A Special Structure in Al-Mg-Li Alloy (01420) Weld Metal

A large quantity of laminated fine grain zones were observed in the Al-Mg-Li alloy weld metal by manual TIG, which was not found in ordinary Al alloy welds. The fine grain zone is formed because of the Al3(Zr,Ti) particles in the filler metal and the manual filling of filler metal in welding process     

分子振动态及其跃迁的激光相干控制

讨论了激光合成相干叠加态的原理及其性质 ,针对 XY2 型分子 ,证明了合成局域模振动的可行性 ,然后给出相干叠加态的跃迁几率特征 ,发现它仍表现出相干的特性 ,对之进行分析研究表明 ,分子的振动态具有可控性 ,态跃迁几率具有可控性。     

铅锌选矿厂废水回用研究

简述了铅锌选厂废水回用小型试验及工业试验情况，在基本上不改变工艺结构基础上改变药剂制度达到废水回用的目的，使选矿废水回用率达到80％，实现尾矿库废水零排放。     

VITAMIN C AND β-CAROTENE IN FRESH AND FROZEN GREEN BEANS AND BROCCOLI IN A SIMULATED SYSTEM

The reduced ascorbic acid and β-carotene contents of “retail market-fresh” (RMF) and “fresh-frozen” (FF) green beans and broccoli in a simulated handling system were determined. Changes in ascorbic acid content in the two vegetables during a retail market period and frozen storage followed different patterns. In green beans, ascorbic acid content decreased during refrigerated storage for up to 7 days, but in broccoli there was a significant increase. Blanching resulted in a loss of approximately 40% of the ascorbic acid in broccoli. Ascorbic acid content of FF green beans stored at-20C for 16 weeks was approximately twice that in RMF green beans, but in FF broccoli stored under the same conditions it was only about half that of RMF broccoli. β-carotene content of green beans and broccoli did not change during either the retail market simulation of frozen storage and did not differ from that of fresh.     

预应力混凝土箱梁主要裂缝成因和防治措施的探讨

预应力混凝土连续箱梁的裂缝问题一直以来倍受桥梁界专家及技术人员的关注。本文通过对预应力混凝土连续箱梁主要裂缝产生的原因进行了浅析，并提出了相应的防治的措施。     

掺Tb_2O_3法拉第旋转玻璃

本文研究了掺Tb_2O_3的法拉第旋转玻璃的组成、物理化学性质及制备技术,实验结果表明维尔德常数V随着Tb_2O_3浓度的增大而增大,硼硅酸盐玻璃中Tb_2O_3含量大于20％(mol)时,维尔德常数可以达到-0.0030min/A/m·cm,从熔制试验结果0.5L铂坩埚可以获得质量较好的φ50×25mm的样品。     

抓好六个环节提高高校本科生毕业设计(论文)质量

本科毕业设计(论文)是本科生在校学习的最后一环,是对学生四年专业学习的一次检验,是向外界展示学校办学质量和办学特色的一种方式。本文从六个方面对如何提高本科毕业论文(设计)质量作了深入探讨。     

聚酯－聚醚嵌段共聚物的合成及抗静电性能研究

研究和分析了ＰＥＧ分子量、加料次序、反应时间和温度、物料比例、分散剂和固相缩聚等因素对ＰＥＴ－ＰＥＧ嵌段共聚物分子量和耐水性的影响。合成的嵌段共聚酯醚与ＰＥＴ共混纺丝可以显著改善ＰＥＴ纤维的抗静电性能。