Experimental study and numerical modeling of mixing by air injection in yield stress fluids using the OpenFOAM software

Mixing by gas injection is an operation used in industrial processes such as wastewater treatment, metallurgy, or methanization in which pressurized gas is injected into a fluid in order to reduce concentrations and temperatures gradients. This study demonstrates how the CFD toolbox OpenFOAM can be used to simulate such flows. Experimental measurements and observations have been performed on a pilot-scale reactor where pressurized air is injected in a yield stress fluid. The volume of fluid method and an adaptive mesh with refinement at the interface have been used to track the gas inclusions. The numerical model accuracy has been assessed by comparing experimental and numerical results related to the bubble's frequency, dimensions, and rising velocities as well as the fluid recirculation, yielded, and unyielded regions in the tank. The influence of injection parameters such as the injection flow rate and the fluid rheological parameters has been quantified.     

Nido-Hydroborate-Based Electrolytes for All-Solid-State Lithium Batteries

Hydroborate-based solid electrolytes have recently been successfully employed in high voltage, room temperature all-solid-state sodium batteries. The transfer to analogous lithium systems has failed up to now due to the lower conductivity of the corresponding lithium compounds and their high cost. Here LiB₁₁H₁₄ nido-hydroborate as a cost-effective building block and its high-purity synthesis is introduced. The crystal structures of anhydrous LiB₁₁H₁₄ as well as of LiB₁₁H₁₄-based mixed-anion solid electrolytes are solved and high ionic conductivities of 1.1 × 10⁻⁴ S cm⁻¹ for Li₂(B₁₁H₁₄)(CB₁₁H₁₂) and 1.1 × 10⁻³ S cm⁻¹ for Li₃(B₁₁H₁₄)(CB₉H₁₀)₂ are obtained, respectively. LiB₁₁H₁₄ exhibits an oxidative stability limit of 2.6 V versus Li⁺/Li and the proposed decomposition products are discussed based on density functional theory calculations. Strategies are discussed to improve the stability of these compounds by modifying the chemical structure of the nido-hydroborate cage. Galvanostatic cycling in symmetric cells with two lithium metal electrodes shows a small overpotential increase from 22.5 to 30 mV after 620 h (up to 0.5 mAh cm⁻²), demonstrating that the electrolyte is compatible with metallic anodes. Finally, the Li₂(B₁₁H₁₄)(CB₁₁H₁₂)  electrolyte is employed in a proof-of-concept half cell with a TiS₂ cathode with a capacity retention of 82% after 150 cycles at C/5.     

Indoor air quality assessment in dwellings with different ventilation strategies in Nunavik and impacts on bacterial and fungal microbiota

Indoor air quality is a major issue for public health, particularly in northern communities. In this extreme environment, adequate ventilation is crucial to provide a healthier indoor environment, especially in airtight dwellings. The main objective of the study is to assess the impact of ventilation systems and their optimization on microbial communities in bioaerosols and dust in 54 dwellings in Nunavik. Dwellings with three ventilation strategies (without mechanical ventilators, with heat recovery ventilators, and with energy recovery ventilators) were investigated before and after optimization of the ventilation systems. Indoor environmental conditions (temperature, relative humidity) and microbiological parameters (total bacteria, Aspergillus/Penicillium, endotoxin, and microbial biodiversity) were measured. Dust samples were collected in closed face cassettes with a polycarbonate filter using a micro-vacuum while a volume of 20 m³ of bioaerosols were collected on filters using a SASS3100 (airflow of 300 L/min). In bioaerosols, the median number of copies was 4.01 × 10³ copies/m³ of air for total bacteria and 1.45 × 10¹ copies/m³ for Aspergillus/Penicillium. Median concentrations were 5.13 × 10⁴ copies/mg of dust, 5.07 × 10¹ copies/mg, 9.98 EU/mg for total bacteria, Aspergillus/Penicillium and endotoxin concentrations, respectively. The main microorganisms were associated with human occupancy such as skin-related bacteria or yeasts, regardless of the type of ventilation.     

From a local community to a global influence. How elBulli restaurant created a new epistemic movement in the world of haute cuisine

Location plays a major role in the building of artistic, technological or scientific movements that emerge in specific locations before achieving a worldwide reach. However, a deeper understanding is needed about the interplay of local/global knowledge dynamics in the epistemic construction of a movement. Based on an in-depth longitudinal study of a critical case, this article sheds light on these issues by analysing the case of ‘techno-emotional cuisine’, a global gastronomic movement initiated and led by chef Ferran Adrià and his team at the restaurant elBulli in Catalonia (in Northern Spain). The results suggest that the dynamics of formation of a new epistemic movement depend on the form and nature of the interactions between the local buzz and global pipelines, and on the capacity of the originating community to develop and diffuse the new rules and ‘episteme’ on a global scale while consolidating them locally.     

On the existence and origin of sluggish diffusion in chemically disordered concentrated alloys

Concentrated single phase solid solutions, including medium- and high-entropy alloys, represent a new class of materials that have recently attracted significant interest due to exceptional functional and structural properties. Their fascinating properties are mainly attributed to the sluggish atomic-level diffusion and transport, but its controlling mechanisms are largely unknown and there is certain skepticism about its very existence. By using microsecond-scale molecular dynamics, on-the-fly and conventional kinetic Monte Carlo, we reveal the governing role of percolation effects and composition dependence of the vacancy migration energy in diffusion. Surprisingly, an increase of concentration of faster species (Fe) in face-centered cubic Ni-Fe alloy may decrease the overall atomic diffusion. Consequently, the composition dependence of tracer diffusion coefficient has a minimum near the site percolation threshold, ～20?at.%Fe. We argue that this coupled percolation and composition-dependent barriers for vacancy jumps within different subsystems in medium- and high-entropy alloys leads, indeed, to the sluggish diffusion. A fast method for preselecting materials with potentially desired properties is suggested.     

Macroscopic and Microscopic Structures of Cesium Lead Iodide Perovskite from Atomistic Simulations

A first‐principles‐based effective Hamiltonian is developed and employed to investigate finite‐temperature structural properties of a prototype of perovskite halides, that is CsPbI₃. Such simulations, when using first‐principles‐extracted coefficients, successfully reproduce the existence of an orthorhombic Pnma state and its iodine octahedral tilting angles around room temperature. However, they also yield a direct transformation from Pnma to cubic $Pm\overline{3}m$ upon heating, unlike measurements that reported the occurrence of an intermediate long‐range‐tilted tetragonal P4/mbm phase in‐between the orthorhombic and cubic phases. Such disagreement, which may cast some doubts about the extent to which first‐principle methods can be trusted to mimic hybrid perovskites, can be resolved by “only” changing one short‐range tilting parameter in the whole set of effective Hamiltonian coefficients. In such a case, some reasonable values of this specific parameter result in the predictions that i) the intermediate P4/mbm state originates from fluctuations over many different tilted states; and ii) the cubic $Pm\overline{3}m$ phase is highly locally distorted and develops strong transverse antiphase correlation between first‐nearest neighbor iodine octahedral tiltings, before undergoing a phase transition to P4/mbm under cooling.     

Investigation of load transfer mechanisms in granular platforms reinforced by geosynthetics above cavities

Geosynthetic-reinforced soils constitute an interesting solution for bridging cavities. Many methods have been developed to analyze the stability of soil-geosynthetic-cavity systems, but none of them is able to take into account all the complexities of these mechanisms. Many researchers have assumed mechanisms developed in the reinforced granular platform when cavities appear, such as load transfer and expansion of materials. However, they are not fully understood because many factors can influence the design, such as the cavity opening processes, the type, and the density of the soil.In this study, a new laboratory apparatus is developed to simulate two different cavity opening procedures (trapdoor and progressive opening) for different geometric configurations. A series of tests is conducted for three granular soils with two different geosynthetic sheets. By measuring the shape of the surface soil settlement and the geosynthetic deflection, the expansion coefficient is calculated. A novel tactile pressure sensor is used to observe the load transfer during the cavity opening. The experimental data are analyzed and the influence of the experimental conditions (geometric and soil properties and the opening procedure) are also discussed. Correspondingly, elicited findings can be used to propose recommendations to improve the existing design methods.     

Rheological and textural properties of lafun,a stiff dough,from improved cassava varieties

We studied the textural and rheological (viscoelastic) properties of fresh lafun dough, a fermented cassava product, and their changes during storage at 45 °C for 5 and 24 h, in order to determine after-cooking storability. Lafun flours were produced from three types of cassava varieties: seven improved white-fleshed varieties, seven improved provitamin A carotenoids (pVAC) varieties and two local white-fleshed varieties; and processed into lafun doughs. Pasting properties of the flours were assessed. Flours from local varieties had pasting profiles with highest viscosities, while pVAC flours had the lowest. The three types of cassava varieties varied significantly in most of their pasting properties. Four promising improved varieties were identified, based on high peak viscosity (55.8–61.5 P) and stiffer texture than local varieties during storage. Undesirable varieties were also found, which softened during storage instead of hardening. Optimum texture of lafun dough was obtained after 5 h of storage.     

Robocast zirconia-toughened alumina scaffolds: Processing,structural characterisation and interaction with human primary osteoblasts

Zirconia-toughened alumina (ZTA) is the gold-standard ceramic in hip arthroplasty, but still lacks direct osseointegration and a metal shell, often coated with a bioactive layer, is currently required. The latter could potentially be replaced by a thinner, architectured ZTA layer, thereby allowing for larger acetabular components, with larger range of motion and lower dislocation risk. Robocasting may be an adequate technique to fabricate the architectured layer. Therefore, as a first step, this study aimed to produce ZTA scaffolds (3D-ZTA) by robocasting and assess their in vitro response. Shape retention was achieved by using a stable, well-dispersed, high solid loading ink injected in acid pH waterbath. 3D-ZTA exhibit regularly spaced microporous, rough struts and fully interconnected macroporosity. Human primary osteoblasts were homogenously distributed inside 3D-ZTA and showed increased osteogenic marker expression compared to 2D-ZTA control. Further work will focus on optimizing scaffold design to improve cell retention and extracellular matrix maturation.