超宽带大功率合成器设计北大核心CSCD

在80 MHz~1 GHz频段,单个功率管输出功率能达到100 W以上,为研制输出功率400 W的功率放大器,文中设计了四路功率合成器。该合成器需要实现功率容量大、工作频带宽、体积小的设计目标。在功率容量方面,文中采用悬置带状线结构,其功率容量远远大于微带线结构;在工作频带方面,采用切比雪夫九节阻抗变换器,将工作带宽拓宽为80 MHz~1 GHz;在体积方面,文中合成器的功率合成部分采用Y型节级联实现四路功率合成,阻抗变换部分采用切比雪夫阻抗变换器进行阻抗变换,该结构相较于磁环巴伦功率合成器,不但具有损耗小、平坦度高的优点,而且通过将阻抗变换器设计成曲折的形状,进一步缩小了合成器体积。仿真与实测结果显示该合成器在80 MHz~1 GHz范围内还具有较高的平坦度,合成效率可达90%以上。     

Liquid Marble Patchwork on Super-Repellent Surface

Liquid marble (LM) is a droplet that is wrapped by hydrophobic solid particles, which behave as a non-wetting soft solid. Based on these properties, LM can be applied in fluidics and soft device applications. A wide variety of functional particles have been synthesized to form functional LMs. However, the formation of multifunctional LMs by integrating several types of functional particles is challenging. Here, a general strategy for the flexible patterning of functional particles on droplet surfaces in a patchwork-like design is reported. It is shown that LMs can switch their macroscopic behavior between a stable and active state on super-repellent surfaces in situ by jamming/unjamming the surface particles. Active LMs hydrostatically coalesce to form a self-sorted particle pattern on the droplet surface. With the support of LM handling robotics, on-demand cyclic activation–manipulation–coalescence–stabilization protocols by LMs with different sizes and particle types result in the reliable design of multi-faced LMs. Based on this concept, a single bi-functional LM is designed from two mono-functional LMs as an advanced droplet carrier.     

Stiffness improvement of swirl gripper based on gap height and force estimation

The swirl gripper is an electrically activated noncontact handling device that uses swirling airflow to generate a lifting force. This force can be used to pick up a workpiece placed underneath the swirl gripper without any contact. It is applicable, for example, on a semiconductor wafer production line, where contact must be avoided during the handling and moving of a workpiece to minimize damage. When a workpiece levitates underneath a swirl gripper, the gap height between them is critical for safe handling. Therefore, in this study, we develop a theoretical model of the swirl gripper, based on which a method to estimate the levitation gap height by detecting pressure at two points is proposed. Experiments indicate that the estimated gap height can track changes in actual gap height accurately in real time, when the gap height is relatively small and the inertia of airflow in the gap is negligible. In addition, the force between the gripper and workpiece can also be estimated using the detected pressure. As a result, a desired relationship between the force and gap height can be achieved by adjusting the rotating speed of the fan according to the real-time estimated force and gap height using a microcontroller. The control system was experimentally verified using a desired linear relationship. Because the stiffness of the force decreases with increasing gap height for a constant gripper fan rotating speed, the linear relationship between the force and gap height, which means a constant stiffness, is expected to enhance handling stability of workpieces.     

Survey of domestic food purchases and related home handling practices in the Abruzzo region (central Italy): Data collection and analysis through a language-independent classification system

A telephone survey was carried out on 13,486 randomly selected households located in the Abruzzo region (central Italy). Three questionnaires were specifically designed in relation to three different groups of foods (Meat and meat products, Fishery products, Fruit and vegetables). Questions were mainly focused on the amount and number of purchases, type of retailer, and home food handling practices with respect to the week prior to the interview. Data were classified according to a multilingual thesaurus system (LanguaL). Results allowed to estimate domestic purchases (in kg) per capita for different food categories. The category “Red meat/Cattle” accounted for a large part of purchases in the “meat and meat products” group (10.9 kg per capita/year; 32.2% of purchases in the group) while the category “Fish or related organism/Fish” was the most purchased in the “fishery products” group (6.9 kg per capita/year; 63.3%). The aggregation of more detailed characteristics enabled the identification of popular categories of foods, such as “Red meat/Cattle/Divided into pieces” (25% of the “meat and meat products” group). Significant differences (p < 0.05) were found between the four different provinces (L'Aquila, Chieti, Pescara and Teramo) with respect to “Poultry/Chicken” and “Red meat/Cattle” categories. Householders were also asked about post-purchase food handling practices that might be hazardous to food safety. More than 20% of those surveyed stated that they thawed frozen meat at room temperature. The degree of doneness after cooking of different food categories was generally high: over 90% of products purchased in the majority of meat and fish categories were properly cooked. However a noticeable proportion of householders (about 15%) reported medium or rare cooking of “Red meat/Cattle” and “Red meat/Swine”. Differences (p < 0.05) were also found between consumers of different ages, with people over 65 years old being more prone to freeze meat and cook it thoroughly.The survey was carried out in a specific geographic area and on a statistically significant sample of households, thus allowing a collection of data on domestic habits relating to food purchases and home food handling practices. This information should be included in the framework of quantitative microbial risk assessment (QMRA) models as a measure of the actual exposure of consumers to pathogenic microorganism. The LanguaL system also proved to be a practical language-independent method useful not only to identify and describe food items but also to classify them according to specific food safety characteristics.     

磁悬浮控制力矩陀螺高速转子的高精度位置控制

在受到陀螺效应、动框架效应等影响后产生的磁力非线性问题是磁悬浮控制力矩陀螺(MSCMG)高速转子位置精度下降的主要因素。为解决以上问题,提高转子位置精度,本文分析了转子所受磁力的特性,建立了转子系统非线性动力学模型,提出了神经网络滑模控制方法。设计滑模控制律,采用径向基函数神经网络逼近控制律中的非线性模型,自适应算法根据误差在线调整神经网络的权值,同时可以保证整个系统的稳定性。仿真和实验结果表明,所提出方法的转子位置精度达到99%,稳态误差为0.000 2 mm。神经网络滑模控制可以实现MSCMG转子系统的高精度位置控制。     

黑龙江荒沟抽水蓄能电站主变压器运输方案论证与研究

抽水蓄能电站一般地处偏远山区,大件运输较为困难,且为节约投资,地下主变压器洞室尺寸及运输通道一般较小,因此主变压器运输较为复杂和困难.针对荒沟抽水蓄能电站主变压器洞及主变压器搬运通道已经完成开挖支护的基础上,取消永久搬运轨道,优化主变压器运输,结合国内大中型主变压器厂家运输方案,论证和研究荒沟抽水蓄能电站取消搬运轨道的合理性与可行性.     

Weighted Superposition Attraction (WSA): A swarm intelligence algorithm for optimization problems – Part 2: Constrained optimization

This paper is the second one of the two papers entitled “Weighted Superposition Attraction (WSA) Algorithm”, which is about the performance evaluation of the WSA algorithm in solving the constrained global optimization problems. For this purpose, the well-known mechanical design optimization problems, design of a tension/compression coil spring, design of a pressure vessel, design of a welded beam and design of a speed reducer, are selected as test problems. Since all these problems were formulated as constrained global optimization problems, WSA algorithm requires a constraint handling method for tackling them. For this purpose we have selected 6 formerly developed constraint handling methods for adapting into WSA algorithm and analyze the effect of the used constraint handling method on the performance of the WSA algorithm. In other words, we have the aim of producing concluding remarks over the performance and robustness of the WSA algorithm through a set of computational study in solving the constrained global optimization problems. Computational study indicates the robustness and the effectiveness of the WSA in terms of obtained results, reached level of convergence and the capability of coping with the problems of premature convergence, trapping in a local optima and stagnation.     

软件功能安全验证活动的应用

软件功能安全验证活动对提高安全关键系统的安全性具有重要作用,它贯穿于软件安全生命周期的各个阶段。通过对各阶段输出文档的审查和分析,可尽早发现软件问题,降低软件修复成本。完整的问题闭环处理流程可有效解决软件验证活动中发现的问题,给出各方均满意的处理结果。     

基于高分一号遥感卫星的渤海湾悬浮泥沙时空分布反演

悬浮泥沙是评价II类水体水质的重要参数之一,近海岸水域悬浮泥沙对重金属、营养盐等具有一定的吸附作用,悬浮泥沙的分布特征在一定程度上反映着污染物的迁移和循环,因此研究悬浮泥沙对渤海湾建设和环境保护具有重要意义。为探究渤海湾水域悬浮泥沙浓度 和分布的变化特征,利用高分一号多光谱卫星影像,通过采用波段组合的方式对悬浮泥沙含量指数反演提取,反演得到2019年9个月的渤海湾悬浮泥沙指数,分析发现渤海湾悬浮泥沙含量在冬季受季风影响较高,春季和夏季的时候渤海湾高浓度悬浮泥沙向近岸收缩,秋季 悬浮泥沙分布格局有正在向冬季过渡的趋势,本文研究可为渤海湾的生态环境保护和工业开发提供重要的科学依据和参考价值。     

基于重要度排序的配电自动化终端优化布局方法

针对配电自动化终端优化布局问题，提出了一种基于重要度排序的终端优化布局方法。首先以等年值综合费用为目标函数，供电可靠性和投入产出比为双重约束建立了配电自动化终端优化布局模型。然后通过分析配电自动化终端对供电可靠性提升的影响，给出各个节点的“二遥”及“三遥”终端安装重要度定义及计算公式。最后采用枚举法确定最优终端安装数量，基于节点终端安装重要度排序确定终端的最优安装位置。该方法考虑了已布局节点对剩余节点终端安装重要度的影响，能够在降低计算量的同时兼顾布局合理性。运用所提方法RBTS-BUS2系统及扩充模型进行终端优化布局并与智能优化算法的布局结果进行对比，验证了本文方法的有效性及优越性。