Reduction of sidelobe levels in multicarrier radar signals via the fusion of hill patterns and geometric progression

Multi-carrier waveforms have several advantages over single-carrier waveforms for radar communication. Employing multi-carrier complementary phase-coded (MCPC) waveforms in radar applications has recently attracted significant attention. MCPC radar signals take advantage of orthogonal frequency division multiplexing properties, and several authors have explored the use of MCPC signals and the difficulties associated with their implementation. The sidelobe level and peak-to-mean-envelope-power ratio (PMEPR) are the key issues that must be addressed to improve the performance of radar signals. We propose a scheme that applies pattern-based scaling and geometric progression methods to enhance sidelobe and PMEPR levels in MCPC radar signals. Numerical results demonstrate the improvement of sidelobe and PMEPR levels in the proposed scheme. Additionally, autocorrelations are obtained and analyzed by applying the proposed scheme in extensive simulation experiments.     

Spirobifluorene Dimers: Understanding How The Molecular Assemblies Drive The Electronic Properties

Spirobifluorene (SBF) is one of the most important scaffolds used in the design of organic semi-conductors (OSCs) for electronics. In recent years, among all the structures developed for these applications, SBF dimers have been highlighted due to their great potential in thermally activated delayed fluorescence and in phosphorescent organic light-emitting diodes. Attaching two SBF units generate 10 dimers, each possessing its own structural specificity, which in turn drives its electronic properties. These ten SBF dimers are gathered herein. Understanding how the molecular assembly determines the electronic properties has been one of the pillars of organic electronics. This is the goal of this article. As positional isomerism is a key tool to design OSCs, defining the design guidelines for the SBF scaffold appears of interest for the future of this building block. Herein, the importance of the two main parameters involved in the electrochemical and photophysical properties, namely the nature of the phenyl linkages and the steric congestion between the two SBF units is discussed. The combination of these two parameters drives the electronic properties but their respective weight is different as a function of the regioisomer involved or of the property considered (frontier orbitals energy level, absorption, fluorescence, phosphorescence).     

乡村振兴战略下地方文创产品设计实践研究

目的 从设计学角度探索乡村振兴战略下的文创产品助农模式，深入挖掘、继承和创新优秀的传统乡土文化，将保护、传承和开发利用结合起来，为中华农耕文明赋予新的时代内涵，并应用于平谷区设计实践，助力乡村第一产业和第三产业的发展。方法 依托情感化设计理论，构建文创助农模型，依托北京互联农业果蔬产业创新创业孵化实训基地，借助“以花为媒，营销平谷”的东风，验证模型的可行性。结果 在文创助农模型的基础上，充分挖掘平谷区地方特色文化，结合中国古代哲学系统观“五行”思想，开发五行桃花运势皂，对产品、外观包装及购买交互方式等方面进行深入设计研究，探索了地方特色文创产品设计创新的思路、方法和路径，突出了情感价值提升地方特色文创产品设计的重要作用。结论 文创助农模型能够促进乡村地区农副产品资源的二次利用，提高乡村区域知名度，拉动当地经济增长。     

基于章水泉竹艺非物质文化遗产的APP设计与研究

目的 针对章水泉竹艺非物质文化遗产在目前所遭遇的传承困境，利用数字媒体技术与互联网平台，打造推动其产品创新与文化传承的APP，助力其文化与产品的传播与推广，进而为湖北地区的非遗文化发展提供参考。方法 从章水泉竹器的本源出发，对其主要产品门类、工艺特点与艺术形式进行整理与分类，分析制约其传承与发展的主要原因，进而提出设计策略，并通过数字化传承、合作创新、成果推广3个策略模块针对性地进行APP设计。结论 章水泉竹艺APP设计通过利用数字媒体技术与互联网平台优势，将其历史与工艺资料进行数字化保存与展示，实现了文化保护功能；将其传统技艺与新锐设计思维通过线上平台进行融合与创新，实现了设计创新功能；将其制作流程与文化精髓通过直播与精准推送展现于公众视野，实现了产品推广功能。最终，为章水泉竹艺的传承与推广提供了新的路径。     

地域文化元素融入都江堰旅游产品的设计策略

目的 针对目前市面上都江堰旅游产品识别性较弱、同质化严重，对具有地域文化特色的旅游产品开发较少的问题，以地域文化元素作为都江堰旅游产品设计的核心，提出旅游产品的设计策略。方法 研究都江堰旅游产品设计，应从地域化和文化内涵入手。通过分析旅游产品现状，地域文化元素及新旅游时代背景下旅游产品的发展趋势，结合情感化设计理念，围绕用户体验进行探究，总结出都江堰旅游产品设计开发模式。以李冰石像和鱼嘴段水利工程元素为例，进行产品实践。结论 提出符合都江堰区域特色的旅游产品设计策略，即树立品牌意识、打造IP形象，以地域文化元素为设计核心，加强情感互动、与科技相融合的设计策略。赋予旅游产品更深层次的内涵，打造更多具有地域文化特色的旅游产品，从而推动历史文化与商业价值的融合，也能够为同类型旅游产品提供具有应用价值和参考的设计策略和思路。     

基于可供性的文化意象交互式智能音箱设计研究

目的 探索将文化民俗有效融入现代产品中的技术思路，保留并延续中华传统文化的生命力，有助于提升用户体验。方法 分析可供性与文化意象之间的主客观互通性;挖掘交互式智能音箱中的可供性触点;构建形态、感官、认知及情境四类可供性的设计框架;以楚文化意象为例进行设计实践，对智能音箱的产品造型与交互操作方式进行设计，并进行设计评价。结果 在可供性理论指导下的楚文化意象交互式智能音箱产品外观及交互体验设计较好地满足了设计目标和用户需求。结论 可供性有助于文化意象的正确提取与转化，可将意象抽象为具有实际意义的设计要素，帮助用户在生理与认知两个层面理解产品的使用方法，同时进一步回味、体验文化内涵和文化精髓。     

Charge source and the charging mechanism of the contact electrification of polymer powder

The charge sources, as well as the charging mechanism of the contact electrification (CE) of polymers, are still debatable. Since CE is accompanied by destruction, it is considered that “hard contacting” via ball milling can induce covalent bond scission and produce naked-activated-charge sources. Regarding “soft contacting” via nano-scale sliding, which does not induce covalent bond scission, a frontier-electron, “f-electron,” of the naked-activated-charge source is crucial to electron transfer among the naked-activated-charge sources. Here, we configure naked-activated-charge-source models, naked-activated-mechano-anion, and naked-activated-mechano-cation, which are produced by mechanical energy induced heterogeneous covalent bond scission, as well as naked-activated-mechano-radicals that are produced by homogeneous covalent bond scission. Regarding “soft contacting” among naked-activated-charge sources in a vacuum, f-electron can be transferred from a donor to an acceptor if the energy level of the donor is higher than that of the acceptor. The net amount of the normalized transferred-f-electrons is obtained by adopting settings in which the average energy level of the naked-activated-charge sources (as the donors) is higher than that of the sources employed as acceptors. Thus, the surfaces comprising the donors and acceptors will exhibit positive and negative net surface charges, respectively. We conclude that net surface charges depend on the average energy level of naked-activated-charge sources. Further, we observe that the alignment of polyethylene (PE)-polyvinyl chloride (PVC)-polytetrafluoroethylene (PTFE) to the average energy level is identical to that of the triboelectric series.     

Enhancement of a global lake and reservoir database to aid climate studies and resource monitoring utilizing satellite radar altimetry

Here, we describe the expansion and enhancement of a large (surface area ≥100 km²) lake and reservoir database (1.GREALD). These efforts have also resulted in the spin-off of two additional databases, one containing lakes and reservoirs (2.GREALD, area 10–99 km²), and the other containing ephemeral lakes (3.GELD, area ≥100 km²). These databases are unique sources for projects that utilize satellite radar altimeter data to monitor surface water levels. While 1.GREALD aims to be a complete catalog, 2.GREALD focuses on reservoirs in response to applied sciences programs that monitor water and energy resources. The creation of 3.GELD has climate change objectives as well as water resources and ecosystem conservation applications. The recording of information pertaining to the potential overpasses (waterbody crossings) of the current and archive satellite altimeters is a primary objective as is the need to highlight any form of controlled water level variation. The permanent water databases now contain 6282 entries, half experience some form of anthropogenic influence and ～430 have been identified as potential climatically sensitive terminal lakes. The revised integral surface area distribution is a power law with exponent ?1.016. Statistics reveal that with altimetric repeat visit times of 10-day to monthly, at least 80% of the permanent water bodies (≥10 km²) have been overflown at some period since the 1990s. Current information on water use and reservoir formation date show that the primary use of the reservoir class is hydroelectric power, and that China, Brazil, India, Turkey, and Vietnam dominate the dam building in recent decades.     

基于PSO-ELM模型的潜油柱塞泵冲次优化方法

为改进油井后期泵效低下、能耗高等缺陷，提出了一种基于PSO-ELM模型的潜油柱塞泵冲次优化方法.采用粒子群（PSO）算法与极限学习机（ELM）相结合的方式来实现动液面软测量建模；根据动液面及潜油柱塞泵工作电流变化，以油井运行经济性最优为目的建立目标函数得到潜油柱塞泵冲次，解决了在油井生产时不能准确调节抽油机冲次问题；最后以目标函数关系建立模糊控制器模型，根据输入参数调整潜油柱塞泵冲次.实验结果表明，建立的软测量模型预测动液面精度高，模糊控制器能够更加合理地调整抽油机冲次，最终达到智能调整冲次大小、提高油井采油率及节能的目的.     

医院级CT辐射剂量及诊断剂量水平研究

探讨医院级各部位CT扫描辐射剂量及成人CT检查诊断剂量水平。采集2018年2月—2019年1月本院在GE Light Speed 16 CT设备上进行诊断性CT检查的全部成年人共15 440例的CT检查数据,按照检查部位进行分类,统计各部位的容积剂量指数(CTDI_vol)、剂量长度乘积(DLP)。使用SPSS 19统计软件分析CTDI_vol、DLP的四分位数并计算有效剂量(ED)。结果表明,各部位CTDI_vol的诊断剂量参考水平(DRL)值为:颅脑87.75 mGy、肺部8.09 mGy、上下腹15.82 mGy、上下腹盆腔15.79 mGy;各部位DLP的诊断剂量参考水平(DRL)值为:颅脑1 053.03 mGy·cm、肺部245.19 mGy·cm、上下腹269.96 mGy·cm、上下腹盆腔835.20 mGy·cm。研究中发现肺部CTDI_vol、DLP的DRL值(分别为8.09 mGy、245.19 mGy·cm)低于我国其他地区和其他国家的DRL值;60岁以下患者肺部CT检查CTDI_vol、DLP的DRL值低于8.09 mGy、245.19 mGy·cm,60岁以上患者肺部CT检查CTDI_vol、DLP的DRL值高于8.09 mGy、245.19 mGy·cm。通过研究可以确定医院级各部位CT检查辐射剂量及成人CT检查诊断剂量水平,能为优化CT检查扫描技术和监测辐射剂量提供基础。