建筑电气设计中AutoCAD二次开发的研究

基于AutoCAD的二次开发环境下,建立幻灯片库,在AutoCAD本身所包含的程序帮助下,将已建好的幻灯片库嵌入到AutoCAD用户专用下拉菜单中.给设计者创造属于自己的开发环境,使AutoCAD在建筑电气设计中的使用更加灵活,极大的提高设计效率.     

Modelling of heat transfer in an infiltrated granular bed in view of the difference of phase temperatures

Physically substantiated boundary conditions for problems of heat transfer in infiltrated granular beds based on the two-temperature model which allow for the absence of interphase heat transfer on boundaries are formulated. It is shown that classical Dankwerts conditions would be applicable for gas. The problem of porous cooling at the boundary conditions of the 2nd and 3rd kind on the outer boundary is solved in a new formulation.     

一个面向语义的解释器自动生成技术

本文给出从指称语义自动生成解释器后端的一种技术.解释器被表示成PASCAL_like形式.     

Analysis of the detectivity for triple-layer heterojunction GaSb/GaInAsSb infrared detectors

In this paper, the detectivity is calculated and analyzed with the front-or backside illuminated case for both N-GaSb/p₂-Ga_0.8In_0.2As_0.19Sb_0.81/p₁-Ga_0.9In_0.1As_0.09Sb_0.91 and N₁-GaSb/n₂-Ga_0.9In_0.1As_0.09Sb_0.91/p-Ga_0.8In_0.2As_0.19Sb_0.81 infrared photovoltaic detectors, respectively. The analysis results show that the main absorption appears in the p-type Ga_0.8In_0.2As_0.19Sb_0.81 material with either front- or backside illuminated case for above two structures. In each structure, the carrier concentration obviously affects the detectivity. The carrier concentration in the wide-bandgap material for the isotype heterojunction should be reduced as low as possible to reduce the tunneling rate at the isotype heterointerface. Moreover, the change of the detectivity with the p-side surface recombination velocity for the N₁-n₂-p structure is more sensitive than that with the p₁-side surface recombination velocity for the N-p₂-p₁ structure. In the N-p₂-p₁ structure with the incident light from the p₁-side surface, two-color detection is achieved.     

Experiments and simulations of the mechanical performance of repaired panels

Firstly, the compress experiment is undertaken to investigate the efficiency of repaired panels in this paper, and then modeling of the mechanical behavior of the repaired composite panel under compressive static load is conducted by using of the finite element method. The effect of geometric non-linearity on the stress–strain response is considered in the numeric analysis. Fatherly, the user material subroutine (UMAT) is integrated with the ABAQUS package with the geometric non-linearity effect for studying the damage initiation and its progression in the composite structure, and quadrilateral, linear, thick shell elements (S8R) are adopted. Finally, the predicted strain distribution, damage evolution and strength of the laminate are compared with the test results.     

水电站坝下尾水渠集鱼流场模拟研究

为减缓大坝阻隔对鱼类洄游的不利影响,水电工程需要建设有效的过鱼设施疏通其洄游通道。高寒区高坝大库工程过鱼设施建设是一个极其复杂的技术问题,目前国内类似工程尚无成功运用经验。实际过鱼设施内流场条件十分复杂,会产生不利于鱼类上溯的水流形态。基于此原因,对某水电站工程坝下尾水流场进行了数值模拟。研究表明,在机组运行时,电站尾水渠左右两侧发电尾水主流的边缘是明显具有流速梯度分布的区域,符合鱼类聚集的水流特征,具备布置鱼道进口条件。这样可根据尾水位的变化开启两侧不同进口诱鱼,且在机组停运时,可开启左侧进口诱鱼。     

太阳辐照绝对辐射计的精密温度控制系统设计

为了提高太阳辐照绝对辐射计(SIARs)的测量精度,消除温度变化对SIARs测量精度的影响,研究设计了精密温度控制系统,对SIARs进行恒温控制;通过对铂电阻温度传感器自热效应的弱化,提高了温度测量的精度;提出了一种新的复合PID控制算法,该复合控制算法使系统获得良好的动态和稳态性能;使用密闭的高低温箱来模拟星上温度条件对系统进行了实验测试,实验数据表明,系统控制精度在0.1℃以内,可为SIARs工作提供稳定的温度环境。     

吉林省廉租住房管理研究

从吉林省廉租住房制度存在的问题入手,针对廉租住房制度存在的问题提出廉租住房建设的对策设计方法。希望通过对吉林省廉租住房研究,能够对其他老工业基地的廉租住房建设提供有益的借鉴作用。     

混合交通下右转机动车信号配时方法

为了减少右转机动车与直行自行车之间的干扰,提高交叉口的运行效率,本文分析了两相位信号控制交叉口右转机动车与自行车之间的冲突规律以及自行车交通流的行驶特性,确定设置右转机动车信号的直行自行车流量临界值.以减少冲突和提高交叉口运行效率为目标,确定右转机动车相位绿灯起亮时刻和绿灯时长,并建立了相应的参数标定模型.以实际调查数据为基础,应用VISSIM模拟软件进行模拟验证,结果表明,设置右转机动车信号后,右转机动车延误和机非冲突明显减少.