基于软件校准的短波发射机功率控制系统设计

短波发射机功率稳定一直是通信领域致力改善的重点问题,短波发射机功率不稳定会直接影响无线电通信质量,造成通信失真、表达不清晰等问题。针对上述问题,基于软件校准设计短波发射机功率控制系统。该系统借鉴MVC设计模式搭建系统数据库层、业务逻辑层、控制层以及界面显示层基础框架；将功率计与短波发射机相连,实时采集工作状态下的短波发射机功率数据,通过信号处理器实施处理后并存储,借鉴传输元件,将数据发送到控制器,通过控制器校准短波发射机功率与预期之间的偏差,以偏差量为输入,利用改进PID运算得出控制量,生成控制命令,通过输入输出信号接口板输出命令,控制驱动装置调节短波发射机运行参数,实现功率控制。结果表明：与 控制系统、自动调谐系统应用相比较,在所设计系统应用控制下,100s内短波发射机的功率变化曲线与预期曲线之间的拟合优度指数更大,更接近1,优于对比系统,说明相比于对比系统。本系统控制表现更好,更能维持短波发射机功率稳定,达到了研究目标。     

雷达发射机浮动板调制器与故障检测电路的设计

提出了一种改进的浮动板调制器和对正负偏电压的故障检测电路,利用MOSFET寄生电容特性,通过固定脉宽窄脉冲控制调制脉宽,通过增加负偏MOSFET提高输出负偏电压。对故障检测电路进行仿真实验,通过模拟故障,验证故障检测报警信号发生时间均在微秒级别。完成样机的搭建,利用多重方式解决高压绝缘问题,并对其加电进行试验验证,分析实验波形,证明此电路满足设计要求并且具有可行性。     

In Silico Study on Tumor-Size-Dependent Thermal Profiles inside an Anthropomorphic Female Breast Phantom Subjected to Multi-Dipole Antenna Array

Electromagnetic hyperthermia as a potent adjuvant for conventional cancer therapies can be considered valuable in modern oncology, as its task is to thermally destroy cancer cells exposed to high-frequency electromagnetic fields. Hyperthermia treatment planning based on computer in silico simulations has the potential to improve the localized heating of breast tissues through the use of the phased-array dipole applicators. Herein, we intended to improve our understanding of temperature estimation in an anatomically accurate female breast phantom embedded with a tumor, particularly when it is exposed to an eight-element dipole antenna matrix surrounding the breast tissues. The Maxwell equations coupled with the modified Pennes’ bioheat equation was solved in the modelled breast tissues using the finite-difference time-domain (FDTD) engine. The microwave (MW) applicators around the object were modelled with shortened half-wavelength dipole antennas operating at the same 1 GHz frequency, but with different input power and phases for the dipole sources. The total input power of an eight-dipole antenna matrix was set at 8 W so that the temperature in the breast tumor did not exceed 42 °C. Finding the optimal setting for each dipole antenna from the matrix was our primary objective. Such a procedure should form the basis of any successful hyperthermia treatment planning. We applied the algorithm of multi for multi-objective optimization for the power and phases for the dipole sources in terms of maximizing the specific absorption rate (SAR) parameter inside the breast tumor while minimizing this parameter in the healthy tissues. Electro-thermal simulations were performed for tumors of different radii to confirm the reliable operation of the given optimization procedure. In the next step, thermal profiles for tumors of various sizes were calculated for the optimal parameters of dipole sources. The computed results showed that larger tumors heated better than smaller tumors; however, the procedure worked well regardless of the tumor size. This verifies the effectiveness of the applied optimization method, regardless of the various stages of breast tumor development.     

Interfacial energy for solutions of nanoparticles,surfactants, and electrolytes

The addition of surfactants to modify the surface property of nanoparticles (NPs) from hydrophilic to hydrophobic also enhances their interfacial properties. Several approaches were previously proposed to calculate the surface tension/interfacial tension (IFT) for different systems in the presence of NPs, surfactants, and electrolytes. However, most of these approaches are indirect and require several measured parameters. Therefore, a mathematical model is developed here to calculate the surface tension/IFT for these systems. The developed model takes into account the cohesive energy due to the interaction of the surfactant CH₂ groups, the electric double layer effect due to the interaction among the ions of NPs, surfactants, and electrolytes, and the dipole–dipole interaction of NPs and electrolytes. The developed model is compared and validated with the laboratory experimental data in literature. The results reveal further understanding of the mechanisms involved in stabilization of oil/water emulsion in the presence of NPs, surfactants, and electrolytes.     

基于紧耦合结构的宽带基站天线设计

随着5G移动通信频段的公布,传统基站天线已不足以覆盖其工作频段。文章以紧耦合阵列天线理论为基础,提出了一种基于紧耦合结构的交叉偶极子宽带基站天线。该天线由两对正交的领结状偶极子天线构成,通过两对交叉偶极子之间的耦合效应,有效地展宽了天线的阻抗带宽。同时,通过在天线和金属反射板之间加载电阻型频率选择表面,吸收由反射板引入的谐振反射波,改善天线高频端辐射性能。仿真及测试结果表明:该天线在1.7-3.6 GHz 频率范围内,可以满足基站天线的设计指标,两端口驻波比均小于1.5,两端口之间隔离度大于55 dB,半功率波束宽度满足65°±5°范围,且整个频段内增益均大于8.5 dBi。     

Laser cooling of solids containing local centers with electric dipole allowed transitions: a feasibility study

Various insulating materials containing local centers with electric dipole allowed transitions were studied under excitation in the long-wavelength tail of the absorption spectrum (“laser cooling regime”). Though no actual cooling was detected, spectra with a strong anti-Stokes component were observed which demonstrate the possibility to employ electron–phonon bands of electric dipole allowed transitions for optical refrigeration. The mechanisms responsible for the absence of observable optical refrigeration are discussed.     

Origin of the temperature stability of dielectric constant in CaCu3Ti4O12

The temperature and dc bias stability of the dielectric constant and loss tangent of CaCu₃Ti₄O₁₂ samples sintered under different oxygen atmospheres are discussed. The results suggest that the metal-oxygen vacancy related defects not only provide the charge carriers for the conduction (defect doping) but also contribute to the huge permittivity in the way of defect dipoles repositioning under charge carrier hopping. The charge localization in a specific copper-oxygen vacancy defect complex is the reason of the huge and stable permittivity and low dielectric loss in the middle temperature range, 90 K-200 K (20 Hz), while the implementation of the large barrier layer height needs a contribution by the titanium oxygen vacancy related trap charges in the grain boundaries, which also lead to a second permittivity stable range in a higher temperature range 200 K–300 K.     

Double polarization hysteresis and dramatic influence of small compositional variations on the electrical properties in Bi4Ti3O12 ceramics

This work reports the existence of double polarization hysteresis (P–E) loop in Aurivillius-phase ferroelectric Bi₄Ti₃O₁₂ (BiT) and reveals dramatic influence of small compositional variations on the electrical properties of it. The double polarization hysteresis is a characteristic of the interaction of defects with domain walls. This characteristic becomes more pronounced in Bi-deficient and Mg-doped BiT due to an increase in oxygen vacancy concentration at the lattices. Normal and saturated P–E loop is recalled by Nb donor doping, and associated composition Bi₄Ti_2.97Nb_0.03O_12.015 (BiT-0.03Nb) shows high remnant polarization (P_r = 12.5 μC/cm²) and large field-induced strain (S₃₃ = 5.6 × 10^?4). In addition, this doping results in bulk conductivity (σ_b) of BiT decreasing dramatically and associated activity energy (E_a) increasing significantly. In contrast, high oxide ion conductivity is induced with Mg²⁺ acceptor doping, and at 600 °C the optimum composition has ionic conductivity of ?0.65 × 10^?2 S cm^?1 in the bulk.     

热处理工艺对3J53合金组织及性能的影响

研究了热处理工艺对测量膜片材料3J53合金组织性能的影响。结果表明,3J53合金在920～1010℃温度区间固溶处理10 min时可获得均匀细小的晶粒组织和较低的硬度。并且,在980℃固溶温度下,合金晶粒尺寸的大小随固溶时间的增长变化不明显。进一步研究证明,3J53合金经920～1010℃×10 min固溶+670℃×5 h时效后,硬度为302～346 HV0.2,无法满足压力变送器要求。但经920℃固溶+冷轧+650～700℃×5 h时效处理后,材料的硬度显著提高。同时,当时效处理温度为670℃时,硬度达到峰值483 HV0.2,满足核级压力变送器要求。与进口产品对比发现,研制的3J53合金测量膜片样品的硬度、回差性能和原始量程温度影响性能均无显著差异,满足国产化应用要求。     

Fabrication of Calix[]arene Derivative Monolayers to Control Orientation of Antibody Immobilization

Three calix[4]arene (Cal-4) derivatives which separately contain ethylester (1), carboxylic acid (2), and crownether (3) at the lower rim with a common reactive thiol at the upper rim were synthesized and constructed to self-assembled monolayers (SAMs) on Au films. After spectroscopic characterization of the monolayers, surface coverage and orientation of antibody immobilized on the Cal-4 derivative SAMs were studied by surface plasmon resonance (SPR) technique. Experimental results revealed that the antibody could be immobilized on the Cal-4 derivatives spontaneously. The orientation of absorbed antibody on the Cal-4 derivative SAMs is related to the SAM’s dipole moment. The possible orientations of the antibody immobilized on the Cal-4 derivative 1 SAM are lying-on or side-on, while on the Cal-4 derivative 2 and Cal-4 derivative 3 head-on and end-on respectively. These experimental results demonstrate the surface dipole moment of Cal-4 derivative appears to be an important factor to antibody orientation. Cal-4 derivatives are useful in developing site direct protein chips.