling” is proposed, which includes two closed loops and one regulating loop. First, a simulation model of the CCS PID control method for a variable motor was established in the Simcenter Amesim program. The influence of different PID parameters on the anti‐interference ability of the constant speed control of the motor was analyzed under a given load step. Then, we obtained the range of control parameter values and a set of optimal values. Second, the effectiveness of the CCS control method and the accuracy of the simulation results were verified on a 600‐kW WG‐HES system prototype. The results verified that the CCS control method has good anti‐interference ability and can meet the requirements of constant speed control for a variable motor under the best PID parameters. These results can provide a basis for developing control strategies for WG‐HESs when there is no wind or at low wind speeds.     

Wave scattering through an orthotropic thermoelastic slab sandwiched between two isotropic elastic half-spaces

Abstract

Present study deals with the scattering of a plane wave through an orthotropic thermoelastic slab sandwiched between two elastic half-spaces. Unlike the classical theory of thermoelasticity, we have employed non-classical thermoelastic theories (LS-theory and GL-theory) to analyze the scattering of plane waves. The amplitude ratios for different waves have been computed numerically for the considered generalized theories of thermoelasticity. The effect of the slab thickness on the amplitude ratios has been shown graphically. Moreover, the amplitude ratios of different waves (i.e., reflected, transmitted, forward and backward waves) are compared for different values of slab thickness under both the LS-theory and GL-theory.     

海面油膜的偏振反射特性仿真实验

为了给海面溢油污染识别检测提供理论基础,根据菲涅尔反射公式的偏振反射系数,结合偏振双向反射率因子和粗糙海面的概率密度分布函数,建立了完善的pBRDF模型,仿真在不同太阳入射角度、不同探测器观测角度以及不同海面风速风向等条件下海水和油膜的偏振反射分布函数。结果表明:海水和油膜太阳天顶角为53°和56°时P偏振反射率分别为1.0×10^-5和2.5×10^-5,S偏振反射率随着太阳天顶角的增加而增加;海面风速越大偏振反射率峰值越小;海面风向只改变pBRDF的空间位置;海水和油膜线偏振度空间分布有明显差异。搭建实验平台相机以40°拍摄时,得出海水和油膜的线偏振度分别在0.2~0.4, 0.5~0.7之间,同时表明利用偏振探测获取目标场景的偏振度和偏振角图可提高图像质量。     

Microwave dielectric ceramics in (Mg1/3Sb2/3)O2-ZrO2-TiO2 system with near zero τf and low loss in a very wide range

A series of (ZrTi)_1-x(Mg_1/3Sb_2/3)_2xO₄ (0.04?≤?x?≤?0.36) ceramics were successfully synthesized through the conventional solid-state processing. Appropriate content of CuO was added as sintering aids to promote the density of ceramics. The XRD analysis revealed that the main crystalline phase of ceramics sintered at optimal temperature belonged to α-PbO₂-type structure. Raman spectroscopy and far infrared reflectivity (FIR) spectra were employed to study the phonon modes of ceramics, which explained the relationship between microwave dielectric properties and structure. It is interesting that the τ_f are near-zero (+6.6 ~ ?4.6?ppm/°C) and meanwhile the Q×f are relatively high (29,000–41,800?GHz) for samples with x in a very wide range of 0.10–0.36. In this range, their dielectric constants (ε_r) can be adjustable from 35.4 to 24.4. The results demonstrated this ceramic system is a potential candidate for microwave dielectric applications requiring an adjustable dielectric constants and near zero τ_f.     

对称消声器传递损失测量及误差修正

为了提高对称消声器传递损失的测量效率，基于声学理论分析，提出了一种单负载法传递损失计算模型。针对反射系数较大的吸声末端，导致该方法在实际测量中存在较大误差的问题，推导出了一种能够消除测试管道末端反射声波在上、下游形成多次反射的修正公式。通过自制阻抗管进行试验测试，结果表明：在末端声学负载吸声性能良好的情况下，单负载法传递损失计算模型能够精确计算出对称消声器的传递损失；修正公式能够有效地消除末端负载所引起的反射波对传递损失计算的影响，降低对末端声学负载吸声性能的要求，保证单负载传递损失计算模型的适用性。     

Collective reflection strategy for moderating conformity tendency and promoting reflective judgment performance

Reflective judgement is crucial for medical-related practitioners in dealing with controversial issues. However, the conformity phenomenon is likely to occur and interfere with reflective judgement learning during interactive activities. Effective strategies are required to moderate the conformity behaviour tendency (CBT) and improve reflective judgement performance (RJP). This study demonstrates two significant results: (a) Compared with the guided self-reflection learning strategy, the online collective reflection (OCR) learning strategy effectively weakened the learners' general CBT while dealing with professional controversial issues; and (b) a significantly negative correlation between the RJP achieved and the change of CBT in online environment was detected in the OCR group. The implications and potential applications in higher education were discussed. Further studies are needed to confirm the long-term effects and the extending application to other professional studies.