首页 | 本学科首页   官方微博 | 高级检索  
文章检索
  按 检索   检索词:      
出版年份:   被引次数:   他引次数: 提示:输入*表示无穷大
  收费全文   16253篇
  免费   1740篇
  国内免费   2235篇
电工技术   275篇
技术理论   2篇
综合类   814篇
化学工业   1452篇
金属工艺   2904篇
机械仪表   1092篇
建筑科学   455篇
矿业工程   1406篇
能源动力   439篇
轻工业   57篇
水利工程   42篇
石油天然气   79篇
武器工业   67篇
无线电   731篇
一般工业技术   2367篇
冶金工业   3373篇
原子能技术   28篇
自动化技术   4645篇
  2024年   20篇
  2023年   543篇
  2022年   770篇
  2021年   750篇
  2020年   827篇
  2019年   786篇
  2018年   708篇
  2017年   736篇
  2016年   816篇
  2015年   727篇
  2014年   1042篇
  2013年   1294篇
  2012年   1546篇
  2011年   1458篇
  2010年   1118篇
  2009年   1393篇
  2008年   814篇
  2007年   1148篇
  2006年   1015篇
  2005年   428篇
  2004年   212篇
  2003年   156篇
  2002年   167篇
  2001年   127篇
  2000年   207篇
  1999年   240篇
  1998年   269篇
  1997年   213篇
  1996年   199篇
  1995年   162篇
  1994年   97篇
  1993年   41篇
  1992年   15篇
  1991年   12篇
  1990年   15篇
  1989年   11篇
  1988年   16篇
  1987年   10篇
  1986年   16篇
  1985年   8篇
  1984年   12篇
  1983年   9篇
  1982年   6篇
  1980年   11篇
  1978年   6篇
  1977年   7篇
  1976年   6篇
  1975年   5篇
  1973年   7篇
  1972年   8篇
排序方式: 共有10000条查询结果,搜索用时 15 毫秒
1.
《Ceramics International》2021,47(23):33106-33119
K9 optical glass is one of the typical components in optical systems. However, because of its poor fracture resistance, it is difficult to polish it with ultra-precision and high-efficiency and without any surface damage simultaneously. The emergence of the obliquely axial ultrasonic vibration-assisted polishing (UVAP) method can solve this problem which encounters in polishing efficiency and shape accuracy. However, due to the unclear material removal profile (MRP) mechanism, obliquely axial UVAP is not widely used in the processing field. This paper introduces the obliquely axial UVAP method in research processes, mainly focusing on the fixed point MRP analysis of the obliquely axial UVAP. Based on Hertz's contact theory, polishing pressure, the length of the semi-long axis (LLA) and the length of the semi-short axis (LSA) of the contact area are calculated under ultrasonic vibration conditions. Meanwhile, the relative linear velocity distribution of the oblique polishing tool in the instantaneous contact area is modeled by mathematical geometry method. A novel model of the MRP distribution for obliquely axial UVAP is proposed following the Preston equation. Subsequently, a series of polishing experiments were carried out to verify this model. The results show that the numerical model has good agreement with the experimental results on MRP, LLA, LSA, material removal depth and material removal rate (MRR). In addition, the material removal capability can be significantly improved by larger ultrasonic amplitude and larger oblique angle. This model not only more clearly elucidates the processing mechanism of obliquely axial UVAP, but also provides theoretical support for the polishing of free-form optical lenses.  相似文献   
2.
Refining ceramic microstructures to the nanometric range to minimize light scattering provides an interesting methodology for developing novel optical ceramic materials. In this work, we reported the fabrication and properties of a new nanocomposite optical ceramic of Gd2O3-MgO. The citric acid sol-gel combustion method was adopted to fabricate Gd2O3-MgO nanocomposites with fine-grain sizes, dense microstructures and homogeneous phase domains. Nanopowders with low agglomeration and improved sinterability can be obtained by elaborating Φ values. Further refining of the microstructure of the nanocomposites was achieved by elaborating the hot-pressing conditions. The sample sintered at 65 MPa and 1300 °C showed a quite high hardness value of 14.3 ± 0.2 GPa, a high transmittance of 80.3 %–84.7 % over the 3?6 μm wavelength range, due mainly to its extremely fine-grain size of Gd2O3 and MgO (93 and 78 nm, respectively) and high density.  相似文献   
3.
通过硬度、拉伸、冲击测试,以及光学显微镜(OM)、扫描电镜(SEM)等分析手段研究了C64钢在不同温度淬火过程中的显微组织和力学性能的变化。结果表明:当淬火温度低于950 ℃时,C64试验钢的显微组织中板条马氏体较为细小;当温度高于950 ℃时,板条马氏体急剧长大。随着淬火温度的升高,碳化物开始逐渐溶解,950 ℃时几乎全部溶解。钢的强度、硬度随着淬火温度的升高呈现下降的趋势;钢的伸长率、断面收缩率、冲击吸收能量随着淬火温度的升高表现出先升高后下降的趋势,并在950 ℃时达到最大值。试验钢最佳淬火温度为950 ℃,能够获得组织均匀、细小的板条状马氏体组织。此时,试验钢的抗拉强度为1122 MPa,屈服强度为1106 MPa,伸长率为11.40%,断面收缩率为25.20%,冲击吸收能量为191.0 J,能达到强韧化的最佳匹配。  相似文献   
4.
An easy albeit quite effective deionization suspension treatment was adopted to alleviate the detrimental effects related to the hydrolysis of Y2O3 in an aqueous medium. Fabrication of highly transparent Y2O3 ceramics with a fine grain size via air pre-sintering and post–hot isostatic pressing (HIP) treatment without using any sintering additive was achieved using the treated suspensions. The hydrolysis issue of Y2O3 powder in an aqueous medium was effectively alleviated by using deionization treatment, and a well-dispersed suspension with a low concentration of dissolved Y3+ species was obtained. The dispersed suspensions were consolidated by the centrifugal casting method, and the green bodies derived from the suspension of 35.0 vol% solid loading showed an improved homogeneity with a relative density of 52.1%. Fully dense Y2O3 transparent ceramic with high transparency was obtained by pre-sintering consolidated green compacts at a low temperature of 1400°C for 16 h in air followed by a post-HIP treatment at 1550°C for 2 h under 200 MPa pressure. The sample had a fine average grain size of 690 nm. The in-line transmittance of the sample reached 83.3% and 81.8% at 1100 nm and 800 nm, respectively, very close to the theoretical values of Y2O3.  相似文献   
5.
本文在环氧涂料中添加玄武岩鳞片,提高其防腐蚀性能。针对玄武岩鳞片的团聚问题,通过机械力化学改性工艺,采用正硅酸四乙酯、HY-311型钛酸酯偶联剂、E-44型环氧树脂对玄武岩鳞片进行杂化包覆,结果表明,杂化包覆后玄武岩鳞片的沉降时间从2h提高至96 h。杂化包覆玄武岩鳞片添加量为20%涂层的性能最优,附着力为13.40 MPa,耐盐雾时间为2000 h,在3.5%NaCl溶液中浸泡2000 h后,0.01 Hz的阻抗模值仍然有5.15×109 Ω·cm2。  相似文献   
6.
研究了不同Sn含量流变铸造AZ91合金的组织演化、拉伸行为及磨损性能。结果表明:Sn的合金化改变了Al在镁基体中的固溶度,并且显著细化了微观组织。加入0.8%(质量分数,下同)的Sn后,合金平均晶粒尺寸从105.0 μm降至42.1 μm。高熔点的金属间化合物为析出相提供了异质形核点,这些弥散析出的第二相在流变凝固过程中有效地细化了镁基体。弥散分布的第二相抑制了枝晶组织生长,从而进一步提升了合金的力学性能。随着Sn含量的增加,合金磨损率显著降低,磨粒磨损逐渐消失。3.0%Sn合金化的流变铸造AZ91合金具有最高的抗拉伸强度以及最好的耐磨损性能。  相似文献   
7.
当前配网面临着大规模分布式电源及多类型储能分散接入的情形,为配网系统的优化管控带来了极大的复杂性。基于分层优化、分区协同的思想,提出了一种区域内自治、区域间协调的配网分层优化体系,以达到大规模分布式电源并网后系统优化运行的目的。在优化调度层中,以各区域与主网交换功率的可调度性为目标建立动态数学模型,通过区域间协同优化实现大规模分布式电源友好并网,得到区域的整点功率交换指令。在区域内控制层中,考虑到不同分布式电源调节能力的差异性,结合储能系统基于模糊策略响应并修正上一级的整点指令,并给出各区域5 min超短期调度指令。在设备级控制中,基于PWM变流器对各储能系统进行实时控制以响应上一级的指令。最后基于算例仿真计算对所提方案进行了验证。  相似文献   
8.
采用粉末冶金法制备Zn-Mg-Ag合金,研究Ag含量对合金显微组织、抗压强度、耐腐蚀性能和抗菌性能的影响。结果表明,当Ag质量分数从0.5%增加2.0%时,Zn-Mg-Ag三元合金中MgZn2相含量增加,烧结密度降低,抗压强度先提高而后降低。随Ag含量增加,合金自腐蚀电位略有降低,但是维钝电流密度明显增高,表现出较大的降解速率和失重;在人工模拟体液中腐蚀浸泡14天后,合金表面有明显的腐蚀坑存在。当Ag质量分数从0.5%增加2.0%时,合金对金黄色葡萄球菌和大肠杆菌的抑菌圈直径分别增加15.0和5.8 mm,抗菌效果提高。  相似文献   
9.
研究了热轧工艺对65Mn钢组织与性能的影响。采用电子探针显微分析仪(EPMA)和透射电镜(TEM)对热轧组织进行了表征。结果表明:通过控制热轧工艺,可获得珠光体和贝氏体两种初始组织。随着终轧温度和终冷温度的降低,先共析铁素体含量和珠光体体片层间距逐渐减小,强度、硬度逐渐升高。相比珠光体组织,热轧贝氏体组织具有更高的强度,抗拉和屈服强度分别为943 MPa 和648 MPa。  相似文献   
10.
刘艺  李国喜  郑毅然 《表面技术》2021,50(9):286-292
目的 研究稀土Y对热浸镀铝层的影响,提高热浸镀铝件的耐蚀性能.方法 通过向热浸镀铝液中添加不同量的铝钇合金,获得稀土Y含量不同的热浸镀铝件.选用3.5%的NaCl溶液为腐蚀溶液,利用SEM、EDS观测其形貌、成分,并使用电化学测试和全浸试验研究稀土Y对镀层耐蚀性能的影响.结果 当添加0.2%Y时,热浸镀铝层表面平整、无孔洞,针状相细小,镀铝层减薄,过渡层由锯齿状转变为连续带状.稀土Y的添加使镀铝件的自腐蚀电位正移,自腐蚀电流密度减小,添加量为0.2%时,自腐蚀电位最正,为?0.7857 V,自腐蚀电流密度最小,为1.3505×10?8 A/cm2.与添加其他稀土元素相比,添加0.2%Y时,镀层的破裂电位Eb最正,为?0.6957 V.不同稀土含量的热浸镀铝件的交流阻抗谱都为单一的容抗弧,当稀土Y添加量为0.2%时,容抗弧半径最大.全浸试验中,添加0.2%Y的镀件的腐蚀速率最低.结论 稀土Y的添加可以使热浸铝层光滑、连续,且具有提高其耐腐蚀性的作用.Y添加量为0.2%时,镀铝件的耐蚀性最好.  相似文献   
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号