Influence of SiC microstructure on its corrosion behavior in molten FLiNaK salt

The influence of the microstructure on the corrosion rate of three monolithic SiC samples in FLiNaK salt at 900 °C for 250 h was studied. The SiC samples, labeled as SiC-1, SiC-2, and SiC-3, had corrosion rates of 0.137, 0.020, and 0.043 mg/cm²h, respectively. Compared with grain size and the presence of special grain boundaries (i.e., Σ3), the content of high-angle grain boundaries (HAGBs) appeared to have the strongest influence on the corrosion rate of SiC in FLiNaK salt, since the corrosion rate increased six times as the concentration of high-angle grain boundaries increased from 19 to 32% for SiC-2 and SiC-1, respectively. These results stress the importance of controlling the content of HAGBs during the production process of SiC.     

Attitudinal choice models with applications in human decision making

A new family of attitudinal discrete choice models is proposed by considering the attitudinal character and the weight vector, both of which are specific to a decision maker (DM). Given the attribute values of different alternatives, the proposed models give varying choice probabilities, as per the DM's-specific attitudinal character and the weight vector. It is also shown that the conventional discrete choice models are the special cases of the proposed attitudinal models. The proposed choice models are also generalized through an additional parameter to add to their capabilities. An application on real data is included to demonstrate their usefulness in the real world.     

运行工况对多向扰流强化管CaSO4污垢特性的影响

为更深入并准确研究运行工况条件对多向扰流强化管CaSO_4污垢特性的影响,基于FLUENT软件的UDF功能构建了恒壁温条件下结垢传质过程与温度场的耦合作用关系,进一步采用田口法对运行工况致垢的贡献率进行了模拟比较,分析了贡献率较大的运行工况对污垢特性的影响。结果表明:溶液溶度致垢的贡献率占53.2%,而壁面温度、进口流速和进口温度的贡献率分别为22.2%、19.3%和5.3%;溶液溶度在4.0～2.5 kg/m~3,污垢热阻降低达90.47%,并且随溶度降低其相邻溶度间降低比例基本不变;壁面温度在340.0～315.0 K时,污垢热阻降低了65.22%,在前一阶段相邻温度间降低比例基本上不变,当达到320.0 K后降低明显;流速在1.0～2.5 m/s时,随流速的增加,污垢热阻降低68.65%,且随流速的增加,相邻流速间降低的速度明显减缓。     

基于机器视觉的运煤车车号识别技术研究

在铁路运煤装车过程中为了快速、准确地识别车号,提出一种基于机器视觉的运煤车车号识别技术。将连通区域提取与投影分割法结合,实现车号的粗定位、细分割,并对图像中的断裂字符进行二次分割,构建了基于BP神经网络的分类模型进行车号识别,提升了煤炭装车的效率和精度。     

Characteristics of pigments,modification, and their functionalities

Novel treatments of pigments with inorganic materials have tremendous industrial and commercial prospects. Specific treatment of pigment has a marked effect on its behavior during application. The treatment allows a broad modification of the surface characteristics of pigment particles which leads to improved functionalities. Surface modification of pigments is achieved via coating, polymerization with modifying reagent, treatment with derivatives or polymers, which alter either the optical, conductivity or dispersibility during processing and application. These and many other distinguishing factors that affect the characteristics of pigments such as the class, crystal structure, particle morphology, particle size, hiding power, pigment volume concentration, surface character, and surface treatment have been reviewed. Various organic pigments such as those from fungus and bacteria, and the various families of pigment types such as metallic pigment, light interference, and diffractive pigments which presents decorative quality such as leafing, nonleafing, pearlscent, and Fabry‐Perot effects on substrates have also been reviewed in addition to those from inorganic sources with emphasis on the structure and physiochemical modifications using metal and nonmetal Ions.     

高温、高湿和光照对特殊医用配方食品流变特性的影响

为确定特殊医用配方食品在高温、高湿、光照条件下的流变性变化,以豌豆肽为原料进行影响因素(高温、高湿、光照)试验、加速试验、长期试验,揭示环境因素对特殊医用配方食品黏性、弹性与流变性质的影响。特殊医用配方食品在高温下5 d之后食用安全性降低;在高湿条件下放置10 d左右的医用食品,其食用安全性相对于放置5 d左右的医用食品安全性要高;在光照条件下5 d之后食用安全性降低。由此可见,温度、湿度、光照对特殊医用配方的食用有很大影响。在加速试验及长期试验中,医用食品最佳保质期时间应控制在2~5个月。文章为具有广阔发展前景的特殊医用食品的开发、食用条件及储存条件提供理论数据和指导依据。     

抗氢合金J75中低∑CSL晶界的形成与演化

以铁镍基抗氢合金J75为研究对象,采用单步形变热处理和电子背散射衍射(EBSD)技术,研究了低∑CSL晶界的形成和演化过程。结果表明:采用5%预变形+1000℃退火的单步形变热处理方法,可将J75合金中低∑CSL晶界的比例提升至70%以上,形成具有∑3n取向关系的晶粒团簇;退火过程中,低∑CSL晶界比例的提升主要是由于∑3n界面比例的提升,其中∑3占绝大比例。发现一种∑3再生过程,其机制在于:由于∑3ic迁移能力强,在退火过程中与其他∑3相遇会形成∑9晶界,而∑9与∑3相遇,倾向于发生∑9+∑3→∑3,导致∑3的再生;不连续大角度随机晶界(R)与低∑CSL晶界相遇会形成R/∑晶界,当R/∑晶界为低∑CSL晶界时,则构成较多具有低∑CSL晶界的网络,打断了R晶界的连通性。     

A polyanionic anthraquinone organic cathode for pure small-molecule organic Li-ion batteries

Sodium 9,10-anthraquinone-2,6-disulfonate (Na₂AQ26DS, 130 mAh g⁻¹) with polyanionic character and two O–Na ionic bonds is used as an organic cathode for Li-ion batteries. Na₂AQ26DS exhibits highly impressive cycle stability in ether electrolytes due to its polyanionic character and the effective suppression of solvent-molecule co-intercalation. In half cells (1–3.9 V vs. Li⁺/Li) using 1 M bis(trifluoromethanesulphonyl)imide lithium salt (LiTFSI) in 1,3-dioxolane/dimethoxyethane (DOL/DME), Na₂AQ26DS delivers a highly stable specific capacity of 123 mAh g⁻¹ at 50 mA g⁻¹ for 900 cycles (6-month test) and realizes ∼69 mAh g⁻¹ for 2800 cycles at 500 mA g⁻¹. In the full cells with the reduced state (Li₄TP) of lithium terephthalate (Li₂TP) as the organic anode, the resulting Li₄TP II Na₂AQ26DS organic lithium-ion batteries (OLIBs) can display a highly stable average discharge capacity of 120 mAh g⁻¹_cathode for 100 cycles at 50 mA g⁻¹ and ∼63 mAh g⁻¹_cathode for 1200 cycles at 500 mA g⁻¹ in 0.2–3.3 V.     

Adaptive–interpolative binarization with stroke preservation for restoration of faint characters in degraded documents

A novel technique for binarization with stroke preservation of faint characters in degraded documents is proposed. It works in a multi-scale framework with an adaptive–interpolative thresholding technique. Instead of computing a global threshold value, it computes the local threshold values for a small set of grid points by observing the intensity pattern of the pixels lying in the concerned grid cells. Estimated thresholds are used, in turn, to compute the threshold values of all the remaining pixels using a fast-yet-efficient interpolation procedure. To handle noises in degraded images, this grid-based adaptive thresholding is applied in successively reducing scales to obtain the near-optimal binarization as a set of connected components. After a post-processing meant for stroke preservation with these connected components, we get the final output. Exhaustive experimentation and comparison with other existing methods have been successfully carried out with benchmark datasets and also with our own datasets.     

藏族风情自驾旅游区概念规划——以四川松潘县林坡村为例

四川省甘(孜)—阿(坝)民族地区自然环境优美,民族文化浓郁,旅游资源丰富,近年来吸引了大批自驾游客。甘(孜)—阿(坝)地区松潘县川主寺镇林坡村基于生态和少数民族特色村寨保护的理念,围绕区域"硬资源"(自然景观)和"软资源"(民族特色风情)来构建旅游发展格局,形成了民族特色鲜明、生态可持续发展的体验式自驾旅游区。