Experimental investigation on the heat and water transfer enhancement in a membrane-based air-to-air humidifier at insulation condition

In the present study, a membrane-based air-to-air planar humidifier (MAPH) with baffle-blocked flow channels and a common MAPH are fabricated, tested and compared. These MAPHs are well thermal insulated from their surroundings. Polyoxymethylene (POM) plates with some unique properties such as large tensile and flexural strength, high chemical resistance and high stiffness are used to create channels at dry and humid sides of MAPHs. The obtained findings revealed that the higher heat and water transfer rates and smaller dew point approach temperature (DPAT) in entire tested flow rates occurs in baffle-blocked MAPH. To evaluate the MAPH performance with considering the pressure drop, a dimensionless parameter, performance evaluation criteria (PEC), is introduced. At flow rates less than 1 m³/h, PEC is less than 1, indicating a decline in MAPH performance with considering the pressure drop. In baffle-blocked MAPH using water trap in the inlet of dry side leads to the performance deterioration. Additionally, the increased relative humidity (RH) of humid side inlet causes an increase in DPAT, consequently, the performance deterioration.     

平面并联机构工作空间的三维螺旋扫描CAD求解

针对平面并联机构无奇异位置工作空间求解困难、过程繁琐、计算量大等问题，提出了基于CAD求解平面并联机构工作空间的三维螺旋扫描方法。将[n]自由度平面并联机构分解成[n]条支链进行独立分析，得到每条支链下末端执行器的可达区域，再将所有支链可达区域取交集即为平面并联机构工作空间。应用SolidWorks软件建立平面并联机构模型，进行几何特征处理，通过自动求解器求解，将求解过程图形化，快速得到同轴布局5R机构和平面3-RPR并联机构的无奇异位置工作空间。通过同轴布局5R机构的运动学实验，验证了该求解方法的可行性。     

平面结构冗余并联机构的误差敏感度分析

针对一种含闭环支链的平面结构冗余并联机构进行误差敏感度分析。分析了该机构的逆运动学和正运动学。基于矩阵法建立了机构的误差模型，并通过反解、正解结合的方法对该误差模型进行了验证。基于误差模型，得到了评价机构误差敏感度的指标，绘制了各指标在工作空间内的等值线图。基于误差敏感度指标，定义了低误差敏感性工作空间，绘制了低误差敏感性工作空间在工作空间中的分布图。与平面3-RRR并联机构进行了误差敏感度对比分析。结果表明，该机构的低误差敏感性工作空间占比较大，同时可以通过调节其冗余支链不断扩大低误差敏感性工作空间，使机构在大范围空间中保持低误差敏感性。     

Tertiary‐amine‐free,non‐planar,sulfone‐containing,tetrafunctional epoxy and its application as a high temperature matrix

Non‐amine‐derived tetrafunctional epoxies have several advantages over the amine‐derived N,N,N′,N′‐tetraglycidyl‐4,4′‐diaminodiphenyl methane (TGDDM) in high temperature applications. Although two non‐amine‐derived tetrafunctional epoxies were developed in our laboratory, further improvements in toughness using less loading amount is still desirable. Thus, a tertiary‐amine‐free, non‐planar and triphenylmethane‐containing tetrafunctional epoxy (STFE) with a sulfone spacer was synthesized. When it was mixed with diglycidyl ether of bisphenol A (DGEBA) and cured with 4,4′‐diaminodiphenylsulfone (DDS), both thermal and mechanical performances outperformed TGDDM. Moreover, STFE modified system shows the highest toughness (35.7 kJ m^–2) among three amine‐free and triphenylmethane‐containing epoxies at merely 5 wt% loading. Molecular simulation and thermomechanical analysis results suggest that the improved mechanical properties could be related to the geometry of the molecule and larger free volume. Despite a marginal drop in T_g, the thermal degradation temperature is better than that of TGDDM/DDS. In addition, the moisture resistance of STFE/DGEBA/DDS is much better than that of TGDDM/DDS. Thus, STFE modified DGEBA could be a potential replacement for TGDDM in some high temperature applications. © 2020 Society of Chemical Industry     

Study of equivalent efficiency calibration method for radioactive gas source measured on HPGe detectors

ABSTRACT

In view of the complexity of current detection efficiency calibration of radioactive gas sources, a method using solid planar sources to be equivalent to gas sources was studied. For the 50 mL gas source box, an optimal equivalent scheme was selected by Monte Carlo Simulations. Then, the full-energy-peak efficiency curve of gas sources at the measurement position of 25 cm, with source-to-detector distance of 25 cm, was fitted by measuring solid planar sources with known activity. To verify the accuracy of the efficiency curve, ⁴¹Ar, ¹³³Xe and ⁸⁷Kr gases were produced and determined by length-compensated method. Then, their full-energy-peak efficiencies at 25 cm position away from the detector were directly calibrated. The percentage efficiency deviations between interpolation from the efficiency curve and direct calibration are all less than 2.5%, which proves the accuracy of the equivalent method. This calibration method is a general one and can be also used for some other radioactive sample measurements, such as non-destructive analysis of gaseous fission product samples with a suitable source-to-detector distance.     

一种分级同步重力卸载试验台

卫星天线驱动机构由两个正交的旋转关节组成，为了在发射前测试其性能，提出了一种分级同步重力卸载方法，并根据该卸载方法搭建了气浮试验台。该试验台能够对天线驱动机构的两个正交关节进行重力卸载，同时提供两个关节的转动自由度。试验台采用两层结构的形式，用气浮垫和气浮主轴组合实现重力卸载，提供了驱动机构所需的两个关节的转动自由度。带载测试能够真实反映驱动机构的性能，椐此设计了基于频率和转动惯量约束的模拟负载，并安装在所设计的气浮试验台上。两层结构的形式解决了两轴转动惯量的耦合问题，同时能够达到给定的频率要求。对气浮试验台进行了测试，证明了分级同步重力卸载方法的有效性。     

Effects of hydrogen enhancement on mesoscale burner array flame stability under acoustic perturbations

Partial substitution of hydrocarbon fuel with hydrogen can effectively improve small-scale combustion system stability and performance, potentially opening the way for novel compact power generation and/or propulsion systems in the future. In this study, the effects of hydrogen enhancement between 0% and 40% hydrogen volumetric fractions in methane fuel were experimentally observed in a mesoscale burner array subjected to external acoustic perturbations. The mesoscale burner array utilizes an array of swirl-stabilized burner elements and their interactions with neighboring elements to improve the overall flame stability and simultaneously reduces the combustor length scale. OH1 chemiluminescence and OH planar laser-induced fluorescence (OH-PLIF) were used to image various hydrogen-enriched flames at an equivalence ratio of 0.7, subjected to transverse acoustic perturbations at 320 Hz. Two acoustic modes were imposed by controlling the phase difference between two speakers perturbing the flow. OH1 chemiluminescence images exhibited flame length scale reduction, leading to a denser flame array. Also, flame arrays with higher hydrogen enrichment were found to be more robust against transverse acoustic perturbations, demonstrated by reduced fluctuations in the global heat release rate. OH-PLIF images showed that flames with higher hydrogen enrichment initiated V- to M-shaped flame shape transition even under fuel lean conditions, thereby improving the combustion stability. OH-PLIF images were also used for flame stability analysis through spectral proper orthogonal decomposition (SPOD). The SPOD analysis showed hydrogen enrichment diminished flame fluctuation structures under fuel lean operation.     

固定床煤气炉偏火偏灰的原因分析和措施

偏灰偏火是煤气炉日常操作中的"常见病"。煤气炉出现偏灰偏火的危害很大,处理恢复的难度同样很大。采取主动措施预防是关键。从工艺、设备、操作、煤质等方面分析导致偏火偏灰的原因。     

Efficient and Scalable Kinetic Resolution of Racemic 4‐Formyl[2.2]paracyclophane via Asymmetric Transfer Hydrogenation

Herein we wish to report a new non‐enzymatic kinetic resolution of racemic 4‐formyl[2.2]paracyclophane based on Noyori asymmetric transfer hydrogenations (KR‐ATH). Our approach, which provides an efficient access to enantiopure (R_p)‐ and (S_p)‐4‐formyl[2.2]paracyclophane (>99% ee, 39% and 41% isolated yields, respectively), is operationally simple and can be run on the gram‐scale thus confirming the practical applicability of this method.

     

Planar‐Chiral Cyclopentadienyl‐Ruthenium‐Catalyzed Regio‐ and Enantioselective Asymmetric Allylic Alkylation of Silyl Enolates under Unusually Mild Conditions

We report the asymmetric allylic alkylation of allylic chlorides with silyl enolates as a carbon nucleophile using a planar‐chiral cyclopentadienyl‐ruthenium (Cp′Ru) catalyst. The reaction proceeds under unusually mild conditions to give the desired branched products with complete regioselectivity and high enantioselectivity, and reactive functional groups, such as aldehyde, can be tolerated. In this reaction system, Cp′Ru plays an important role in activating both silyl enolate and allylic chloride.