Lactobacillus reuteri-fortified camel milk infant formula: Effects of encapsulation,in vitro digestion,and storage conditions on probiotic cell viability and physicochemical characteristics of infant formula

Lactobacillus reuteri fortified camel milk infant formula (CMIF) was produced. The effect of encapsulation in different matrices (sodium alginate and galacto-oligosaccharides) via spray drying, simulated infant gastrointestinal digestion (SIGID), and storage conditions (temperature and humidity) on the viability of L. reuteri in CMIF and the physicochemical properties of CMIF were evaluated. Compared with free cells, probiotic cell viability was significantly enhanced against SIGID conditions upon encapsulation. However, L. reuteri viability in CMIF decreased after 60 d of storage, predominantly at higher storage humidity and temperature levels. At the end of the storage period, significant changes in the color values were observed in all CMIF, with a reduction in their greenness, an increase in yellowness, and a wide variation in their whiteness. Moreover, pH values and caking behavior of all CMIF stored at higher temperature (40°C) and humidity [water activity (a_w) = 0.52] levels were found to be significantly higher than the samples stored under other conditions. Over 30 d of storage at lower humidity conditions (a_w = 0.11 and 0.33) and room temperature (25°C), no significant increase in CMIF lipid oxidation rates was noted. Fourier-transform infrared spectroscopy analysis showed that, compared with the other storage conditions, CMIF experienced fewer changes in functional groups when stored at a_w = 0.11. Microscopic images showed typical morphological characteristics of milk powder, with round to spherical-shaped particles. Overall, camel milk fortified with encapsulated L. reuteri can be suggested as a promising alternative in infant formula industries, potentially able to maintain its physicochemical characteristics as well as viability of probiotic cells when stored at low humidity levels (a_w = 0.11) and temperature (25°C), over 60 d of storage.     

Impact of viscous dissipation and Dufour on MHD natural convective flow past an accelerated vertical plate with Hall current

The present research work concentrates on viscous dissipation, Dufour, and heat source on an unsteady magnetohydrodynamics natural convective flow of a viscous, incompressible, and electrically conducting fluid past an exponentially accelerated infinite vertical plate in the existence of a strong magnetic field. The presence of the Hall current induces a secondary flow in the problem. The distinguishing features of viscous dissipation and heat flux produced due to gradient of concentration included in the model along with heat source as they are known to arise in thermal-magnetic polymeric processing. The flow equations are discretized implicitly using the finite difference method and solved using MATLAB fsolve routine. Numerical values of the primary and secondary velocities, temperature, concentration, skin friction, Nusselt number, and Sherwood number are illustrated and presented via graphs and tables for various pertinent parametric values. The Dufour effect was observed to strengthen the velocity and temperature profile in the flow domain. In contrast, due to the impact of viscous dissipation, the local Nusselt number reduces. The study also reveals that the inclusion of the chemical reaction term augments the mass transfer rate and diminishes the heat transfer rate at the plate.     

Multilayer Si@SiOx@void@C anode materials synthesized via simultaneously carbonization and redox for Li-ion batteries

In the development of high-performance lithium-ion batteries (LIBs), the composition and structure of electrode materials are of critical importance. Silicon has a theoretical specific capacity 10 times that of graphite, nonetheless, its application as an anode material confronts challenge as it undergoes huge volume change and pulverization amidst the alloying and dealloying processes. Herein, a novel method to prepare a multilayer Si-based anode was proposed. Three layers, SiO₂, nickel and triethylene glycol (TEG), were coated successively on Si nanoparticles, which served respectively as the sources of SiO_x, sacrificial templates and carbon. Nickel can not only serve as a hollow template, but also play a catalytic role, which makes carbonization and redox reactions occur synchronously under a mild condition. Amid the carbonization process of TEG at 450 °C, several-nm-thick SiO₂ layer can react with the as-derived carbon to form a silicon suboxides (SiO_x (0 < x < 2)) intermedium layer. After removing the nickel template, a micro-nano scaled Si@SiO_x@void@C with conformal multilayer-structure can be obtained. The BET specific surface area and pore volume of powders were increased dramatically because of the derivation of abundant voids, which can not only buffer the swelling effect of silicon, but also provide richer ionic conductivity. The as-assembled half-cell with Si@SiOx@void@C as the anode material possesses high capacity (～1000 mAh g^?1 at 3 A g^?1), long cycle life (300 cycles with 77% capacity retention) and good rate performance (558 mAh g^?1 at 5 A g^?1).     

Adomian decomposition method for the MHD flow of a viscous fluid with the influence of dissipative heat energy

An investigation is carried out on the effect of dissipative heat energy on the flow of an electrically conducting viscous fluid past a shrinking sheet. Both viscous and Joule dissipation effects are considered along with heat generation/absorption for the enhancement of heat transfer properties. The governing nonlinear coupled partial differential equations are transformed into nonlinear ordinary differential equations by a suitable choice of similarity transformations. However, the complex transformed equations are solved by an approximate analytical method known as the Adomian decomposition method with a suitable initial guess solution assumed from the known initial conditions. Moreover, the behavior of several parameters characterizing the flow phenomena are studied via graphs and the numerical computations for the engineering coefficients are obtained and presented through tables. However, the major outcomes of the results are that a higher suction is required to resist the fluid temperature and sinks as well as the dissipative heat energy favors enhancing the fluid temperature at all points in the flow domain.     

Impact of β-glucan on debittering,bioaccessibility and storage stability of skim milk fortified with shrimp oil nanoliposomes

Shrimp oil was encapsulated in nanoliposomes and fortified into skim milk. Shrimp oil nanoliposomes (SONL) were thermodynamically stable when added into skim milk at 10 mL 100 mL⁻¹. Mild bitterness in fortified skim milk caused by the SONL was masked by adding β-glucan at various levels (0.05–0.2 g 100 mL⁻¹). With the addition of SONL, fortified skim milk appeared more reddish in colour due to the presence of astaxanthin. Addition of β-glucan resulted in the increase in viscosity of the fortified milk by forming network of junction zones. During the storage of skim milk fortified with SONL and 0.1 g 100 mL⁻¹ β-glucan at 4 °C for 15 days, no major quality changes took place. Simulated in vitro digestion studies revealed that 45.41 g 100 g⁻¹ eicosapentaenoic acid (EPA) and 48.86 g 100 g⁻¹ docosahexaenoic acid (DHA) from shrimp oil were bioaccessible for absorption in the gut after digestion.     

Material encapsulation in poly(methyl methacrylate) shell: A review

Material encapsulation is a relatively new technique for coating a micro/nanosize particle or droplet with polymeric or inorganic shell. Encapsulation technology has many applications in various fields including drug delivery, cosmetic, agriculture, thermal energy storage, textile, and self-healing polymers. Poly(methyl methacrylate) (PMMA) is widely used as shell material in encapsulation due to its high chemical stability, biocompatibility, nontoxicity, and good mechanical properties. The main approach for micro/nanoencapsulation of materials using PMMA as shell comprises emulsion-based techniques such as emulsion polymerization and solvent evaporation from oil-in-water emulsion. In the present review, we first focus on the encapsulation techniques of liquid materials with PMMA shell by analyzing the effective processing parameters influencing the preparation of PMMA micro/nanocapsules. We then describe the morphology of PMMA capsules in emulsion systems according to thermodynamic relations. The techniques to investigation of mechanical properties of capsule shell and the release mechanisms of core material from PMMA capsules were also investigated. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48039.     

Chemical Stability of α‐Tocopherol in Colloidal Lipid Particles with Various Morphologies

Colloidal lipid particles (CLPs) are promising encapsulation systems for lipophilic bioactives, such as oil‐soluble antioxidants that are applied in food and pharmaceutical formulations. Currently, there is no clear consensus regarding the relation between particle structure and the chemical stability of such bioactives. Using α‐tocopherol as a model antioxidant, it is shown that emulsifier type (Tween 20 or 40, or sodium caseinate) and lipid composition (tripalmitin, tricaprylin, or combinations thereof) modulated particle morphology and antioxidant stability. The emulsifier affects particle shape, with the polysorbates facilitating tripalmitin crystallization into highly ordered lath‐like particles, and sodium caseinate resulting in less ordered spherical particles. The fastest degradation of α‐tocopherol is observed in tripalmitin‐based CLPs, which may be attributed to its expulsion to the particle surface induced by lipid crystallization. This effect is stronger in CLPs stabilized by Tween 40, which may act as a template for crystallization. This work not only shows how the architecture of CLPs can be controlled through the type of lipid and emulsifier used, but also gives evidence that lipid crystallization does not necessarily protect entrapped lipophilic bioactives, which is an important clue for encapsulation system design. Practical Applications: Interest in enriching food and pharmaceutical products with lipophilic bioactives such as antioxidants through encapsulation in lipid particles is growing rapidly. This research suggests that for efficient encapsulation, the particle architecture plays an important role; to tailor this, the contribution of both the lipid carrier and the emulsifier needs to be considered.     

高湿黏性颗粒在聚四氟乙烯微孔膜滤料表面沉积特性的数值模拟

基于聚四氟乙烯(PTFE)微孔膜滤料扫描电镜(SEM)图像，建立PTFE微孔膜滤料微观结构模型，采用计算流体力学和离散单元法(CFD?DEM)耦合的方法对黏性颗粒在微孔膜滤料表面沉积特性进行模拟，引入液桥力模型，忽略范德华力的作用，统计计算域内颗粒的受力情况，分析了不同表面能条件下3~6 ?m粒径颗粒在微孔膜滤料表面的沉积特性，将模拟结果与黏附效率的经验公式进行对比。结果表明，黏附效率与经验值、颗粒受力与液桥力模型的相对误差均在6%以内，CFD?DEM耦合计算方法可用于模拟不同环境湿度条件下的颗粒沉积；过滤风速、粒径与黏性是影响沉积形态的重要因素，提高过滤风速及增大颗粒粒径与黏性，颗粒更易在滤料表面形成稳定的树突结构，黏附效率及含尘压降增加。环境相对湿度影响两物体间液桥体积，接触力影响颗粒沉积，当增加表面能与液桥体积时，接触力及液桥力均相应增加，根据受力平衡原理，环境相对湿度对颗粒沉积影响很大。     

Improved roughness model for turbulent flow in 2D viscous‐inviscid panel methods

The present study presents a modified expression for the turbulent skin friction coefficient ( C _f ) in 2D viscous‐inviscid panel methods. The modified C _f expression includes surface roughness effects and is therefore believed to be an improvement to the modelling of leading edge roughness (LER) effects on airfoils. The basis for the study is the two‐equation viscous formulation used in 2D viscous‐inviscid panel methods, where the standard integral momentum and kinetic energy shape parameter equations are solved together with a number of turbulent closures. One of the closures relates the skin friction coefficient with the shape parameter and the momentum thickness Reynolds number. The relation is derived from Coles' law of the wake, which reasonably accurately describes any 2D turbulent boundary layer velocity profile. This is used to derive a new C _f ‐expression with the Prandtl‐Schlichting sand grain roughness effect included, which is implemented in the Q³UIC code. Simulations on a NACA63‐418 profile with sand grain roughness on the forward part are compared with measurements and show an improved agreement with the measurements.