基于卷积神经网络的安全防御模式研究

云计算、大数据、5G通信等技术的快速发展，有力的促进了计算机网络在多个领域的普及和使用，人们已经进入到了“互联网+”时代，实现了工作、生活和学习的数字化、智能化和共享化。计算机网络在为人们提供各种便利服务的同时也面临着许多的安全威胁，比如木马、病毒等，不法分子攻击网络数据中心，破坏用户服务终端及服务器，为人们带来严重的威胁。网络安全学者或企业机构也提出了许多安全防御技术，比如入侵检测技术、深度包过滤技术、防火墙技术、数据加密技术等，一定程度上提高了网络安全防御的能力，但是随着互联网数据流量的增多，需要引入更加先进的人工智能技术，以便能够快速的采集、分析网络数据流，确定数据流中是否存在病毒或木马，以便及时的对其进行查杀，进一步提高网络安全防御的主动性、积极性     

A Lane-Level Road Marking Map Using a Monocular Camera

The essential requirement for precise localization of a self-driving car is a lane-level map which includes road markings (RMs). Obviously, we can build the lane-level map by running a mobile mapping system (MMS) which is equipped with a high-end 3D LiDAR and a number of high-cost sensors. This approach, however, is highly expensive and ineffective since a single high-end MMS must visit every place for mapping. In this paper, a lane-level RM mapping system using a monocular camera is developed. The developed system can be considered as an alternative to expensive high-end MMS. The developed RM map includes the information of road lanes (RLs) and symbolic road markings (SRMs). First, to build a lane-level RM map, the RMs are segmented at pixel level through the deep learning network. The network is named RMNet. The segmented RMs are then gathered to build a lane-level RM map. Second, the lane-level map is improved through loop-closure detection and graph optimization. To train the RMNet and build a lane-level RM map, a new dataset named SeRM set is developed. The set is a large dataset for lane-level RM mapping and it includes a total of 25157 pixel-wise annotated images and 21000 position labeled images. Finally, the proposed lane-level map building method is applied to SeRM set and its validity is demonstrated through experimentation.      

移动物料信息分布式传输方法及应用

在流程工业生产中,移动物料计量信息的传输普遍采用电台和无线模块。接收电台周围环境严重影响计量信息的传输效果,尤其是钢结构厂房、电磁干扰区内,数据传输过程中的丢包率、误码率相当严重。本文提出一种多节点分布式传输方法,根据各个生产作业区环境条件设置相应的WIFI节点数,实现对作业区的无线信号覆盖。网络覆盖区内无线模块、PDA终端(PDA)、终端查询设备通过节点工作频段和阵列天线自适应调节,实现数据传输最佳化。铜熔炼生产现场测试表明,此种传输方法可以有效消除周围环境的电磁干扰,数据丢包率低于0.1%。     

EMA-PRBDS: efficient multi-attribute packet rank based data scheduling in wireless sensor networks for real-time monitoring systems

ABSTRACT

In recent years, Wireless Sensor Networks (WSNs) are widely placed in real-time monitoring systems like environmental, structural, patient monitoring, etc. The major criterion for WSN includes energy efficiency and network lifetime. Scheduling is used as a large number of data packets focus on the same queue at the same time. Only limited data scheduling schemes have been implemented in WSN to enhance the performance. The existing First Come First Serve (FCFS) and Dynamic Multilevel Priority (DMP) have some technical challenges like delay, packet drop and high energy consumption due to starvation and deadlock. In this paper, we proposed a new algorithm to optimise and rank the incoming data packets based on multi-attributes decision-making methodology named as Packet Rank Based Data Scheduling (PRBDS), the algorithm selects packet priority, deadline, and size as the metrics to rank the incoming data packets. A simulation result shows when compared with existing scheduling, PRBDS not only provides less energy consumption, also significantly reduces the packet drop and increases the lifetime. Thus, the proposed algorithm is most suitable for real-time monitoring system since it combines data ranking method with scheduling algorithm to create accurate and reliable results to evaluate the incoming data packets.     

Optimal filtering and control for wireless networked closed-loop control systems

This article studies the optimal filtering and control for wireless networked control systems (WNCSs). In WNCSs, packets may be lost in both control and feedback channels and user datagram protocol is usually used to improve the performance of the real-time control. Relevant literature indicates that the conventional optimal filtering for such a system cannot be applied in practice due to the complex calculation with Gaussian mixtures. This paper proposes a novel scheme to realize the optimal filtering and the linear quadratic Gaussian control for WNCSs, in which the controlled node performs a local estimation and the remote-control node performs the final estimation and control, and a synchronization of two estimators is guaranteed by a communication mechanism. An optimal filtering algorithm is developed, the stability condition of the filtering error covariance is obtained, optimal finite-horizon and infinite-horizon control are derived, and the stability of the closed-loop control system is proved. Numerical simulations show the validity and feasibility of the theoretical results.     

具有双通道数据包丢失的Delta算子系统故障检测

研究同时存在双通道数据包丢失和时变时延的Delta算子网络控制系统（NCSs）故障检测问题.假定数据包丢失发生在控制器到执行器、传感器至控制器的数据传输过程中，并且利用两个相互独立的伯努利随机变量描述是否发生丢包.将上述的NCSs建模为网络切换系统，提出任意切换律下故障检测滤波器的设计方法.利用线性矩阵不等式（LMIs）方法、Lyapunov-Krasovskii泛函和平均驻留时间等得出所考虑的网络切换系统具备指数均方稳定性的充分条件.证明了所用的网络切换系统满足H_∞性能，并推导出了滤波器参数的显式表达.数值仿真结果验证了所提方法的有效性.     

基于深度信念网络的列车故障音频诊断方法

铁路在交通运输行业有着举足轻重的地位，一旦列车发生故障将会导致严重的生命财产损失。由于列车发生故障的概率相对较低，因此难以捕获列车的故障样本。针对上述问题，提出了一种无监督学习的列车故障识别方法，通过检测列车音频信号来识别列车故障。该方法基于深度信念网络(DBN)，利用小波包分解提取检测信号的特征向量并将其作为DBN的输入，待网络充分训练后，由训练好的DBN识别当前列车的运行状况。现场监测实验结果表明，该方法能够在无监督的条件下有效识别列车故障，保障了列车的运行安全。     

面向噪声丢包感知的无线网络拥塞算法

针对无线网络链路干扰大、误码率高等特点，以及TCP Westwood算法（TCPW）存在估算带宽时过度依赖包的反馈，缺乏区分传输过程中丢包类型的缺点等问题，提出一种TCPW拥塞控制优化算法--TCPW-F。该算法利用发送速率等构建拥塞因子[F]作为判断丢包类型的依据，同时对判定发生噪声丢包时的拥塞窗口进一步调整，避免噪声丢包引起的窗口下降，提高该情况下窗口的发送效率。仿真结果表明，TCPW-F算法在时延性能方面表现更优，单位时间抖动趋于稳定的速度更快。在同一信道带宽下增大包生成速率，改进算法的实时吞吐量明显高于原算法，具备一定的噪声丢包感知能力，无线网络的TCP传输质量获得较大改善。     

Packet loss detection in networked control systems

One of the main issues related to the reliable operation of network control systems concerns the design of mechanisms able to detect anomalies in the functioning of the communication network through which the control loops are closed. In this article, we address the problem of detecting the occurrence of packet losses and design a mechanism that can detect the occurrence of packet losses directly from process sensor data. Specifically, we propose a moving‐horizon estimation scheme that permits to detect if the packet‐loss rate exceeds prescribed thresholds, which are representative of stability and performance of the control system. We discuss theoretical properties of the proposed solution along with an approximation scheme with reduced computational burden. A numerical example is discussed to substantiate the analysis.     

基于小波分析的谐波在线监测系统

针对传统谐波在线监测系统存的结果不准确，无法描述谐波动态变化特点，设计了基于小波分析的谐波在线监测系统。首先设计了谐波在线监测系统的硬件模块，然后谐波在线监测系统的软件模块，依据小波变换分析谐波信号特征，得到的谐波变化率，从而谐波在线监测系统的监测结果，最后采用具体实验进行了谐波在线监测系统性能的仿真实验，由实验结果可知，该系统的谐波监测精度高，可以有效检测各种谐波分量，保证电力系统稳定运行。