Robust Metallic Actuators Based on Nanoporous Gold Rapidly Dealloyed from Gold–Nickel Precursors

Dealloyed nanoporous gold (np-Au) has applications as oxygen reduction catalysis in Li-air batteries and fuel cells, or as actuators to convert electricity into mechanical energy. However, it faces the challenges of coarsening-induced structure instability, mechanical weakness due to low relative densities, and slow dealloying rates. Here, monolithic np-Au is dealloyed from a single-phase Au₂₅Ni₇₅ solid-solution at a one-order faster dealloying rate, ultra-low residual Ni content, and importantly, one-third more relative density than np-Au dealloyed from conventional Au₂₅Ag₇₅. The small atomic radius and low dealloying potential of the sacrificing element Ni are intrinsically beneficial to fast produce high relative density np-Au, as predicted by a general model for dealloying of binary alloys and validated by experiments. Stable, durable, and reversible actuation of np-Au takes place under cyclic potential triggering in alkaline and acidic electrolytes with negligible coarsening-induced strain-shift. The thermal and mechanical robustness of bulk np-Au is confirmed by two-order slower ligament coarsening rates during annealing at 300 °C and 45 MPa macroscopic yielding strength distinctive from the typical early onset of plastic yielding. This article opens a rich direction to achieve high relative density np-Au which is essential for porous network connectivity, mechanical strength, and nanostructure robustness for electrochemical functionality.     

Maskless Preparation of Spatially-Resolved Plasmonic Nanoparticles on Polydimethylsiloxane via In Situ Fluoride-Assisted Synthesis

Here, a fluoride-assisted route for the controlled in-situ synthesis of metal nanoparticles (NPs) (i.e., AgNPs, AuNPs) on polydimethylsiloxane (PDMS) is reported. The size and coverage of the NPs on the PDMS surface are modulated with time and over space during the synthetic process, leveraging the improved yield (10×) and faster kinetics (100×) of NP formation in the presence of F⁻ ions, compared to fluoride-free approaches. This enables the maskless preparation of both linear and step gradients and patterns of NPs in 1D and 2D on the PDMS surface. As an application in flexible plasmonics/photonics, continuous and step-wise spatial modulations of the plasmonic features of PDMS slabs with 1D and 2D AgNP gradients on the surface are demonstrated. An excellent spatially resolved tuning of key optical parameters, namely, optical density from zero to 5 and extinction ratio up to 100 dB, is achieved with AgNP gradients prepared in AgF solution for 12 minutes; the performance are comparable to those of commercial dielectric/interference filters. When used as a rejection filter in optical fluorescence microscopy, the AgNP-PDMS slabs are able to reject the excitation laser at 405 nm and retain the green fluorescence of microbeads (100 µm) used as test cases.     

Modification of the wood-plastic composite for enhancement of formaldehyde clearance and the 3D printing application

As the formaldehyde is one of the main indoor pollutants, the purpose of this study is to effectively remove indoor formaldehyde pollution by using environmentally friendly 3D printing ornaments. The wood 3D printing filaments cellulose/polylactic acid composite (Cellu/P) was selected as the starting material, and 3-aminopropyltriethoxysilane (APTES) was used for chemical modification to obtain a series of cellulose composite materials with amino groups. The modified composite materials (APTES@Cellu/P) were characterized by Fourier transform infrared, X-ray diffraction, scanning electron microscope, energy dispersive spectroscopy, thermogravimetric analysis, and mechanical tests, and a formaldehyde removal experiment was performed. The feasibility of 3D printing was evaluated, and the process of 3D printing-functionalized customized ornaments was proposed, and then a school emblem was used for modeling, printing, and surface modification. Compared with the commercially traditional activated carbon, 3D printing-customized ornaments of APTES@Cellu/P material has a better formaldehyde removal effect, and can even avoid the secondary pollution that is common to the activated carbon.     

木质纤维与水泥共同改良软土的力学性能与微观机制分析

通过压实试验、无侧限抗压强度试验和劈裂试验,分析不同木质纤维含量、水泥含量和固化时间对软土力学性能的影响规律,探讨木质纤维、水泥改良软土的微观机制。结果表明,木质纤维的加入对水泥改良软土的击实特性有显著的影响;木质纤维与水泥可有效改善土体的抗压和劈裂抗拉强度,随着木质纤维含量的增加,改良土的抗压和劈裂抗拉强度呈现出明显的“驼峰”现象,并在木质纤维含量为0.25%时最大;木质纤维与水化产物、软土颗粒形成互锁效应,增大了改良土的摩擦力,同时木质纤维还承担一定的拉伸强度,使改良土的劈裂强度增加。     

Black phosphorous nanosheets–gold nanoparticles–cisplatin for photothermal/photodynamic treatment of oral squamous cell carcinoma

To improve five-year survival rate of oral squamous cell carcinoma (OSCC), the development of a novel composite material of black phosphorus nanosheets (BPNSs) and gold nanoparticles (AuNPs) for tumor treatment was carried out. The purpose of this study is to evaluate the cytostatic effects of BPNSs, AuNPs loaded with cisplatin (CDDP) on human tongue squamous cell carcinoma cells lines (SCC-9), and 7,12-dimethylbenz anthracene induced cheek squamous cell carcinoma was validated in golden hamsters animal models. The results showed that BPNSs could efficiently inhibit the metastasis and growth of OSCC compared with CDDP and AuNPs. And a combination composite of AuNPs–BPNSs loaded with CDDP could more effectively inhibit the metastasis and growth of OSCC, which might be due to the high drug-loading capacity, excellent photothermal properties and the combination of photodynamic and photothermal therapy of BPNSs and AuNPs, as well as the synergistic effects of AuNPs, BPNSs and CDDP.     

Rapid Synthesis and Antiproliferative Properties of Polyazamacrocycle-Based Bi- and Tetra-Gold(I) Phosphine Dithiocarbamate Complexes

A family of bi- and tetrametallic gold(I) phosphine dithiocarbamate complexes were synthesized, starting from cyclam and dimethylcyclam polyazamacrocycles, respectively, along with their monometallic gold(I) chloridophosphine precursors. Their antiproliferative properties were evaluated on two cancer cell lines (A549 and NSCLC-N6-L16). Most of the mono- and bimetallic complexes displayed strong activities and, in particular, one bimetallic derivative showed antiproliferative properties in the low micromolar range. Insights into the structure–activity relationships are given, along with determination of the thioredoxin reductase inhibition potential, two-photon imaging of the fluorescent derivatives, and evaluation of gold uptake.     

液体乳中三聚氰胺的快速检测产品评价研究

目的 评价液体乳中三聚氰胺的快速检测产品。方法 采用空白基质加标的方式制备了三聚氰胺3个不同浓度水平的牛奶盲样，并验证盲样的均匀性和稳定性，对3个不同厂家的三聚氰胺胶体金试纸条、3台不同的便携式拉曼光谱仪进行评价测试，系统性地研究了快速检测产品评价方法。结果 评价结果表明，各快速检测产品灵敏度分别为100%（5个）和99.3%（1个），特异性均为100%，假阴性率为0%（5个）和0.7%（1个），假阳性率均为0%。结论 本研究用于液体乳中三聚氰胺检测的快速检测产品符合性能指标的要求，满足市场监管的需要。     

胶体金免疫层析法定量检测鱼和虾中苯巴比妥残留

建立了一种快速定量检测水产品鱼和虾中苯巴比妥残留的胶体金免疫层析方法。采用胶体金纳米粒标记苯巴比妥单克隆抗体,研究了胶体金免疫层析条件如标记体系p H值、标记抗体浓度、检测T线包被原浓度、质控C线羊抗鼠Ig G浓度、样品前处理方法等对胶体金灵敏度的影响,并借助胶体金试纸条读数仪进行定量检测。结果表明:方法检出限为0.07 ng/mL,线性范围0.08～0.94ng/m L,裸眼消线值(cut-off值)为10.0 ng/mL。方法特异性良好,与巴比妥、戊巴比妥、异戊巴比妥三种结构类似物交叉反应率小于10%。选择罗非鱼、草鱼、鲈鱼和虾进行添加回收试验,样品回收率在73.50%～114.17%之间,相对标准偏差小于15%,且结果与UPLC-MS/MS法一致。该方法具有准确、灵敏、简便、快速等特点,非常适用于水产品鱼和虾中苯巴比妥残留现场快速筛查。     

陕西省略阳县干河坝金矿地质特征及矿床成因探讨

干河坝金矿床是南秦岭南段勉略康构造混杂岩带内属受岩相和构造双重控制的构造蚀变岩型金矿床。该矿床的矿体集中产于古生界泥盆系金家河岩组金家河千枚岩与乔子沟火山岩的岩性—构造接触带附近，多呈似层状、透镜状。为进一步探讨该矿床成因，通过对矿床成矿地质特征、地球化学背景及硫同位素的系统研究，认为：①该矿床的赋矿层位就是其初始矿源层；②经区域变质变形和多期构造活动，初始矿源层中的成矿物质活化、迁移，在近EW向张性裂隙中充填、沉淀而富集成矿。     

非常规蛋白基木材胶黏剂研究现状及发展前景

介绍了动物和植物型非常规蛋白资源的种类及其制备蛋白基木材胶黏剂的研究现状和存在的问题,展望了非常规蛋白胶黏剂的发展前景。