Benchmark experiment of large-angle scattering reaction cross section of iron at 14 MeV using two shadow bars – Comparison of experimental results with ENDF/B-VIII –

ABSTRACT

It is important to perform neutron transport simulations with accurate nuclear data in the neutronics design of a fusion reactor. However, absolute values of large-angle scattering cross sections vary among nuclear data libraries even for well-examined nuclide of iron. Benchmark experiments focusing on large-angle scattering cross sections were thus performed to confirm the correctness of nuclear data libraries. The series benchmark experiments were performed at a DT neutron source facility, OKTAVIAN of Osaka University, Japan, by the unique experimental system established by the authors’ group, which can extract only the contribution of large-angle scattering reactions. This system consists of two shadow bars, target plate (iron), and neutron detector (niobium). Two types of shadow bars were used and four irradiations were conducted for one experiment, so that contribution of room-return neutrons was effectively removed and only large-angle scattering neutrons were extracted from the measured four Nb reaction rates. The obtained experimental results were compared with calculations for five nuclear data libraries including JENDL-4.0, JEFF.-3.3, FENDL-3.1, ENDF/B- VII, and recently released ENDF/B-VIII. It was found from the comparison that ENDF/B-VIII showed the best result, though ENDF/B-VII showed overestimation and others are in large underestimation at 14 MeV.     

海月构造带东三段滩坝砂分布及成藏主控因素分析

辽河滩海地区海月构造带东三段沉积期,三角洲前缘砂体受湖岸流和波浪的改造,形成了一系列滩坝砂沉积,细分为滩砂和坝砂,水动力强则形成坝砂,水动力弱则形成滩砂;滩坝砂平行于湖岸线呈带状分布,易于形成岩性圈闭。滩坝砂受砂体发育规模、储层物性、断裂输导体系及封堵性等多种因素控制,在滩坝砂较为发育的东三下段,靠近海南断层、盖州滩断层且封堵条件优越的滩坝砂最易于成藏。     

二里河铅锌矿井下支护方案综述

为总结出一套适合矿山实际的支护方案，二里河铅锌矿在矿山生产的20余年里，引进了多种支护工艺进行试验。矿山根据井巷、硐室所处工程环境，确定了锚杆、钢筋、钢架、混凝土进行单一或组合支护的方案，特别是千枚岩内12.4 m跨度的提升机硐室支护方式与参数，对矿山软弱岩层大跨度硐室工程支护具有参考价值。采场则按照急倾斜、缓倾斜矿体上盘千枚岩支护为例，分别列举了锚杆、锚杆+锚索支护的工程方案。采场联络巷、矿房行人通道等区域利用支柱+横梁临时支护。不但提高了采场作业安全性，也使采矿损失率降低5%，贫化率降低7%。     

超细全尾砂充填体动态力学特性研究

充填体作为人工矿柱,为矿房回采创造了条件,但经常受到爆破等冲击荷载作用。充填体的动态力学特性直接关系到充填采矿法的安全高效实施。通过单轴压缩试验和分离式霍布金森压杆(Split Hobkinson Pressure Bar,SHPB)试验技术,进行了不同充填配比参数的超细全尾砂充填体压缩试验,得到其静载和动载下的应力-应变曲线和能量变化曲线,并分析了其破坏模式。研究表明:充填体质量浓度越高,灰砂比越大,峰值应力和峰值应变随之增大,呈现正相关性,其中灰砂比和质量浓度对应力的影响相对一致,但应变受质量浓度影响更大;当冲击荷载由0.3 MPa增大至0.6 MPa时,充填体的破坏形式由保持完整形态变为产生裂纹,直至被压碎,转变为完全失稳破坏状态;充填体能量吸收随着冲击荷载的增加而逐渐递增,但质量浓度和灰砂比增大时,充填体比能量和能量吸收率反而下降,其中灰砂比是影响充填体吸能效率的主要因素,质量浓度次之。     

Compressive properties of pristine and SiC-Te-added MgB2 powders,green compacts and spark-plasma-sintered bulks

Pristine and (SiC+Te)-added MgB₂ powders, green and spark plasma sintered (SPS) compacts were investigated from the viewpoint of quasi-static and dynamic (Split-Hopkinson Pressure Bar, SHPB) compressive mechanical properties The amount of the additive (SiC+Te) was selected to be the optimum one for maximization of the superconducting functional parameters. Pristine and added MgB₂ show very similar compressive parameters (tan δ, fracture strength, Vickers hardness, others) and fragment size in the SHPB test. However, for the bulk SPSed samples the ratio of intergranular to transgranular fracturing changes, the first one being stronger in the added sample. This is reflected in the quasi-static K_IC that is higher for the added sample. Despite this result, sintered samples are brittle and have roughly similar fragmentation behavior as for brittle engineering ceramics. In the fragmentation process, the composite nature of our samples should be considered with a special focus on MgB₂ blocks (colonies) that show the major contribution to fracturing. The Glenn-Chudnovsky model of fracturing under dynamic load provides the closest values to our experimental fragment size data.     

Novel insights on the impact of top water on Steam‐Assisted Gravity Drainage in a point bar reservoir

As efforts are made to efficiently exploit and recover bitumen resources in Canada, increasingly more complex reservoirs in the Athabasca area continue to challenge the application of Steam‐Assisted Gravity Drainage (SAGD) technology. Several studies have been done to investigate the impact of heterogeneities/complexities such as shale barriers, lean zones, and top and bottom water on the performance of the SAGD process. However, the literature is deficient for point bar deposits with top water zones, a common occurrence in oil sands systems. This study, by using thermal reservoir simulation, examines SAGD performance in a point bar deposit reservoir where an overlying top water and an inclined heterolithic strata (IHS) is present. The results show that where the top water is unconfined and steam injection pressure is higher than that of the top water zone, there is a loss of thermal energy, but the top water does not impact steam chamber development. At steam injection pressure lower than that of the top water zone, top water continuously drains into the reservoir and constrains the size of the chamber. However, the IHS zone helps to delay drainage of the top water into the chamber when steam is injected at underbalanced conditions. Finally, under proper steam injection pressure conditions, top water production can be considerably delayed.     

防振条约束失效对蒸汽发生器传热管面内流弹失稳的影响研究

根据防振条布置以及面内支承连续失效个数，将防振条面内约束失效分析划分为多种工况，分析了不同工况下面内约束失效对传热管面内模态的影响，采用各位置阻尼在振型函数上进行加权平均的方法计算了各阶模态的阻尼比，进而研究了防振条面内不同约束对传热管面内流弹失稳的影响。分析结果表明，随着面内支承连续失效位置的增多，弯管段面内首阶模态频率不断降低，出现在弯管段的振型越加明显；弯管段面内首阶模态不一定是最大流弹失稳比值出现的模态，最大流弹失稳比值出现模态的振型几乎都出现在弯管段；随着面内支承连续失效位置的增多，面内流弹失稳比值不断增大，当连续3个及以上防振条面内约束失效时，将出现流弹失稳现象。     

抽水蓄能发电机定子线棒绝缘击穿故障分析

通过对抽水蓄能机组定子绝缘击穿故障线棒进行解剖分析和理化性能测试，研究线棒受损的外力来源，结合机组安装期线棒下线情况及端部成型工艺，应用有限元结构分析程序ANSYS仿真计算线棒端部校形受力情况，提出线棒校形会对出槽口处的绝缘产生受力集中点，击穿面绝缘内部产生裂纹并逐渐由内向外劣化，最终导致线棒绝缘击穿事件的发生。