High-Pressure Reverse Osmosis for Industrial Water Recycling: Permeate-Sided Pressure Drop as Performance-Limiting Factor

In the chemical industry large amounts of saline wastewater occur. Its disposal into rivers is a considerable burden to the ecosystem. To strive for a circular economy and enable a viable raw material recycling, energy-efficient concentration processes are requisite. High-pressure reverse osmosis meets this criterion, but its industrial application demands suitable membrane elements that withstand the exceptional operation conditions and provide sufficient performance. Hence, new requirements regarding the design of spiral-wound elements arise. To identify those, specific performance-limiting effects need a better understanding.     

Batch Tests for Optimisation of Solvent Composition and Process Flexibility of the CHALMEX FS-13 Process

ABSTRACT

Studies have been performed with the purpose of determining the optimal solvent composition of a Chalmers grouped actinide extraction (CHALMEX) solvent for the selective co-extraction of transuranic elements in a novel Grouped ActiNide EXtraction (GANEX) process. The solvent is composed of 6,6’-bis(5,5,8,8-tetramethyl-5,6,7,8-tetrahydro-benzo-[1,2,4]-triazin-3-yl)-[2,2’]-bipyridine (CyMe₄-BTBP) and tri-n-butyl phosphate (TBP) in phenyl trifluoromethyl sulfone (FS-13). The performance of the system has been shown to significantly depend on the ratios of the two extracting agents and the diluent to one another. Furthermore, the performance of the determined optimal solvent (10 mM CyMe₄-BTBP in 30% v/v TBP and 70% v/v FS-13) on various simulated PUREX raffinate solutions was tested. It was found that the solvent extracts all transuranic elements with high efficiency and good selectivity with regard to most other elements (fission products/activation products) present in the simulated PUREX raffinate solutions. Moreover, the solvent was found to extract a significant amount of acid. Palladium, silver, and cadmium were co-extracted along with the TRU-radionuclides, which has also been observed in other similar CHALMEX systems. The extraction of plutonium and uranium was preserved for all tested simulated PUREX raffinate solutions compared to experiments using trace amounts.     

Deconvoluting Energy Transport Mechanisms in Metal Halide Perovskites Using CsPbBr3 Nanowires as a Model System

Understanding energy transport in metal halide perovskites is essential to effectively guide further optimization of materials and device designs. However, difficulties to disentangle charge carrier diffusion, photon recycling, and photon transport have led to contradicting reports and uncertainty regarding which mechanism dominates. In this study, monocrystalline CsPbBr₃ nanowires serve as 1D model systems to help unravel the respective contribution of energy transport processes in metal-halide perovskites. Spatially, temporally, and spectrally resolved photoluminescence (PL) microscopy reveals characteristic signatures of each transport mechanism from which a robust model describing the PL signal accounting for carrier diffusion, photon propagation, and photon recycling is developed. For the investigated CsPbBr₃ nanowires, an ambipolar carrier mobility of μ = 35 cm² V⁻¹ s⁻¹ is determined, and is found that charge carrier diffusion dominates the energy transport process over photon recycling. Moreover, the general applicability of the developed model is demonstrated on different perovskite compounds by applying it to data provided in previous related reports, from which clarity is gained as to why conflicting reports exist. These findings, therefore, serve as a useful tool to assist future studies aimed at characterizing energy transport mechanisms in semiconductor nanowires using PL.     

Reusable Polyacrylonitrile-Sulfur Extractor of Heavy Metal Ions from Wastewater

Mercury, lead, and cadmium are among the most toxic and carcinogenic heavy metal ions (HMIs), posing serious threats to the sustainability of aquatic ecosystems and public health. There is an urgent need to remove these ions from water by a cheap but green process. Traditional methods have insufficient removal efficiency and reusability. Structurally robust, large surface-area adsorbents functionalized with high-selectivity affinity to HMIs are attractive filter materials. Here, an adsorbent prepared by vulcanization of polyacrylonitrile (PAN), a nitrogen-rich polymer, is reported, giving rise to PAN-S nanoparticles with cyclic π-conjugated backbone and electronic conductivity. PAN-S can be coated on ultra-robust melamine (ML) foam by simple dipping and drying. In agreement with hard/soft acid/base theory, N- and S-containing soft Lewis bases have strong binding to Hg²⁺, Pb²⁺, Cu²⁺, and Cd²⁺, with extraordinary capture efficiency and performance stability. Furthermore, the used filters, when collected and electrochemically biased in a recycling bath, can release the HMIs into the bath and electrodeposit on the counter-electrode as metallic Hg⁰, Pb⁰, Cu⁰, and Cd⁰, and the PAN-S@ML filter can then be reused at least 6 times as new. The electronically conductive PAN-S@ML filter can be fabricated cheaply and holds promise for scale-up applications.     

油脂脱色废白土二次煅烧再生工艺的研究

采用二次煅烧对油脂脱色废白土进行再生,对煅烧温度及煅烧时间进行了探索研究。通过实验确定最佳脱色废白土再生条件为520℃两次煅烧0.5 h,该条件下所得再生白土脱色率可达79.79%,接近于新活性白土的脱色效果(82.18%),实现了循环利用、节约成本、节能降耗、环保安全的目标。     

典型废玻璃回收厂区空气颗粒物及噪声分布特征研究

以某典型废玻璃回收厂区作为研究对象, 监测和分析了车间及厂区内部的噪声强度、空气颗粒物(PM_2.5、PM₁₀) 浓度等环境指标, 点位布设涵盖了车间入口、人工分拣、物料筛分、破碎、干法清洗等关键工艺环节; 其次, 解析了空气颗粒物的组分及形貌特征, 并对其在厂区及车间内部的时空分布特征进行了研究; 此外, 利用噪声控制模型模拟并分析了隔声罩对噪声的控制作用。结果表明, 生产车间中工作态的空气颗粒物浓度显著高于非工作态, 其中干法清洗区浓度最高, 其PM_2.5 浓度为3.725 mg/m³, PM₁₀浓度为4.055 mg/m³; 噪声监测结果显示生产车间内噪声强度较高, 达到99.5 dB, 而引入隔声罩后噪声强度可降至67 dB, 结果表明, 隔声罩可有效控制频率为125~1 000 Hz 的噪声。该研究可为废玻璃的绿色、高效回收处置提供理论基础和实践经验。     

The use of recycled low-density polyethylene films from protective prepreg for the development of nanocomposites with bentonite clay

Prepreg is a pre-impregnated composite fiber where a thermoset polymer matrix material is present. Before being used, these materials are kept at low temperatures and have a low-density polyethylene (LDPE) film for your protection. The increase in the use of structural composites based on prepregs causes an increase in the amount of protective LDPE film. This material is usually discarded or incinerated and can cause great damage to the environment. Thus, the present work aimed to study the feasibility of recycling up to 100% of protective LDPE (rLDPE) to develop blends-based nanocomposites with rLDPE/virgin LDPE (60/40, 70/30, 80/20, 90/10 and 100/0) with the addition of 5 wt% of compatibilizer agent (maleic anhydride grafted LDPE, LDPE-g-MA), and 1 wt% of bentonite (BNT) using a co-rotational twin-screw extruder, followed by hot pressing in a hydropneumatic press and die-cutting. Water absorption test, thermal aging resistance, morphological characterization by scanning electron microscopy, mechanical properties by Izod impact strength and tensile tests, and differential scanning calorimetry were performed. By the results, it was possible to verify the viability of 100% of the recycling of rLDPE. The results showed a good distribution of 1 wt% of BNT in the matrix, better mechanical properties when compared with virgin LDPE. Furthermore, the thermal properties, water absorption test, and thermal aging resistance showed no statistical differences between the samples. These results confirm the effectiveness and the environmental gain in the use of the recycled material.     

Synthesis and characterization of natural rubber-based telechelic oligomers via olefin metathesis

Metathesis degradation and functionalization of natural rubber (NR) were conducted with 1-hexene, 1-octene, 1-decene, 1-dodecene, trans-stilbene, and 4,4′-dibromo-trans-stilbene as chain transfer agents (CTAs) in presence of Grubbs 2nd generation catalyst to generate NR-based telechelic oligomers that had been a long-lasting challenge due to the structure and compositions of NR with various impurities. Orthogonal experiments were applied and the effects of the CTA type, CTA concentration, catalyst concentration, reaction time, and reaction temperature on the formation of telechelic oligomers were studied, indicating that the catalyst concentration was the major factor influencing the number average molecular weights (M_n) and polymer dispersity index (PDI) of telechelic oligomers. The structures of the oligomers were characterized using ¹H NMR, ¹³C NMR, and MALDI-TOF-MS, which confirmed the formation of the designed terminal groups. The results showed that well-defined telechelic oligomers with a M_n of a few thousand and a PDI around 1.6 were obtained, with potential applications in binder, lubricant and many other fields.     

四川省桶装饮用水回收桶中铜绿假单胞菌的污染状况调查

目的 研究桶装饮用水回收桶中铜绿假单胞菌的污染情况以及清洗消毒工序消除铜绿假单胞菌的有效性。方法 参考GB 8538-2016《食品安全国家标准 饮用天然矿泉水检验方法》中铜绿假单胞菌滤膜过滤法, 对大中小型(各2家)桶装饮用水生产企业的清洗消毒工序前后的回收桶进行检测, 并对检出的微生物进行鉴定。 结果 大中小型生产企业的回收桶清洗消毒前的铜绿假单胞菌的检出率依次为75%、80%、70% (平均75%), 清洗消毒后的检出率依次为0、20%、45% (平均22%), 同时检出其他假单胞菌及不动杆菌。结论 桶装饮用水回收桶中铜绿假单胞菌的污染普遍比较严重, 中小型企业的现有清洗消毒工序不足以清除铜绿假单胞菌。