Influence of accelerated curing on the compressive strength of polymer-modified concrete

In recent building practice, rapid construction is one of the principal requisites. Furthermore, in designing concrete structures, compressive strength is the most significant of all parameters. While 3-d and 7-d compressive strength reflects the strengths at early phases, the ultimate strength is paramount. An effort has been made in this study to develop mathematical models for predicting compressive strength of concrete incorporating ethylene vinyl acetate (EVA) at the later phases. Kolmogorov-Smirnov (KS) goodness-of-fit test was used to examine distribution of the data. The compressive strength of EVA-modified concrete was studied by incorporating various concentrations of EVA as an admixture and by testing at ages of 28, 56, 90, 120, 210, and 365 d. An accelerated compressive strength at 3.5 hours was considered as a reference strength on the basis of which all the specified strengths were predicted by means of linear regression fit. Based on the results of KS goodness-of-fit test, it was concluded that KS test statistics value (D) in each case was lower than the critical value 0.521 for a significance level of 0.05, which demonstrated that the data was normally distributed. Based on the results of compressive strength test, it was concluded that the strength of EVA-modified specimens increased at all ages and the optimum dosage of EVA was achieved at 16% concentration. Furthermore, it was concluded that predicted compressive strength values lies within a 6% difference from the actual strength values for all the mixes, which indicates the practicability of the regression equations. This research work may help in understanding the role of EVA as a viable material in polymer-based cement composites.     

Phosphorylated chitosan/poly(vinyl alcohol) based proton exchange membranes modified with propylammonium nitrate ionic liquid and silica filler for fuel cell applications

In our previous work, phosphorylated chitosan was modified through polymer blending with poly(vinyl alcohol) (PVA) polymer to produce N-methylene phosphonic chitosan/poly(vinyl alcohol) (NMPC/PVA) composite membranes. The aim of this work is to further investigate the effects of a propylammonium nitrate (PAN) ionic liquid and/or silicon dioxide (SiO₂) filler on the morphology and physical properties of NMPC/PVA composite membranes. The temperature-dependent ionic conductivity of the composite membranes with various ionic liquid and filler compositions was studied by varying the loading of PAN ionic liquid and SiO₂-PAN filler in the range of 5–20 wt%. As the loading of PAN ionic liquid increased in the NMPC/PVA membrane matrix, the ionic conductivity value also increased with the highest value of 0.53 × 10^?3 S cm^?1 at 25 °C and increased to 1.54 × 10^?3 S cm^?1 at 100 °C with 20 wt% PAN. The NMPC/PVA-PAN (20 wt%) composite membrane also exhibited the highest water uptake and ion exchange capacity, with values of 60.5% and 0.60 mequiv g^?1, respectively. In addition, in the single-cell performance test, the NMPC/PVA-PAN (20 wt%) composite membrane displayed a maximum power density, which was increased by approximately 14% compared to the NMPC/PVA composite membrane with 5 wt% SiO₂-PAN. This work demonstrated that modified NMPC/PVA composite membranes with ionic liquid PAN and/or SiO₂ filler showed enhanced performance compared with unmodified NMPC/PVA composite membranes for proton exchange membrane fuel cells.     

Development and characterization of poly(vinyl alcohol) and casein blend films

Blends of plasticized casein (CA) and poly(vinyl alcohol) (PVA) at various ratios were prepared using the solution‐casting method. The prepared blend solutions were cast onto polystyrene petri plates and bend films were obtained. The characterization of films was performed using Fourier transform infrared spectroscopy, tensile testing, thermogravimetric analysis, contact angle measurements and water vapour permeability. According to spectroscopic analysis, there were interactions between the CA and PVA molecules. The tensile test results showed that the tensile strength of CA increased with increasing PVA content. The flexibility of plasticized CA film increased with the incorporation of PVA. The thermal stability and water vapour barrier properties of plasticized CA improved on blending with PVA. As a result, it was seen that blend films were successfully produced using plasticized CA and PVA with potential for use in biodegradable packaging applications. © 2019 Society of Chemical Industry     

Preparation and characterization of highly stable protic-ionic-liquid membranes

A highly durable proton exchange membranes (PEM)s based on covalently supported ionic liquid (IL) bearing sulfonic acid imidazolium groups were successfully fabricated. The membrane preparation involved radiation induced grafting of 1-vinyl imidazole (1-VIm) onto poly(ethylene-co-tetraflouroethene) (ETFE) film, followed by covalent immobilization of 3-sulfopropyl and subsequent treatment with trifluoromethanesulfonic acid. The ionic conductivity of the supported IL membranes was increased with the increase in the concentration of IL and reached a maximum value of 138 mS cm⁻¹ in a fully hydrated state with an ion exchange capacity of 4.82 mmol g⁻¹ that is higher than Nafion with a similar thickness. The membranes displayed excellent chemical and mechanical stability. In addition, the dimensional and thermal stability of supported IL-membranes were significantly higher than commercial Nafion membranes.     

碳纤维/乙烯基酯树脂复合材料拉伸性能研究

研究了碳纤维进行氧化处理、铺层形式,以及紫外光照射和不同溶液介质浸泡处理等,对碳纤维/乙烯基酯树脂复合材料拉伸性能的影响。结果表明:碳纤维最佳氧化工艺为浓硝酸氧化1 h,空气氧化温度250℃,空气氧化30 min。碳纤维最佳铺层设计为[0°,0°,45°]2s。随紫外光照射时间增加,复合材料拉伸强度呈先增后降趋势,120 h时达最大值。溶液介质浸泡会降低复合材料的拉伸强度。温度相同溶液介质不同时,复合材料在NaOH溶液中拉伸强度降低程度最大,温度提高会加速复合材料失效老化。     

淀粉/聚乙烯醇活性包装薄膜及其在食品包装应用中的研究进展

综述了淀粉/聚乙烯醇（PVA）活性包装薄膜及其在食品包装中的研究进展，主要对从不同比例共混、疏水改性、增强改性等方面对淀粉/PVA薄膜的改性研究，从功能特性和活性物质对薄膜性能的影响2个方面对淀粉/PVA活性薄膜研究和薄膜在食品包装中的应用3个方面进行了归纳总结，旨在为以淀粉/PVA为基材的活性包装薄膜研究提供参考。     

卡系费休法测定氯乙烯单体中水含量的影响因素

介绍了卡尔费休法的测定原理,具体分析了采用卡尔费休法测定氯乙烯单体中水含量的影响因素,指出采用闪蒸仪进样器,能有效提高分析结果的准确性和工作效率。     

Imidazolium functionalized poly(vinyl alcohol) membranes for direct methanol alkaline fuel cell applications

In this study, imidazolium functionalized poly(vinyl alcohol) (PVA) was synthesized by acetalization and direct quaternization reaction. Afterwards, composite anion exchange membranes based on imidazolium‐ and quaternary ammonium‐ functionalized PVA were used for direct methanol alkaline fuel cell applications. ¹H NMR and Fourier transform infrared spectroscopy data indicated that imidazole functionalized PVA was successfully synthesized. Inductively coupled plasma mass spectrometry data demonstrated that the imidazolium structure was efficiently obtained by direct quaternization of the imidazole group. Composite anion exchange membranes were fabricated by application of the functionalized PVA solution on the surface of porous polycarbonate (PC) membranes. Fuel cell related properties of all prepared membranes were investigated systematically. The imidazolium functionalized composite membrane (PVA‐Im/PC) exhibited higher ionic conductivity (7.8 mS cm^?1 at 30 °C) despite a lower water uptake and ion exchange capacity value compared to that of quaternary ammonium. In addition, PVA‐Im/PC showed the lowest methanol permeation rate and the highest membrane selectivity as well as high alkaline and oxidative stability. Dynamic mechanical analysis results reveal that both composite membranes were mechanically resistant up to 10⁷ Pa at 140 °C. The superior performance of imidazolium functionalized PVA composite membrane compared to quaternary ammonium functionalized membrane makes it a promising candidate for direct methanol alkaline fuel cell applications. © 2020 Society of Chemical Industry     

卡尔费休法测定液态氯乙烯中水含量的研究

采用卡尔费休法测定了液态氯乙烯单体中的水含量。试验确定了采样工具、样品的预处理方式及选用溶剂的最优方案,并进行了精密度与准确度的验证。结果表明卡尔费休法测定液态氯乙烯单体中的水含量准确、快速,可以用来准确、及时地指导生产。     

Properties of polyamide 6,10/poly(vinyl alcohol) blends and impact on oxygen barrier performance

The oxygen transmission rate, average volume of free‐volume cavities (V_f) and fractional free volume (F_v) of polyamide 6,10 (PA610)/poly(vinyl alcohol) (PVA) (i.e. PA610_xPVA⁰⁵_y, PA610_xPVA⁰⁸_y and PA610_xPVA¹⁴_y) blend films reduced to minimum values when their PVA contents reached corresponding optimal values. Oxygen transmission rate, V_f and F_v values obtained for optimal PA610_xPVA^z_y blown films were reduced considerably with decreasing PVA degrees of polymerization. The oxygen transmission rate of the optimal bio‐based PA610₈₀PVA⁰⁵₂₀ blown film was only 2.4 cm³ (m²·day·atm)^?1, which is about the same as that of the most often used high‐barrier polymer, ethylene–vinyl alcohol copolymer. Experimental findings from dynamic mechanical analysis, differential scanning calorimetry, wide‐angle X‐ray diffraction and Fourier transform infrared spectroscopy of the PA610_xPVA^z_y blends indicate that PA610 and PVA in the blends are miscible to some extent at the molecular level when the PVA contents are less than or equal to the corresponding optimal values. The considerably enhanced oxygen barrier properties of the PA610_xPVA^z_y blend films with optimized compositions are attributed to the significantly reduced local free‐volume characteristics. © 2017 Society of Chemical Industry