Direct ink writing of vancomycin-loaded polycaprolactone/ polyethylene oxide/ hydroxyapatite 3D scaffolds

Novel inks were formulated by dissolving polycaprolactone (PCL), a hydrophobic polymer, in organic solvent systems; polyethylene oxide (PEO) was incorporated to extend the range of hydrophilicity of the system. Hydroxyapatite (HAp) with a weight ratio of 55–85% was added to the polymer-based solution to mimic the material composition of natural bone tissue. The direct ink writing (DIW) technique was applied to extrude the formulated inks to fabricate the predesigned tissue scaffold structures; the influence of HAp concentration was investigated. The results indicate that in comparison to other inks containing HAp (55%, 75%, and 85%w/w), the ink containing 65% w/w HAp had faster ink recovery behavior; the fabricated scaffold had a rougher surface as well as better mechanical properties and wettability. It is noted that the 65% w/w HAp concentration is similar to the inorganic composition of natural bone tissue. The elastic modulus values of PCL/PEO/HAp scaffolds were in the range of 4–12 MPa; the values were dependent on the HAp concentration. Furthermore, vancomycin as a model drug was successfully encapsulated in the PCL/PEO/HAp composite scaffold for drug release applications. This paper presents novel drug-loaded PCL/PEO/HAp inks for 3D scaffold fabrication using the DIW printing technique for potential bone scaffold applications.     

Extraction and characterization of hydroxyapatite-based materials from grey triggerfish skin and black scabbardfish bones

The conversion of food industry by-products to compounds with high added value is nowadays a significant topic, for social, environmental, and economic reasons. In this paper, calcium phosphate-based materials were obtained from black scabbardfish (Aphanopus carbo) bones and grey triggerfish (Balistes capriscus) skin, which are two of the most abundant fish by-products of Madeira Island. Different calcination temperatures between 400 and 1000°C were employed. Materials obtained from calcination of bones of black scabbard fish were composed by homogeneous mixtures of hydroxyapatite (Ca₁₀(PO4)₆(OH)₂, HAp) and β-tricalcium phosphate (β-Ca₃(PO₄)₂, β-TCP). Because of the high biocompatibility of HAp and the good resorbability of β-TCP, these natural biphasic materials could be very relevant in the field of biomaterials, as bone grafts. The ratio between HAp and β-TCP in the biphasic compound was dependent on the calcination temperature. Differently, the material obtained from skin of grey triggerfish contained HAp as the main phase, together with small amounts of other mineral phases, such as halite and rhenanite, which are known to enhance osteogenesis when used as bone substitutes. In both cases, the increase of calcination temperature led to an increase in the particles size with a consequent decrease in their specific surface area. These results demonstrate that from the fish by-products of the most consumed fishes in Madeira Island it is possible to obtain bioceramic materials with tunable composition and particle morphology, which could be promising materials for the biomedical field.     

Characterization,in vitro bioactivity and biological studies of sol-gel-derived TiO2 substituted 58S bioactive glass

Bioactive glasses (BGs) have been used for bone formation and bone repair processes in recent years. This study investigated the titanium substitution effect on 58S BGs (Ti-BGs) 60SiO₂-(36 − X)CaO-4P₂O₅-XTiO₂ (X = 0, 3, and 5 mol.%) prepared by the sol-gel technique, and the main goal was to find the optimum amount of titanium in Ti-BGs. Synthesized BGs, which were investigated after immersion in simulated body fluid (SBF), were tested by X-ray diffraction (XRD) analysis, Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy. Moreover alkaline phosphate (ALP) activity, 3-(4,5dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, and antibacterial studies were employed to investigate the biological properties of Ti-BGs. According to the FTIR and XRD test results, hydroxyapatite (HA) formation on Ti-BGs surfaces was confirmed. Meanwhile, the presence of 5 mol.% compared to 3 mol.% increased the HA grain distribution and their size on the Ti-BGs surface. Additionally, MTT and ALP results confirmed that the optimal amount of titanium substitution in BG was 5 mol.%. Since 5 mol.% Ti incorporated BG (BG-5) had the highest biocompatibility level, antibacterial properties, maximum cell proliferation, and ALP activity among the synthesized Ti-BGs, it is presented as the best candidate for further in vivo investigations.     

羟基磷灰石作为催化材料的研究进展

羟基磷灰石(HAP)由于具有无毒性、生物相容性、热稳定性、吸附性、离子交换性、结构稳定性等,因而被广泛应用到催化剂的制备中。作为一种新型催化材料,HAP的特殊晶体结构对一些反应表现出催化活性,并且经过改性、负载等方法处理过后的HAP催化剂显示出独特的催化优势。基于近年来HAP在催化邻域的发展,综述了HAP作为催化材料在降解污染物、制氢、药物合成、还原氮氧化物等反应中的不同应用,并对未来的研究方向进行了展望。     

Compressive and flexural properties of novel polylactic acid/hydroxyapatite/yttria-stabilized zirconia hybrid nanocomposite scaffold

The mechanical property is a crucial factor in the design of bone tissue engineering scaffolds. In the current study, novel PLLA (Poly-L-lactic acid)–Hydroxyapatite (HA)–yttria-stabilized zirconia (YSZ) nanocomposite scaffold with various compositions was prepared and characterized. The effect of HA and YSZ contents on the mechanical behavior of the resultant composites was investigated. TEM micrograph revealed that HA particles are needle-like in shape and nano in size. Scanning electron microscopy (SEM) micrograph also showed that YSZ powder is in granule form and submicron size. SEM disclosed that all scaffolds had a highly interconnected porous structure and X-ray diffractometry revealed that there were some molecular interactions between PLA (Polylactic acid), HA, and YSZ in the composites. The results depicted that introducing YSZ to the nanocomposite leads to a significant increase in compressive strength, modulus, and densification strain. In addition, flexural strength and modulus showed an upward trend by adding YSZ particles to scaffolds. It should be noted that PLA–20%HA–20%YSZ indicates the highest strength and modulus in both compression and bending tests, though, it did not demonstrate the proper strain compared to other scaffolds. Thus, PLA–15%HA–15%YSZ has been reported as the best candidate due to appropriate strength and strain. Also, energy absorption in nanocomposites showed an upward trend by increasing the amount of YSZ particles. It was found that the strength of samples was declined after being soaked in simulated body fluid. However, scaffolds with HA underwent more decrease in strength compared to samples containing YSZ.     

Surfactant-free electrochemical synthesis of fluoridated hydroxyapatite nanorods for biomedical applications

Fluoridated hydroxyapatite (FHA) [Ca₁₀(PO₄)₆F_x(OH)_2−x, x = 0–2] is believed to be a promising calcium phosphate (CaP) to replace pure hydroxyapatite (HA) for next-generation implants, owing to its better biocompatibility, higher antibacterial activity, and lower solubility. Notably, the shape and size of the CaP crystals play key roles in their performance and can influence their applications. One-dimensional (1D) FHA nanorods are important CaP materials which have been widely used in regenerative medicine applications such as restorative dentistry. Unfortunately, the traditional synthesis methods for FHA nanorods either employ surfactants or take a relatively long time. In this study, we aimed to propose a facile synthesis route to fabricate FHA nanorods without any surfactants using an electrochemical deposition method for the first time. This study focused on preparing FHA nanorods without the assistance of any surfactant, unlike the traditional synthesis methods, to avoid chemical impurities. FHA nanorods with lengths of 124–2606 nm, diameters of 28–211 nm, and aspect ratios of 4.4–21.8 were synthesized using the electrochemical method, followed by a heat treatment. For the as-synthesized FHA nanorods, the Ca/P ratio was 1.60 and the atomic concentration of F was 2.06 at.%. An ultrastructure examination revealed that each FHA nanorod possessed long-range order, good crystallinity, and a defect-free lattice with a certain crystallographic plane orientation along the whole rod. In short, we propose a novel, surfactant-free, cost-saving, and more efficient route to synthesize FHA nanorods which can be widely applied in multiple biomedical applications, including drug delivery, bone repair, and restorative dentistry.     

Ultrasonication‐Induced Modification of Hydroxyapatite Nanoparticles onto a 3D Porous Poly(lactic acid) Scaffold with Improved Mechanical Properties and Biocompatibility

A 3D porous poly(lactic acid) (PLA) scaffold with high porosity and well‐connected pores is fabricated using a vacuum‐assisted solvent casting technique. Its surface is modified with hydroxyapatite (HA) nanoparticles using ultrasonication to prepare an HA‐modified PLA/HA scaffold. For reference, an HA‐blended (b‐PLA‐HA) scaffold is fabricated via the solution blending method. The morphology, porosity, hydrophilicity, swelling ratio, mechanical properties, and cell viability of the PLA, b‐PLA‐HA, and PLA/HA scaffolds are systematically studied. The results show that HA nanoparticles are successfully introduced onto the surface of the PLA/HA scaffold, and strong interactions occur between the HA nanoparticles and the PLA matrix. The PLA/HA scaffold still has a high porosity of more than 85% after ultrasonication. The hydrophilicity and mechanical properties of the PLA/HA scaffold are significantly higher than those of the PLA and b‐PLA‐HA scaffolds. Compared with the PLA and b‐PLA‐HA scaffolds, the attachment and growth of mouse embryonic osteoblasts cells (MC3T3‐E1) cultured on the PLA/HA scaffold significantly improve, due to most HA nanoparticles on the surface, resulting in a good and direct interaction between the cells and the scaffold. Therefore, the PLA/HA scaffold possesses great potential to be used as a tissue engineering scaffold.     

Influence of iron doping towards the physicochemical and biological characteristics of hydroxyapatite

Hydroxyapatite (HAP) is the naturally occurring mineral form of calcium apatite and the most studied material as a bone substituent. Considering HAP's inherent properties, this study explored changes in HAP's characteristics from doping with other metals such as Fe. To form pure HAP and Fe-HAP with different amounts of Fe, we used the hydrothermal approach, and the composites that formed were thoroughly analyzed for their crystallinity, surface bonding, morphology, magnetic behavior, mechanical strength, biocompatibility, hemocompatibility, and in vitro cytotoxicity. The powder XRD studies confirmed the samples' crystallinity, and the lowest crystalline size was 19.7 nm in 10Fe-HAP. The FTIR analysis confirmed the formation of HAP by the hydroxyl, phosphate, and carbonate groups. The FESEM demonstrated that the morphology of the pure HAP was rod-shaped, which transformed into spheres after Fe doping. The EDS analysis confirmed the successful formation of HAP and Fe-HAP composites. The magnetic studies indicated the diamagnetic behavior of the pure HAP, while the Fe-doped HAPs had a superparamagnetic nature with saturation magnetizations (M_s) of 2Fe-HAP, 4Fe-HAP, and 10Fe-HAP at 0.0062, 0.0092, and 0.029 emu/g respectively. Assessment of the mechanical properties, biocompatibility, hemocompatibility, and cytotoxicity indicated that the Fe-doped HAPs were superior to the pure HAP, and among the Fe-HAPs, the 10Fe-HAP) had the highest amount of Fe and the best characteristics. The studies also indicated that Ca²⁺ interactions influenced the cells via HAP doping with that of Fe, equally increasing the physicochemical and biological properties.     

Disclosing the role of surface and bulk erosion on the viscoelastic behavior of biodegradable poly(ε-caprolactone)/poly(lactic acid)/hydroxyapatite nanocomposites

In this study, biodegradable polymer blends and their nanocomposites were prepared using poly(ε-caprolactone) (PCL) and poly(lactic acid) (PLA) as blending components and hydroxyapatite (HA) nanoparticles as reinforcement. X-ray diffraction spectra showed that the presence of HA nanoparticles enhanced the intensity of the peaks (100) and (200) corresponding to the PCL's crystalline planes. The transmission electron microscopy images confirmed the high tendency of HA nanoparticles to locate in the PLA phase. The water uptake values of samples measured at pH 4 were more than those measured at other pH values. The weight loss behavior of blends in acidic medium was completely different from that in basic and neutral media. The Williams–Landel–Ferry equation and time–temperature superposition principle were applied to the creep compliance of the samples and their master curves were determined at reference temperature of 30 °C, and the mechanical properties of samples were predicted in other conditions. The effect of pH on the creep–recovery response of studied samples was analyzed. From this analysis, it could be found that at pH 4, the creep stain increased, while, at pH 7, there was no a significant change in the viscoelastic property. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47151.