单光纤传输光推动便携式压力测量仪的研究

介绍了用单根光纤传输测量信号和功率信号的光功率推动液体压力测量仪及其工作原理。该仪器以电容式压力传感器的δ元件作为压力检测元件，采用低功耗前置器电路和简单直杆结构，实现了便携式测量。测量范围为O～100kPa，精度为O．01kPa。     

联产供冷与电力供冷能耗比较分析

文中将两种供冷能耗比较分解成用电煤耗差、用热煤耗量、增加产汽用电煤耗量三部分进行分析，按照热量法得出在目前一般情况下联产供冷比电力供冷通常费能和定性定量结论，为全面研究比较热电冷联产与分产的能耗奠定一个基础。     

The influence of raw material characteristics on the industrial pelletizing process and pellet quality

Industrial pelletizing of sawdust was carried out as a designed experiment in the factors: sawdust moisture content, fractions of fresh pine, stored pine and spruce. The process parameters and response variables were energy consumption, pellet flow rate, pellet bulk density, durability and moisture content. The final data consisted of twelve industrial scale runs. Because of the many response variables, data evaluation was by principal component analysis of a 12 × 9 data matrix. The two principal component model showed a clustering of samples, with a good reproducibility of the center points. It also showed a positive correlation of energy consumption, bulk density and durability all negatively correlated to flow rate and moisture content. The stored pine was more related to high durability and bulk density. The role of the spruce fraction was unclear. The design matrix, augmented with the process parameters was a 12 × 6 matrix. Partial least squares regression showed excellent results for pellet moisture content and bulk density. The model for durability was promising. A 12 × 21 data matrix of fatty- and resin acid concentrations measured by GC–MS showed the differences between fresh and stored pine very clearly. The influence of the spruce fraction was less clear. However, the influence of the fatty- and resin acids on the pelletizing process could not be confirmed, indicating that other differences between fresh and stored pine sawdust have to be investigated. This work shows that it is possible to design the pelletizing process for moderate energy consumption and high pellet quality.     

新产品——钢带增强聚乙烯螺旋波纹管

钢带增强聚乙烯螺旋波纹管是一种创新的埋地排水管,把钢材的高刚度、高强度和聚乙烯的柔韧、耐腐结合在一起,突出的优点是环刚度高和节约原材料.     

建筑节能发展缓慢的原因及其对策

我国实施建筑节能已近10年，但仍然只停留在试点、示范的层面上，尚未扩大到整体．分析了造成建筑节能发展缓慢的原因，并提出了推行和普及建筑节能的对策．     

节能降耗提高矿山效益

节能降耗是每一个矿山提高经济效益的有效途径。我们采取提高球磨机处理能力，降低单耗；利用“分时计价”政策，采用“避峰作业”；使用新设备等措施节能降耗，提高矿山经济效益。     

CO2压缩机节油措施与效果

本分析了山西分公司二期CO2压缩机润滑油消耗高的原因，介绍了采取的针对措施以及2002年取得的节能效果，并进一步指出了CO2压缩机的节能空间。     

苯乙烯类嵌段共聚物的生产及市场分析

介绍了苯乙烯类嵌段共聚物(SBC)的国内外生产和消费情况，分析了我国SBC的市场前景，提出了加大研发力度、提高SBC生产术、扩大生产规模、提高国内市场占有率，建设多功能装置等建议。     

Consumption of solutions containing sodium chloride is enhanced in female oxytocin-deficient mice.

Intact and ovariectomized oxytocin (OT)-deficient (OT-/-) and wild-type (OT+/+) mice were tested for consumption of 0.5 M NaCl solution or tap water in a 2-bottle choice test. During 3 days of acclimation, voluntary ingestion of NaCl was equal between genotypes. After overnight fluid deprivation, intact OT-/- mice ingested 2 times more NaCl solution than OT+/+ mice in the 6th hr, but not the 1 st hr, after reintroduction of fluid. Ovariectomized mice consumed less than intact mice after overnight fluid deprivation. When a 0.2 M NaCl solution was administered for 6 days in ovariectomized mice, OT-/- mice voluntarily consumed greater amounts than OT+/+ mice. After overnight fluid deprivation, consumption by OT-/- mice was 3 times that of OT+/+ mice at 1 hr and 2-fold greater after 6 hr. Enhanced intake of NaCl-containing solutions in female OT-/- mice suggests that central OT may be an important inhibitor of sodium consumption. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Cost estimates to guide pre-selection of processes

A process is a method of shaping, joining or surface-treating a material. Process selection has three steps. The first is to identify from the ‘menu’ of all available processes, the subset, which can give a chosen material the desired shape with the desired detail, precision and finish. The second is to choose, from among these, the ones that will do so at the lowest cost. The final step is to investigate the most promising processes in depth, exploring considerations such as availability, in-house experience, safety and environmental issues. The first two steps can be thought of as process pre-selection. Components have to be assembled and finished to create products. Here too, the ability to rank by cost, however crudely, helps guide pre-selection. Cost models are reviewed from the perspective of material and process selection. An approximate model is useful provided it has generality—that is, it must allow comparison of very different processes. Many approaches fail in this. One that works, based on resource consumption, is developed here and its use for selection is illustrated. It has been implemented as part of a tool that allows rapid pre-selection from a database of 112 processes.