基准平面垂直断面法在爆破漏斗试验中的应用

系统阐述了基准平面垂直断面法在爆破漏斗试验中测量爆破漏斗体积的基本原理,并将隧道激光断面仪应用于金厂河矿1 750 m水平15^#采场底部切割巷道爆破漏斗试验爆破漏斗体积测量中。通过与传统体重法等计算法所得漏斗体积分析比较,结果表明基于隧道激光断面仪与3D Mine软件分析的基准平面垂直断面法实用性强、操作方便、结果直观可靠,达到试验预期目的。     

天津市近代机场的规划和建设研究

分析近代天津历次近代城市规划中机场布局思想的演进历程，采用比较研究方法剖析天津近代各类机场设计方案的异同及其各自特征，并总结了天津近代机场场面规制及其跑道形制在不同时期的演进规律，还从规划编制体例角度论证了天津近代机场规划及其实例应用。     

高温气冷堆舱室抗商用飞机撞击的耦合数值分析

本文建立了大型商用飞机撞击典型高温气冷堆核电站反应堆舱室的非线性有限元模型，计算中混凝土舱室直接采用工程用钢筋混凝土的损伤塑性本构模型，飞机结构采用Johnson-Cook本构模型。对飞机高速撞击高温气冷堆核电站反应堆舱室非线性撞击过程进行模拟计算，得出正面和侧面撞击条件下的撞击载荷曲线、撞击位移云图、反应堆舱室混凝土破坏情况等结果。评估表明，反应堆舱室结构在撞击条件下的整体损伤微小，可为保护内部关键设备提供重要的屏障功能。     

Wave scattering through an orthotropic thermoelastic slab sandwiched between two isotropic elastic half-spaces

Abstract

Present study deals with the scattering of a plane wave through an orthotropic thermoelastic slab sandwiched between two elastic half-spaces. Unlike the classical theory of thermoelasticity, we have employed non-classical thermoelastic theories (LS-theory and GL-theory) to analyze the scattering of plane waves. The amplitude ratios for different waves have been computed numerically for the considered generalized theories of thermoelasticity. The effect of the slab thickness on the amplitude ratios has been shown graphically. Moreover, the amplitude ratios of different waves (i.e., reflected, transmitted, forward and backward waves) are compared for different values of slab thickness under both the LS-theory and GL-theory.     

Case history on failure of a 67 M tall reinforced soil slope

Construction of this 67 m high RSS was completed in December 2006. After seven years in-service, a tension crack was observed at the top of the slope. In March 2015 this RSS structure catastrophically collapsed. This RSS structure collapsed in a compound failure mode; as the failure plane passed beneath, partially behind, and partially through the reinforced soil mass. The failure plane beneath the RSS was along a shale-claystone interface. The failure surface partially behind the RSS was along sandstone bedrock with water-seeping bedding planes dipping out of the rock mass. The failure surface through the upper portion of the RSS is where the geogrid reinforcement was overwhelmed by stresses originating from underlying deformation. The RSS collapse occurred after 8.3 years in-service as the shear strength along the shale-claystone interface decreased and approached the fully softened strength. The primary causative factors of this failure are: (i) an insufficient subsurface investigation program and interpretation of data for design and detailing; (ii) insufficient specifications and construction plan details for both foundation preparation and rock backcut benching; (iii) insufficient foundation preparation and rock backcut benching during construction; and (iv) adaptations to the design made during construction.     

能源土边界面模型的应力更新算法及算例分析

水合物的存在会显著影响能源土的刚度、峰值强度与剪胀性。针对已有能源土模型的不足，结合边界面模型的建模思想，构建一个新的能源土边界面模型，模型参数较少，能够恰当反映能源土的应力-应变关系。计算能源土变形问题的核心在于正确积分塑性本构方程，应用完全隐式回退Euler算法，建立模型应力及塑性内变量的更新公式，并给出显式的一致性切线模量表达式。基于ABAQUS软件提供的二次开发接口，编写模型的用户材料子程序，应用已有试验数据验证程序正确性。最后应用开发的子程序对能源土的平面应变试验进行模拟，分析水合物饱和度对剪切带倾角与孔隙比的影响。     

The effect of the exposed crystal plane on the antioxidant activity of nanoceria

Previous reports have noted that exposed crystal planes could affect the antioxidant activity of nanocerias, although the synthesized nanocerias used in those studies had different exposed crystal planes, as well as different sizes and morphologies. In order to better understand the effect of the crystal planes on the antioxidant activity of the materials, two types of nanocerias with similar morphology and size distribution but different crystal planes were synthesized using the hydrothermal method (CeO₂–H) and the ultrasonic template method (CeO₂–U). The antioxidant activities of the nanocerias were further explored within different ·OH concentrations in the reaction system. The experimental results showed that there is an obvious difference in the antioxidant activity of the two types of nanocerias in the lower free radical concentration system due to the effects of exposed crystal planes. CeO₂–U, with more active crystal planes (100), had stronger antioxidant activity. However, with the increase in the ·OH concentration in the reaction system, the difference in the antioxidant activity of the two nanocerias decreased. This research will increase our understanding of the antioxidant activity of the exposed crystal planes on nanocerias.     

Optimal asymmetrical back plane biasing for energy efficient digital circuits in 28 nm UTBB FD-SOI

In this work we propose an optimal back plane biasing (OBB) scheme to be used in a UTBB FD SOI technology that minimizes the energy per operation consumption of sub threshold digital CMOS circuits. By using this OBB scheme, simulations show that more than 30% energy savings can be obtained with low threshold voltage (LVT) devices in comparison with classic symmetric back plane biasing (SBB) schemes. Additionally, this OBB scheme allows to adjust the performance of the circuit with very small energy penalties. A very simple and intuitive model, for sub threshold digital CMOS circuits, was developed to justify the benefits obtained by OBB. The results predicted by the model are confirmed with extensive simulation results. We show that the OBB approach can be applied easily to a given circuit just based on the information provided by a logic simulation of the circuit (or even an analysis of its structure) and simple electrical simulations of the pMOS and nMOS transistors. Finally, we show that the variability in the energy consumption is improved by using OBB and suggests that new sizing methodologies must be studied to fully benefit from the wide back plane voltage range available in UTBB FD SOI technology for the design of robust energy efficient digital circuits.     

Formulations and solution algorithms for dynamic assembly routing problem

We study a dynamic version of the assembly routing problem. The assembly lot sizing section deals with decisions concerning the production phase, whereas the routing section organises the collection of raw materials necessary for the production. Traditionally, these two problems are treated separately, and more specifically, in a hierarchical way. We propose three linear programming models: a non-vehicle index model, a two-commodity flow formulation and a logic-based benders decomposition. We develop aggregated rounded capacity constraints for non-vehicle index model and separated them dynamically during the Branch & Cut procedure. Logic-based benders decomposition algorithm solves the Dynamic Assembly Routing Problem iteratively and obtains a feasible solution at each iteration. The numerical tests show that, the two first models are particularly effective at finding the optimal solutions in a reasonable amount of time on instances with up to 50 components and 3 periods.     

基于线特征及迭代最近点算法的地基建筑物点云自动配准方法

为克服迭代最近点(ICP)算法易陷入局部最优的缺陷，提出一种基于线特征及ICP算法的地基建筑物点云自动配准方法。首先，基于法向一致性进行建筑物点云平面分割；接着，采用alpha-shape算法进行点簇轮廓线提取，并拆分和拟合处理得到特征线段；然后，以线对作为配准基元，以线对夹角和距离作为相似性测度进行同名特征匹配，实现建筑物点云的粗配准；最后，以粗配准结果为初值，进一步采用ICP算法完成点云精确配准。利用两组部分重叠的建筑物点云进行配准实验，实验结果表明，采用由粗到精的配准方法能有效改善ICP算法对初值依赖的问题，实现具有部分重叠的建筑物点云的有效配准。