Presentation attack detection based on two-stream vision transformers with self-attention fusion

Aiming at the performance degradation of the existing presentation attack detection methods due to the illumination variation, a two-stream vision transformers framework (TSViT) based on transfer learning in two complementary spaces is proposed in this paper. The face images of RGB color space and multi-scale retinex with color restoration (MSRCR) space are fed to TSViT to learn the distinguishing features of presentation attack detection. To effectively fuse features from two sources (RGB color space images and MSRCR images), a feature fusion method based on self-attention is built, which can effectively capture the complementarity of two features. Experiments and analysis on Oulu-NPU, CASIA-MFSD, and Replay-Attack databases show that it outperforms most existing methods in intra-database testing and achieves good generalization performance in cross-database testing.     

Establishment of a color tolerance for yarn-dyed fabrics from different color-depth yarns

Yarn-dyed fabric is often woven from warp and weft yarns in the same color depth to ensure a uniform color appearance. The difference in color depth between warp and weft tends to result in the uneven color of the yarn-dyed fabric. This article aims to establish a color tolerance for yarn-dyed fabric that can be woven with a qualified color appearance but from the warp and weft yarns in different color depths. A total of 27 yarn-dyed fabric samples in three color series (red, yellow, and blue) were evaluated by using the yarn-dyed fabric from warp and weft yarns in the same color depth of 2% (on weight of fabric, owf) as the standard. Visual assessment and instrumental measurement of color were carried out to establish the color tolerance ellipse that was defined as CMC (Color Measurement Committee) color differences (2:1) of no more than 1.00. It was found that the color strengths (K/S) and color differences (ΔE_CMC(2:1)) of these fabric samples for each color series had linear relationships with the color depths of warp and weft yarns. The color tolerance ellipses indicated that, even though the warp and weft yarns had an apparent color difference, they could be woven in fabrics with relatively uniform color appearance and meet the requirements for yarn-dyed fabric. This work provided valuable insight into the production of qualified yarn-dyed fabrics from unqualified dyed yarns.     

Site occupation and energy transfer in full color emitting phosphor Ba2Ca(BO3)2:Ce3+(K+),Eu2+,Mn2+

White light-emitting diodes (WLEDs) fabricated by single-phase full color emitting phosphor are an emerging solution for health lighting. The crystallographic site occupation of activators in a proper host lattice is crucial for sophisticated design of such phosphor. Here, we report a high quality white light-emitting phosphor Ba₂Ca(BO₃)₂:Ce³⁺(K⁺),Eu²⁺,Mn²⁺ with spectral distribution covering whole visible region. Blue light emission originates from Ce³⁺ ions occupying preferentially Ba²⁺ site by controlling synthesis conditions. Green and red lights are obtained from Eu²⁺ occupying Ba²⁺ (and Ca²⁺) site and Mn²⁺ occupying Ca²⁺ site, respectively. In this triple-doped phosphor, strong red emission with a low concentration of Mn²⁺ is realized by the efficient energy transfer from Ce³⁺ and Eu²⁺ to Mn²⁺. Furthermore, high quality white light is accomplished by properly tuning the relative doping amount of Ce³⁺(K⁺)/Eu²⁺/Mn²⁺ based on efficient simultaneous energy transfer. The results indicate that Ba₂Ca(BO₃)₂:Ce³⁺(K⁺),Eu²⁺,Mn²⁺ is a promising white light-emitting phosphor in WLEDs application.     

Cold sintered,temperature-stable CaSnSiO5-K2MoO4 composite microwave ceramics and its prototype microstrip patch antenna

Dense (1-x)wt%CaSnSiO₅-xwt%K₂MoO₄ (CSSO-KMO) composite ceramics were fabricated by the cold sintering process at 180 °C under 400 MPa for 60 min. X-ray diffraction, Energy dispersive X-ray and Raman spectroscopy confirmed that CSSO and KMO coexisted without intermediate phases. As KMO weight fraction increased, relative permittivity (ε_r) and temperature coefficient of resonant frequency (τ_f) decreased and the microwave quality factor (Q×f, where f is resonant frequency) increased. Near-zero τ_f (-0.5 ppm/°C) was obtained for 65 wt%CSSO-35 wt%KMO with ε_r ～ 9.2 and Q×f ～ 6240 GHz. No chemical reaction between ceramic composites and silver was observed, demonstrating potential for cofiring with Ag-paste. A prototype antenna was fabricated from 65 wt%CSSO-35 wt%KMO composite ceramic with a bandwidth of 144 MHz @ -10 dB, a gain of 5.7 dBi and a total efficiency of 88.4 % at 5.2 GHz, suitable for 5 G mobile communication systems.     

汽车加油口双色注射模设计

分析了汽车加油口塑件结构,确定了注射成型方案、进胶方式,并介绍了通过滑块与开模动作配合实现塑件脱模的过程。     

Preparation of P(St-NMA) microsphere inks and their application in photonic crystal patterns with brilliant structural colors

Patterned photonic crystals with structural colors on textile substrates have attracted a special attention due to the great advantages in application, which currently become a research hot-spot. This study utilized an ink-jet printing technology to prepare high-quality photonic crystal patterns with structural colors on polyester substrates. The self-assembly temperature of poly(styrene-N-methylol acrylamide) (P(St-NMA)) microspheres set to construct photonic crystals were deeply optimized. Moreover, the structural colors of prepared photonic crystal patterns were characterized and evaluated. When the mass fraction of P(St-NMA) microspheres was 1.0 wt.%, the pH value ranged from 5 to 7, and the surface tension was in the range of 63.79 to 71.20 mN/m, inks could present the best print performance. At 60 °C, prepared P(St-NMA) microsphere inks were good for printing to obtain patterned photonic crystals with regular arrangement and beautiful structural colors. Specifically, photonic crystals with different colors could be constructed by regulating the diameter of microspheres in inks, and prepared structural colors exhibited distinct iridescent phenomenon. The present results could provide a theoretical basis for the industrial realization of patterned photonic crystals by ink-jet printing technology.     

市售西班牙自然发酵香肠的食用品质特征分析

以销量较高的市售西班牙自然发酵香肠为研究对象，通过感官评价筛选出喜好度较高的发酵香肠，测定香肠水分含量、pH值、色泽、质地等指标，采用顶空固相微萃取-气相色谱-质谱联用（headspace-solid phase microextraction-gas chromatography-mass spectrometry，HS-SPME-GC-MS）法分析香肠挥发性风味成分。结果表明，总体可接受性较高的自然发酵香肠具有以下特征：光泽度高、色泽暗红（亮度值16.028～31.399，红度值13.80～16.31），组织紧密、质地均一、硬度（4 721.859 0～6 360.352 0 g）适中，pH值（5.68～5.89）、水分含量（20.12%～28.09%）较低，咀嚼感好、干燥度适中，果香味、清香味、甜味、乳香味、鲜味明显，咸味、酸味适中，胡椒味较淡。总体接受性最高的香肠（1号香肠）中检出81 种挥发性风味成分，其中乙醛、异戊醛、2,3-丁二酮、月桂烯、3-甲基丁酸乙酯、顺-4-羟基-6-十二烯酸内酯、乙酸为主要风味成分（香气活力值＞50）。     

Sustainable progress into batchwise coloration of polyurethane nanofibers by using ultrasonic energy

Abstract

In this decade, aesthetic potentials of electrospun polymeric nanofibers for advanced apparels have been studied. For the first time, we studied the sustainable aspects in the batchwise dyeing process of electrospun polymeric nanofibers in terms of conserving thermal energy and reducing the wastewater pollution. The nanofibrous mats were prepared using polyurethane (PU) polymer followed by dyeing with disperse dyes by conventional (CN) dyeing method as well as ultrasonic (US)-assisted dyeing method. Potential of savings in thermal energy (1000?kcal), dwell time (40?min) and quantity of disperse dyes (1.5% on the mass of nanofibers) were realized during the US-assisted dyeing method in comparison with the CN dyeing method. Further, total dissolved solids (TDS) and chemical oxygen demand (COD) contents of dyeing effluents demonstrated considerable ecological merits of the US dyeing method in terms of 30% reduction in TDS and 46% reduction in COD contents in comparison with the CN dyeing method. Excellent color strength (K/S) (reached 10) of dyed PU nanofibrous mats were achieved by US-assisted dyeing method in comparison with the K/S (reached 6) with CN dyeing method. Attenuated total reflectance-Fourier transform infra-red (FTIR) spectroscopy, UV–Vis spectrophotometer and Scanning electron microscopy (SEM) analysis were also applied during the study for characterization.     

Analysis of color volume of multi‐chromatic displays using gamut rings

There are claims that multi‐chromatic displays can achieve a wider color gamut by the use of additional highly saturated secondary color channels. However, there are other claims that these displays lose lightness and/or color saturation at brighter levels. These apparently divergent views have led to some controversy in the display industry and at standard setting organizations. This study examines the color gamut volume for a variety of simulated and measured multi‐chromatic (sometimes incorrectly referred to as “multi‐primary”) displays using combinations of white and/or secondary color channels, such as cyan, magenta, and yellow. Furthermore, a two‐dimensional gamut representation, referred to as “gamut rings,” is introduced to illustrate that the addition of nonprimary optical color channels to a trichromatic (RGB) display can result in a significant decrease in the chroma at higher lightness levels. The additional saturated color channels can increase the gamut volume only around their hues at darker levels. The results also confirm the validity of comparing the color light output and white light output for revealing the design trade‐offs between the high‐peak white and the color‐image brightness for multi‐chromatic displays.     

基于Faster R-CNN的颜色导向火焰检测

基于深度特征的目标检测方法Faster R-CNN在火焰检测任务上存在检测效率低的问题,因此提出了基于颜色引导的抛锚策略。该策略设计火焰颜色模型来限制锚的生成,即利用火焰颜色约束锚的生成区域,从而减少了初始锚的数量,提升了计算效率。为了进一步提高网络的计算效率,将区域生成网络中的卷积层替换成掩膜卷积。为了验证所提方法的检测效果,采用BoWFire和Corsician数据集进行验证。实验结果表明,该方法实际检测速度相较于原Faster R-CNN提高了10.1%,BoWFire上该方法的火焰检测F值为0.87,Corsician上该方法的准确度可达99.33%。所提方法可以提高火焰检测的效率,并能够准确检测图像中的火焰。