Hierarchical composite of biomass derived magnetic carbon framework and phytic acid doped polyanilne with prominent electromagnetic wave absorption capacity

To solve the electromagnetic pollution,herein,a CoFe₂O₄/C/PANI composite was developed by a green route,which was constructed with spinel of metal oxide,graphitized carbon and conductive polymer composites.Benefiting from the designable interfaces and increased dipoles,the microwave dielectric response capability can be boosted significantly and resulted in the enhanced microwave absorbing performance.As revealed by the reflection loss curve,the minimum reflection loss(RLmin) reached-51.81 dB at 12.4 GHz under a matched thickness of 2.57 mm.At 2.5 mm,the effective absorbing band covered 8.88 GHz,suggesting the desirable wideband feature.In our case,the method of utilization of a novel green way to fabricate multiple-component EM absorber can be a promising candidate for high-performance EM absorber.     

信号调理器对动态测试的影响

信号调理器是动态测试系统的重要组成部分，带宽、放大倍数和滤波是衡量其性能的主要指标。动态测试系统的输出信号幅值和相位是表征测试结果的重要参数。本文研究信号调理器性能对动态测试系统输出信号幅值和相位的影响，试验并分析带宽、放大倍数和滤波对输出信号幅值和相位造成的衰减。对提高动态测试结果准确度，优化测试系统动态性能具有重要意义。     

铁路反恐视频监控系统方案探究

本文通过分析反恐视频监控的需求，研究了普通红外线摄像机和激光摄像机的性能、铁路通信传输网通道容量和视频占用的资源量，推荐反恐视频监控方案采用数字激光摄像机。     

超级计算机网络引导技术研究与分析

针对超级计算机系统中网络引导时间开销大的问题，提出网络引导分布算法是影响网络引导性能的主要因素之一，是优化网络引导性能的主要方向的观点。首先，分析了影响大规模网络引导性能的主要因素；其次，结合一种典型超级计算机系统，分析了超节点循环分布算法（SCDA）和插件循环分布算法（BCDA）的网络引导数据流拓扑结构；最后，量化分析了这两种算法对各个网络路径段的压力和可获得的网络性能，发现BCDA性能是SCDA性能的1~20倍。通过理论分析和模型推导发现，在计算节点和引导服务器之间使用更细粒度的映射算法可以在引导部分资源时使用尽量多的引导服务器，减少对局部网络资源的过早竞争，提升网络引导性能。     

The analysis and comparison of two novel kinds of focusing elements as reflectors

In this article, two novel kinds of focusing elements as reflectors are analyzed and compared. One is the grooved Fresnel zone plate reflector with continuous phase‐correcting. The other called subzone paraboloid reflector, has the profile that consists of a series of paraboloids. Their diffraction efficiencies and bandwidths are described. The two elements still preserve the advantages of Fresnel zone plates, namely, low profile, high efficiency, and simple fabrication. Two dual‐reflector antennas using the proposed focusing elements as the main reflectors are simulated and the results show that these antennas have good radiation performances. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:101–108, 2015.     

Throughput-based fair bandwidth allocation in OBS networks

Fair bandwidth allocation (FBA) has been studied in optical burst switching (OBS) networks, with the main idea being to map the max-min fairness in traditional IP networks to the fair-loss probability in OBS networks. This approach has proven to be fair in terms of the bandwidth allocation for differential connections, but the use of the ErlangB formula to calculate the theoretical loss probability has made this approach applicable only to Poisson flows. Furthermore, it is necessary to have a reasonable fairness measure to evaluate FBA models. This article proposes an approach involving throughput-based-FBA, called TFBA, and recommends a new fairness measure that is based on the ratio of the actual throughput to the allocated bandwidth. An analytical model for the performance of the output link with TFBA is also proposed.     

Structural parameter design method for a fast-steering mirror based on a closed-loop bandwidth

When a fast-steering mirror (FSM) system is designed, satisfying the performance requirements before fabrication and assembly is vital. This study proposes a structural parameter design approach for an FSM system based on the quantitative analysis of the required closed-loop bandwidth. First, the open-loop transfer function of the FSM system is derived. In accordance with the transfer function, the notch filter and proportional-integral (PI) feedback controller are designed as a closed-loop controller. The gains of the PI controller are determined by maximizing the closed-loop bandwidth while ensuring the robustness of the system. Then, the two unknown variables of rotational radius and stiffness in the open-loop transfer function are optimized, considering the bandwidth as a constraint condition. Finally, the structural parameters of the stage are determined on the basis of the optimized results of rotational radius and stiffness. Simulations are conducted to verify the theoretical analysis. A prototype of the FSM system is fabricated, and corresponding experimental tests are conducted. Experimental results indicate that the bandwidth of the proposed FSM system is 117.6 Hz, which satisfies the minimum bandwidth requirement of 100 Hz.     

Surface modifications of activated carbon by gamma irradiation

Four commercial activated carbons with different chemical and textural characteristics were modified by gamma irradiation under five different conditions: irradiated in absence of water, in presence of ultrapure water, in ultrapure water at pH = 1.0 and 1000 mg L⁻¹ Cl⁻, in ultrapure water at pH = 7.5 and 1000 mg L⁻¹ Br⁻, and in ultrapure water at pH = 12.5 and 1000 mg L⁻¹ NO₃⁻. Changes in surface chemistry were studied by X-ray photoelectron spectroscopy; pH of point of zero charge, total acidic groups and total basic groups, which were determined by assessment with HCl and NaOH; and textural changes were determined by obtaining the corresponding adsorption isotherms of N₂ and CO₂. Outcomes show that the activated carbon surface chemistry can be modified by gamma irradiation and that the changes depend on the irradiation conditions. Modifications in the sp² hybridization of the surface carbons suggest that the irradiated carbons undergo graphitization. Measurements of structural parameters indicate that the irradiation treatment does not modify the textural properties of the carbons. Finally, studies of pristine and irradiated activated carbons using diffuse reflectance spectroscopy with the Kubelka–Munk function revealed a reduction in band gap energy in the irradiated carbons associated with an increase in sp² hybridization of the carbon atoms.     

浅谈光纤偏振模色散对宽带光网络的影响

主要阐述了光纤偏振模色散PMD产生的机理、原因和测试方法,及光纤偏振模色散PMD指标对宽带光网络的影响和限制作用,光纤质量的好坏决定着宽带光网络PMD的好坏。     

200 MHz带宽基带信号发生器的设计与实现

介绍了基于FPGA的基带信号发生器设计方案,主要叙述了成型滤波以及任意重采样内插比等关键技术。该基带信号发生器不仅实现了标准数字调制格式的基带信号发生,而且通过FPGA内部的并行架构设计,实现了500 MHz的高速数据速率,I/Q带宽达到200 MHz。将其应用于矢量信号发生器中,既实现了PSK、ASK、FSK、MSK、QAM等标准数字调制格式的矢量信号,又实现了400 MHz矢量调制带宽。经过测试,在4 M码元速率的情况下,QPSK和512QAM调制格式的EVM分别达到0.7%和1.0%;400 MHz带宽的矢量调制信号频响小于1 dB。