游戏机手柄热流道立式注塑4层叠层注塑模设计

设计了一种4层叠层模用于实现游戏机手柄的高效率注塑生产，解决了塑件成型时在保证塑件成型精度的基础上，单次注塑量产数量4倍倍增难题。4层叠层模的结构由4层结构相同的单层模具通过一定的空间组序排列组装后，应用立式注塑机来进行注射成型。单层模结构设计采用两板式2次开模热流道浇注两板模形式，第一次开模用于热流道嘴与塑件的冷流道部分分离，第二次开模用于塑件从型腔镶件中脱模脱出。为解决单层模做4层叠层组合后，顶出板无动力顶出的问题，在单层模的模架模板侧边对称设置了拉杆，将单层模在开模动力转化为单层模中顶出板的顶出拉力，巧妙地解决了单层模做4层叠层安装后各单层模的顶出元件顶出板无推动力的问题。模具结构布局及机构的驱动设置设计合理，有较好的工程设计参考意义。     

Lateral buckling analysis of thin-walled laminated composite beams with monosymmetric sections

Lateral buckling of thin-walled composite beams with monosymmetric sections is studied. A general geometrically nonlinear model for thin-walled laminated composites with arbitrary open cross-section and general laminate stacking sequences is given by using systematic variational formulation based on the classical lamination theory. All the stress resultants concerning bar and shell forces are defined, and nonlinear strain tensor is derived. General nonlinear governing equations are given, and the lateral buckling equations are derived by linearizing the nonlinear governing equations. Based on the analytical model, a displacement-based one-dimensional finite element model is developed to formulate the problem. Numerical examples are obtained for thin-walled composite beams with monosymmetric cross-sections and angle-ply laminates. The effects of fiber orientation, location of applied load, modulus ratio, and height-to-span ratio on the lateral buckling load are investigated. The torsion parameter and a newly-defined composite monosymmetry parameter are also investigated for various cases.     

层压方法对功率型LTCF变压器结构及性能的影响

采用双层硅胶加盖不锈钢材质层压板的层压方法制备功率型低温共烧铁氧体(LTCF)变压器。通过断面显微结构、电感值及耐压的测试,研究了层压方法对其结构及性能的影响。结果表明,相对于传统的层压方法,新方法制作的变压器层压受力均匀、表面不平整度≤±5μm/10 mm,无凸起、分层,排胶烧结过程中未出现开裂、翘曲等缺陷,显微结构理想。变压器性能为,初级电感:≥60μH、次级电感:≥2.6 m H、漏感:≤35μH、耐压:≥1500V(DC),且满足高低温应用环境(-55~+85℃)下磁性能使用可靠性和环境适应性要求。     

面向实用化的第二代高温超导带材研究进展

自20世纪80年代钇钡铜氧化合物被发现具有超导电性以来,它受到了世界范围内研究者的广泛关注。该材料具有高不可逆场、高超导转变温度、高临界电流密度等本征物理优势。这种材料以薄膜外延沉积在织构柔性金属基带上,被称为第二代高温超导带材。近年来,国内外数家科研机构和公司解决了生产公里级超导带材的技术瓶颈,已能够批量生产第二代高温超导带材,极大地推动了超导示范工程的开展。此外,超导带材用户单位也从应用角度向超导带材性能提出新的要求,拉动了超导带材材料的发展。本文结合国内外二代超导带材发展的主要趋势,重点介绍面向实用化第二代高温超导带材研发取得的主要进展。     

Laminated aluminum thin-films as low-cost opaque moisture ultra-barriers for flexible organic electronic devices

Flexible aluminum moisture barrier films are shown to meet ultra-barrier requirements with water vapor transmission rates as low as 1*10⁻⁴ g/m²/day at 38 °C and 90% R.H. These low transmission rates are achieved by lamination of two films that are independently processed on individual substrates. The integration in organic electronic devices like organic solar cells or OLEDs is particularly easy in a single lamination step, since an existing aluminum electrode can be utilized as one half of the moisture barrier. The resulting laminate maintains flexibility of the device and improves the barrier quality by an order of magnitude compared to conventional stacking of two barriers. Organic solar cells with this type of encapsulation are manufactured and aged in controlled climate. They do not exhibit significant extrinsic degradation.     

杀虫剂防护服面料整理工艺及其对吸水与渗透性能的影响

阐述了杀虫剂对人体的危害及使用防护服的必要性,简要论述了防护服面料的两种整理工艺——树脂整理和压榨工艺,并对这类防护服的发展空间进行了展望。     

三维微流道系统技术研究

采用LTCC技术,可以获得替代采用硅或其他技术制作的微功能结构,简化工艺,降低成本.重点研究了内嵌三维(3D)微流道系统LTCC多层基板成型中的关键技术:热压和烧结,并进行工艺优化.利用优化的热压、烧结工艺参数,可制备出完好的3D微流道系统LTCC多层基板;通过实验验证,LTCC内嵌三维微流道系统取得了良好的散热效果.     

梯度结构张量分析法在三维地震资料河道砂体预测中的应用

梯度结构张量分析是近年来引入地震解释领域的一种新的属性分析方法,可用于识别地震数据体中的具有不同纹理特征的沉积地貌单元。在地震剖面上,河道沉积充填模式主要有上超充填、侧向加积、复合充填及杂乱和无反射充填等类型;从图像纹理角度来看,前３种表现为弯曲层状纹理,后２种则为杂乱纹理。以四川盆地北部Ｘ地区下侏罗统河流相储层为例,对三维地震数据体开展梯度结构张量分析,提取反映河道纹理特征的各向异性参数,通过地层切片刻画河道地貌单元的形态和空间展布特征,取得了满意效果。与常规方法提取的相干及几何属性比较,该方法的抗噪性更好,对河道等沉积地貌单元的反映更为灵敏。