Soluble polyimide as liquid crystal perpendicular alignment layer

Journal of Materials Science - Three polyimides (PIs) were prepared from a diamine containing biphenyl ester group as a side chain and a corresponding dianhydride chosen from...     

减水剂类型对赤泥—矿渣基地聚物注浆材料性能的影响及机理研究

针对赤泥等固体废弃物对环境危害性大且利用率低等问题,以碱激发赤泥-矿渣基地聚物注浆材料为 研究对象,研究了不同掺量的聚羧酸(PA)减水剂、醛酮缩合物(AKC)减水剂和萘系(N)减水剂对材料凝结时间、流动 性及强度等的影响,并通过 XRD、傅里叶红外光谱及 SEM 等设备对减水剂的作用机理进行研究。 结果表明:减水剂增 强了材料的流动性但降低了材料的剪切应力;N 和 PA 减水剂能缩短材料的凝结时间,但 AKC 减水剂会延长材料的凝 结时间;N 和 AKC 减水剂能提高材料的强度,但 PA 减水剂会降低材料的强度;N 减水剂对材料的综合性能提升效果 更加明显,其最优掺量为 0. 7%;减水剂对赤泥-矿渣基地聚物性能提升的作用机理主要是促进地聚合物凝胶的形成。 研究成果为拓展赤泥在工程上的使用途径和效率提供了理论指导。     

PVDF压电纤维仿生柔性传感器水下传感特性研究

感知器官对于许多动物必不可少,尤其是生活在水下的生物。该文以聚偏二氟乙烯(PVDF)为材料,模仿水生动物海豹的触须设计制备了一种表面四电极PVDF压电纤维仿生柔性传感器。利用激振源测试所制备的传感器性能,包括输出不同的波形测试对不同激励的感知,对水动力的感知及对水下运动物体方向的感知。实验结果表明,该传感器对不同激励的感知性能很好,速度检测极限可达0.15 mm/s,且有良好的方向性检测能力,对水下情况感知的应用前景广。     

Simultaneous fractionation of multiple classes of polyphenols from honeybush tea using solid-phase extraction

The structural diversity of polyphenols and the inherent limitations of current extraction techniques pose a challenge to extract polyphenols using a simple and green method. Hence, in this study, a method was developed to simultaneously fractionate multiple classes of polyphenols by only varying ethanol-water solutions. Honeybush tea, which is rich in polyphenols, was selected as a model for this study. Solvent extraction followed by solid-phase extraction (SPE) was developed to obtain a polyphenol-rich fraction from six honeybush samples. Based on a gradient elution programme (10%, 30%, 50%, 70% and 90% (v/v) ethanol-water solution) of SPE, the Strata X cartridge showed a better recovery of most targeted polyphenols under 0.9 mL of the drying volume and 1 mL min⁻¹ of the dispensing speed. The elution programme for fractionating most polyphenols was as follows: single elution with 50% ethanol, followed by twice elution with 70% ethanol. The antioxidant capacity was used to analyse the differences among the polyphenol-rich fractions from six honeybush samples. Principal component analysis (PCA) revealed that unfermented C. genistoides (GG) has the greatest antioxidant capacity among the honeybush species studied. Additionally, mangiferin, isomangiferin and vicenin-2 were the main contributors to the antioxidant capacity in six honeybush fractions according to the correlation study.     

乙烯精馏塔提馏段温度控制系统

针对乙烯精馏塔提馏段温度原控制方案的不足,采用提馏段温度ＧC３气流量组成串级控制方式,提高温度稳定性,同时采用提馏段温度Ｇ丙烯凝液储槽液位的选择性控制系统,克服丙烯凝液储槽出口排出气态丙烯的问题,从而保证生产安全平稳进行.与原控制效果比较,现提馏段温度稳定性和控制精度大大改善,控制质量获得提高。     

双功能催化剂上四氢萘加氢裂化生成单环芳烃的反应网络研究

Conversion of LCO (light cycle oil) to BTX (benzene, toluene, and xylene) is an economically valuable method for refineries. However, this approach still faces difficulties as the main reactions are not clearly understood. Here we study the detailed hydrocracking pathway of typical reactants, 1-methylnaphthalene and tetralin, through molecular simulations and experiments to improve our understanding of the conversion process of LCO to BTX. Molecular simulations demonstrate that the rate-determining step is the isomerization pathway of six-membered ring to five-membered ring in tetralin as its activation energy (ΔEa) is the highest among all the reactions and the order of ΔEa of reactions is isomerization > ring-opening ≈ side-chain cleavage. The results of experiments show that with the increase in reaction depth, i.e., through a high temperature (350 – 370 °C) and low LHSV (4.5 – 6.0 h−1), isomerization, ring-opening, and side-chain  cleavage reactions occurred, thus improving the selectivity and yield of alkyl aromatics.     

基于可供性的文化意象交互式智能音箱设计研究

目的 探索将文化民俗有效融入现代产品中的技术思路，保留并延续中华传统文化的生命力，有助于提升用户体验。方法 分析可供性与文化意象之间的主客观互通性;挖掘交互式智能音箱中的可供性触点;构建形态、感官、认知及情境四类可供性的设计框架;以楚文化意象为例进行设计实践，对智能音箱的产品造型与交互操作方式进行设计，并进行设计评价。结果 在可供性理论指导下的楚文化意象交互式智能音箱产品外观及交互体验设计较好地满足了设计目标和用户需求。结论 可供性有助于文化意象的正确提取与转化，可将意象抽象为具有实际意义的设计要素，帮助用户在生理与认知两个层面理解产品的使用方法，同时进一步回味、体验文化内涵和文化精髓。     

基于KANO模型的后共享时代单车设计决策研究——从设计师与消费者视角

目的 探究消费者对共享单车的需求偏好，获取用户和设计师对产品的认知差距，并提出相应的设计决策，为共享单车以及两轮车行业的产品创新提供启迪与参考。方法 从设计师思维与消费者偏好的视角出发，对共享单车消费者偏好的各项设计原则(属性)进行细致分类，建立8个评价维度与41个评价特征，采用KANO模型对有效回收样本进行定量统计及定性分析。结果 基于前期调研与KANO模型分析，提出后共享时代单车设计的相关策略。结论 在后共享单车时代下，设计师需要根据用户真实的产品偏好与体验感知进行设计策略的研究，以设计出真正满足用户需求和体验期望的产品。同时也证明KANO模型作为一种阐明用户不同感性需求的方法，有助于设计师进行设计决策的综合判断，提升设计的竞争力。