汽车计算平台工程国外相关标准概述

结合我国汽车计算平台工程,分析了国外相关的标准现状和基本框架,并为今后工作的开展提出了建议.     

Study of liquid injection impact on the performance of new refrigerant mixtures

In this paper, the test results of liquid injection impact on the performance of new alternative refrigerant mixtures such as: R-410A, R-507, R-407C and R-404A are discussed, analysed and presented. The test results were obtained using an air-source heat pump set-up with enhanced surface tubing under various liquid injection ratios. Performance tests were conducted according to the ARI/ASHRAE standards. The performance data demonstrated that as liquid injection ratio increases, compressor head pressure and discharge temperature decrease. This has a positive effect in protecting the compressor. The effect of liquid injection on mixture behaviour varies from one mixture to another depending upon the mixture's composition. Furthermore, liquid injection appears to have a significant influence on R-410A behaviour compared to the other mixtures in question. Copyright © 2002 John Wiley & Sons, Ltd.     

Indoor Air Quality: Exploring Policy Options to Reduce Human Exposures

Deciding between the different policy approaches available for reducing human exposures to indoor pollutants is an exceptionally complex task. These options can range from waiting until more definitive information is available to enacting regulatory standards, with many variations in between. This paper presents some of the factors policy-makers must consider in establishing indoor air quality policies, and the role researchers should play in ensuring that indoor air policies are based on the best available scientific information.     

Smithsonian Microbeam Standards

This is a short history of the Smithsonian Microbeam Standards; their sources, selection, preparation, and analyses. Fifty-eight minerals, natural glasses, and synthetic samples have been characterized in the past 25 years. During that time, over 750 requests were received for approximately 11 000 individual samples. These reference samples are referred to as the Smithsonian Microbeam Standards.     

"On the question of professional standards for computer-based test interpretation": Response to Kramer on Matarazzo.

Responds to the comments by J. J. Kramer (see record 1990-58925-001) on the current author's original article (see record 1986-19878-001), in which Matarazzo contends that computerized clinical psychological test interpretations offer considerable potential for improving the work of health service providers. However, cost additions associated with this technology have increased the probabilities that legislative, judicial, and administrative restrictions and sanctions will be imposed. Here, Matarazzo notes that he finds nothing in Kramer's comments that is inconsistent with the opinions that Matarazzo himself offered. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

关于差阻式仪器的几个技术问题

本文对差阻式仪器的几个重要问题,如差阻式仪器的国家标准、监测数据的质量控制、长期埋设仪器的现场鉴定、仪器测值异常的分析处理等进行了讨论,并提出了自己的意见,供有关科研人员进一步研究和参考.     

System for Sewing Machine Industry Standard Innovation——Constructive Research for a Technical Standards System for Sewing Machines

Constructive research of a market-oriented industry's system of technical standardization by redefining those technical standards is the basis of innovation. Through considering and implementing innovation of the industry's standards,rapid development and standardization of the industry can be achieved.     

The role of the American Board of Professional Psychology in professional mobility.

This article describes the role of certification by the American Board of Professional Psychology (ABPP) in easing the process by which psychologists move beyond their original jurisdictional boundaries to practice psychology. Meeting the requirements for licensure or certification in the various jurisdictions can be a difficult task because these requirements vary considerably from jurisdiction to jurisdiction. Other mechanisms that are available to facilitate this process include the Certificate of Professional Qualification in Psychology issued by the Association of State and Provincial Psychology Boards and certification by the National Register of Health Service Providers in Psychology. The ABPP certificate/diploma has been regarded by many state psychological associations and state boards of psychology as an appropriate way in which to recognize psychologists who are eligible for licensure/certification in a jurisdiction because of the examination requirements for board certification. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Stability of Standard Electrolytic Conductivity Solutions in Glass Containers

The stability of solutions having an electrolytic conductivity, κ, of 5 μS/cm to 100 000 μS/cm packaged in glass screw-cap bottles, glass serum bottles, and glass ampoules was monitored for 1 year to 2 years. The conductivity was determined by measuring the ac resistance of the solution. Mass loss was also monitored for solutions packaged in bottles. The solutions were prepared using KCl in water (κ ≥100 μS/cm) or KCl in 30 % (by mass) n-propanol 70 % (by mass) water (κ ≤ 15 μS/cm). The conductivity changes were compared by packaging type and by nominal κ. The main causes of the κ changes are evaporation (screw-cap bottles) and leaching (screw-cap bottles, serum bottles, and ampoules). Evaporation is determined from mass loss data; leaching occurs from the glass container with no change in mass. The choice of optimal packaging, which depends on the conductivity level, is the packaging in which κ changes the least with time. Ampoules are the most suitable packaging for standards having nominal κ values of 500 μS/cm to 100 000 μS/cm. Screw-cap bottles are most suitable for standards having a nominal κ of 5 μS/cm to 100 μS/cm.     

数字电视产品认证推动标准贯彻实施

简要介绍了数字电视清晰度和机卡分离两项产品认证的进展情况，以及认证工作开展的背景、依据和模式，供有关人员在实施和贯彻标准中参考。