基于FLAC3D的破碎围岩巷道支护效果分析

为了解破碎围岩分别采用锚杆支护、锚喷支护以及锚喷+锚索耦合三种支护方式下的支护效果,进而为破碎围岩巷道选择合理的支护方式提供参考。通过借助FLAC^3D软件建立数值模型,分析不同支护条件下的破碎围岩巷道位移量、应力分布以及塑性区的时空演化特征。结果表明,采用锚喷+锚索耦合支护时,可以较好的控制巷道围岩的位移量、减小应力集中效应、缩小塑性区的影响范围。     

媒体融合背景下高校学生记者队伍培养策略

媒体融合发展是高校开展新闻宣传工作的必然要求，针对高校学生记者队伍建设中存在的问题，提出要以“选修课+线上学习资源+校内培训”为抓手，学习相关专业学科知识；以学校融媒体中心为基础，为学生记者提供实践平台；深化学生记者对媒体融合传播理念的认识，不断提升互联网思维和创新能力。     

建筑物掏土纠倾法单孔与多孔塑性区特性研究及工程应用

在建筑物水平掏土纠倾工程中，掏土孔间距是影响纠倾工程安全与工期的重要因素。为了快速准确地确定纠倾工程中的水平掏土孔间距，研究了单个掏土孔和多个掏土孔情况下孔周边土体塑性区发展特性。利用土体塑性力学分析计算得到了单孔下的孔周土塑性区半径，而后通过有限元模拟得到孔周土体塑性区半径的数值解，将孔周塑性区半径解析解与数值解进行了对比。并通过有限元数值模型研究了多个掏土孔相互影响情况下的塑性区发展规律，以孔间土体塑性区贯通时的距离作为掏土孔间距。考虑土体参数随机特性的影响，研究不同上部荷载作用下掏土孔间距的取值变化规律，上部面荷载与地基承载力特征值比值用p表示，孔间距与掏土孔直径比值用n表示。研究发现：多孔塑性区半径（孔间塑性区贯通时）是单孔塑性区半径的1.3倍左右;标准化荷载p与孔间距比值n二者呈线性关系;通过不同土体参数及上部荷载的不同情况下的p-n曲线，给出了掏土孔间距建议值。同时，将研究结果与三个实际工程进行对比，发现p-n曲线法与实际结果更为接近。     

基于云网PoP的弹性边缘网络设计思路探讨

移动边缘云是公司“云+5G”双引擎战略的最佳契合点,边缘网络是发挥移动云“大云”产品和5G网络融合优势,实现云网统筹、构建运营商“连接+计算”核心能力的关键。运营商传统接入网存在云网割裂、分段入云和组网复杂等突出问题,难以适应边缘业务敏捷交付要求。本文通过深入分析边缘云业务特征和技术架构,对标业界主流云商建设实践,研究基于云网PoP网的边缘网络建设思路,创新性提出云网一体化规划设计和建设交付流程变革,基于云网POP统一网络和业务锚点,构建Overlay和Underlay融合双层加速网络架构,探索Spine-leaf化的新型城域接入网实现L3下沉和弹性扩容等方法,实现“云+网+应用”一体化敏捷交付的边缘网络能力。     

Upregulated Expression of Activation-Induced Cytidine Deaminase in Ocular Adnexal Marginal Zone Lymphoma with IgG4-Positive Cells

Immunoglobulin G4-related disease (IgG4-RD) is a systemic disorder characterized by tissue fibrosis and intense lymphoplasmacytic infiltration, causing progressive organ dysfunction. Activation-induced cytidine deaminase (AID), a deaminase normally expressed in activated B-cells in germinal centers, edits ribonucleotides to induce somatic hypermutation and class switching of immunoglobulin. While AID expression is strictly controlled under physiological conditions, chronic inflammation has been noted to induce its upregulation to propel oncogenesis. We examined AID expression in IgG4-related ophthalmic disease (IgG4-ROD; n = 16), marginal zone lymphoma with IgG4-positive cells (IgG4+ MZL; n = 11), and marginal zone lymphoma without IgG4-positive cells (IgG4- MZL; n = 12) of ocular adnexa using immunohistochemical staining. Immunohistochemistry revealed significantly higher AID-intensity index in IgG4-ROD and IgG4+ MZL than IgG4- MZL (p < 0.001 and = 0.001, respectively). The present results suggest that IgG4-RD has several specific causes of AID up-regulation in addition to inflammation, and AID may be a driver of oncogenesis in IgG4-ROD to IgG4+ MZL.     

Process parameters influence on zone refining and thermodynamics analysis of 1,2-diphenylethane

Effective distribution coefficients of 9 impurities in 1,2-diphenylethane have been calculated by directional crystallization under different ambient frozen temperature. The effect of varied zone size, temperature difference between the melt and ambient frozen environment, number of zone on purity of 1,2-diphenylethane have been also investigated during the process of zone refining. The results indicate that the product purity in the intermediate purified region with varied zone size is higher 0.04%-0.2% than that with constant zone size. The product purity increases with temperature difference between the melt and ambient frozen environment. The appropriate temperature difference is adopted 50℃. The product purity in the intermediate region of sample bar with 2 molten zones is higher 0.05%-0.43% than that with 1 molten zone. In addition, the change of enthalpy and entropy between impurities and 1,2-diphenylethane have been determined.     

Effect of metallurgical evolution during post-weld aging treatment on localised corrosion of resistance spot welding joints of A286 superalloy

The combined effect of resistance spot welding and precipitation hardening on the localised corrosion of A286 superalloy is studied. The specimens tested by double loop electrochemical potentiokinetic reactivation were welded in the solution treated condition, and then subjected to different precipitation hardening treatments. For both base metal and weld nugget, the maximum localised corrosion is reached when η phase is clearly observable. The fact that the localised corrosion resistance of weld nugget is different from that shown by base metal may be explained by the segregation of Ni and Ti towards the interdendritic region of weld nugget (studied by using scanning electron microscope/energy dispersive X-ray analysis).     

毛细管区带电泳-间接紫外检测法测定婴儿配方奶粉中的胆碱

目的建立毛细管区带电泳-间接紫外检测法测定婴儿配方奶粉中胆碱含量的新方法。方法用5 mmol/L乙酸提取婴儿配方奶粉样品中的胆碱,涡旋混匀、9000 r/min离心,上清液经0.45μm醋酸纤维素滤膜过滤后进样。用未涂覆熔融石英毛细管75μm×70 cm(有效长度:60 cm)作为分离柱。以10 mmol/L磷酸二氢钠+20 mmol/L磷酸+7 mmol/L 4-甲基咪唑为分离缓冲体系。分离电压为28 k V,进样压力及时间为0.5 psi、10 s,检测波长为214 nm。结果胆碱的校正峰面积与质量浓度在8.7~86.8 mg/L范围内间线性关系良好,相关系数为0.9997、检出限为2.6 mg/L、定量限为8.7 mg/L,方法的日内和日间精密度分别为1.9%和3.9%(n=7)。3个质量浓度添加水平的平均加标回收率分别为98.8%、95.2%及97.6%,相应RSD分别为0.8%、0.9%及0.6%(n=5)。用本法分析了10件婴儿配方奶粉样品,均获满意结果。结论本方法简单、无需有机溶剂,适用于婴儿配方奶粉中胆碱的常规检测。     

Analysis of the convective heat transfer and flow behavior around two counter‐rotating side‐by‐side cylinders

This study presents details of the heat and fluid flow around two counter‐rotating cylinders. For this goal, three different nondimensional gap spaces such as G/D = 1.5, 2.0, and 3.0 are examined in the constant Reynolds number of 200 and Prandtl number of 7.0. In addition, computations are carried out at various nondimensional rotating speeds (R.S) in the range from 0 to 4. The obtained results are validated against the available data in the open literature for stationary cases. The results showed that the flow structure, vortex shedding process, and exerted forces on the cylinders strongly depended on the R.S and G/D. Reductions of the drag coefficients are observed for both cylinders with increasing the R.S due to suppression of the wake downstream of the cylinders at low R.S and eliminating the vortex shedding process at high R.S. Finally, it is demonstrated that, regardless of the G/D value, increasing the R.S diminishes dramatically the convective heat exchange rate between the cylinders and fluid flow.     

周期性隔震基础的优化设计与试验验证

周期性隔震基础是利用周期性结构的衰减域特性,将地震动与上部结构自振频率接近的频率范围内的能量衰减,从而控制上部结构响应的新型隔震装置。周期性基础的隔震性能受到多方面因素的影响,包括局域共振子的调谐频率比、质量比、阻尼比、基体的刚度、上部结构与基础的相互作用以及地震动的频谱特性等。目前尚未有研究综合考虑上述因素的影响并提出周期性基础的设计方法。提出以一组地震动作用下上部结构峰值响应衰减率的平均值为目标函数,对周期性基础进行优化的设计方法。计算结果表明,按照该优化方法得到的周期性基础对上部结构在选取的44条地震动作用下,峰值响应的平均衰减率达30%。参数敏感性分析表明,优化设计得到的周期性基础对于自身参数的变化具有良好的鲁棒性。最后利用缩尺振动台试验验证了优化设计得到的周期性基础的隔震性能,证明了优化方法的有效性和优化结果的正确性。