Thermomechanical nonlinear analysis of axially compressed carbon nanotube-reinforced composite cylindrical panels resting on elastic foundations with tangentially restrained edges

Buckling, postbuckling, and nonlinear responses of composite cylindrical panels reinforced by single-walled carbon nanotubes (CNTs), supported by an elastic foundation, exposed to elevated temperature and axially compressed by uniform load are investigated in this article. Distribution of CNTs is uniform or graded in the thickness direction and the effective properties of CNT-reinforced composite are assumed to be temperature dependent, and are estimated by extended rule of mixture through a micromechanical model. Governing equations are established based on thin shell theory taking von Kármán–Donnell nonlinearity, initial geometrical imperfection, Pasternak-type elastic foundation and tangential elastic constraints of boundary edges into consideration. Approximate solutions of deflection and stress functions are assumed to satisfy simply supported boundary conditions, and Galerkin method is applied to derive explicit expressions of load–deflection relation from which critical buckling loads can be obtained. Unlike works in the literature, the present study accounts for elasticity of tangential restraint of two unloaded straight edges in model of cylindrical panel. The study also gives conditions for which bifurcation type buckling response can occur and novel findings in numerical examples.     

A Review on the Separation of Niobium and Tantalum by Solvent Extraction

Niobium and tantalum are found together in natural minerals. Leaching with concentrated acid solution or alkaline roasting followed by water/dilute acid leaching results in a solution containing these two metals. In this work, we reviewed the extraction and separation of Nb(V) and Ta(V) from leach liquors in the absence and presence of hydrofluoric acid by acidic, neutral extractants and amines. Several solvent extraction systems were compared in the light of the requirement of hazardous chemicals, extraction/separation efficiency, and stability/solubility of extractants. Since the cationic species of Nb(V) and Ta(V) are unstable in the aqueous solution, the application of acidic extractants for extraction and separation of these metals is limited. Amines can extract Nb(V) as well as Ta(V) irrespective of the presence of fluoride ion but the separation of these metals from the loaded amines should be carried out in stripping process, resulting in process complexity. Another disadvantage encountered for amine is related to high viscosity in extraction process. Neutral extractants are considered as promising extractants which are effective to separate Ta(V) and Nb(V) from either non-fluoride or to moderate fluoride ion concentration in terms of extraction, separation and stripping efficiency. Compared to the traditional methyl iso-butyl ketone (MIBK) based system, methyl isoamyl ketone (MIAK) is found to be a promising extractant to separate Nb(V) and Ta(V).     

Recommender systems in the healthcare domain: state-of-the-art and research issues

Journal of Intelligent Information Systems - Nowadays, a vast amount of clinical data scattered across different sites on the Internet hinders users from finding helpful information for their...     

Hydrogen production enhancement using hot gas cleaning system combined with prepared Ni-based catalyst in biomass gasification

This paper investigates the hot gas temperature effect on enhancing hydrogen generation and minimizing tar yield using zeolite and prepared Ni-based catalysts in rice straw gasification. Results obtained from this work have shown that increasing hot gas temperature and applying catalysts can enhance energy yield efficiency. When zeolite catalyst and hot gas temperature were adjusted from 250 °C to 400 °C, H₂ and CO increased slightly from 7.31% to 14.57%–8.03% and 17.34%, respectively. The tar removal efficiency varies in the 70%–90% range. When the zeolite was replaced with prepared Ni-based catalysts and hot gas cleaning (HGC) operated at 250 °C, H₂ contents were significantly increased from 6.63% to 12.24% resulting in decreasing the hydrocarbon (tar), and methane content. This implied that NiO could promote the water-gas shift reaction and CH₄ reforming reaction. Under other conditions in which the hot gas temperature was 400 °C, deactivated effects on prepared Ni-based catalyst were observed for inhibiting syngas and tar reduction in the HGC system. The prepared Ni-based catalyst worked at 250 °C demonstrate higher stability, catalyst activity, and less coke decomposition in dry reforming. In summary, the optimum catalytic performance in syngas production and tar elimination was achieved when the catalytic temperature was 250 °C in the presence of prepared Ni-based catalysts, producing 5.92 MJ/kg of lower heating value (LHV) and 73.9% tar removal efficiency.     

Evaluating the Performance of Cooperative NOMA with Energy Harvesting Under Physical Layer Security

Wireless Personal Communications - In this paper, we consider a non-orthogonal multiple access system with imperfect successive interference cancellation and physical layer security where the...     

Mechanical properties of continuous bamboo fiber-reinforced biobased polyamide 11 composites

This study is devoted to the analysis of the properties of continuous bamboo fiber (BF)-reinforced polyamide 11 (PA 11) composites. The SEM observations highlighted continuity between BFs and the polymeric matrix showing a high density of hydrogen bonds. The comparative calorimetric study of the matrix and its composites showed that the crystallinity of PA 11 was not modified by the presence of bamboo fibers. The physical aging observed in PA 11 is no more observed in composites due to physical interactions between PA 11 and BFs. The mechanical properties were investigated by tensile strength and dynamic mechanical analysis. The introduction of BFs enhanced Young's modulus of the matrix by a factor of 10. The presence of BFs also improved the storage shear modulus G′ over the whole temperature range. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47623.     

Morphology-dependent spin Seebeck effect in yttrium iron garnet thin films prepared by metal-organic decomposition

In this study, we examined the dependence of surface morphology and spin Seebeck effect (SSE) voltages on the poly[vinylpyrrolidone] (PVP) concentration in polycrystalline Y₃Fe₅O₁₂ (YIG) ultrathin films on a silicon substrate synthesized by metal-organic decomposition followed by a crystallization process. During fabrication, PVP concentrations of 0.5–2 g were used while all other conditions remained fixed. Atomic force microscopy and grazing incidence X-ray diffraction (XRD) measurements revealed a strong dependence of crystallinity and sample morphology on PVP concentration. The 1-g PVP sample had the smoothest surface, with a root mean square roughness of 0.2 nm, as well as superior bulk uniformity with respect to the shape and intensity of XRD reflection peaks. This was confirmed by scanning electron microscopy measurements of a cross-section of the sample that revealed a uniform film without pores. SSE measurements were performed to obtain the output SSE voltages (V_SSE) of all samples, to which a platinum layer was added as a spin-detection layer. Repeatedly, the 1-g PVP sample had the best performance, demonstrating the importance of film crystallinity and morphology in the spin-to-charge conversion efficiency of YIG films.     

Pd coated one-dimensional Ag nanostructures: Controllable architecture and their electrocatalytic performance for ethanol oxidation in alkaline media

One-dimensional (1D) metal-coated Pd structures are efficient catalysts for the ethanol electro-oxidation and promising strategy for minimizing the Pd-loading toward commercialization of direct ethanol fuel cells (DEFCs). Herein, the decorated and core-shell architectures of a novel Pd coating on Ag nanowires (PdAg-NWs) are controllable by a two-step polyol method based on the galvanic replacement reaction. The integration of uniform shell with a low Pd concentration and partial hollow structure onto 1D PdAg-NWs exhibits the highest efficiency for ethanol oxidation reaction (EOR) in alkaline solution. In comparison with Pd nanoparticles (PdNPs/C), the PdAgNWs/C performes 11 times superior EOR activity, and the onset potential shifts 80 mV negatively. The presence of Ag in PdAg-NWs enhances the absorption capacity of ethanol molecules and hydroxyl ions on the active sites, and improves the catalyst tolerance to CO-like intermediates, making them a potential anodic catalyst for DEFCs.     

Brewing of glucuronic acid-enriched apple cider with enhanced antioxidant activities through the co-fermentation of yeast (Saccharomyces cerevisiae and Pichia kudriavzevii) and bacteria (Lactobacillus plantarum)

Co-fermentation using yeast (Saccharomyces cerevisiae and Pichia kudriavzevii) and the bacteria (Lactobacillus plantarum) as starters isolated from spontaneous sourdough was conducted for the brewing of glucuronic acid (GlcA)-enriched apple cider. The concentration of GlcA in the apple cider co-fermented for 14 d with commercial S. cerevisiae and L. plantarum was 37.7 ± 1.7 mg/mL while a concentration of 62.8 ± 3.1 mg/mL was recorded for fermentation with P. kudriavzevii and L. plantarum, which was higher than the corresponding single yeast fermentation. The co-fermented apple cider revealed higher 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity of 171.67 ± 0.79 µg trolox equivalents (TE)/mL using P. kudriavzevii and L. plantarum, compared to the control (143.89 ± 7.07 µg TE/mL) just using S. cerevisiae. Thus, the co-fermentation of S. cerevisiae and L. plantarum and P. kudriavzevii and L. plantarum provided a new strategy for the development of GlcA-enriched apple cider with enhanced antioxidant capacity.