基于CDEGS软件设计的下水库接地网改造

本文利用CDEGS软件,对天荒坪抽水蓄能电站水库区域的土壤及岩石等地质参数进行分析和拟合,并构建土壤的分层模型;然后通过对地网的网格大小、导体的疏密程度、接地网的面积、水平接地体的长度等因素进行经济比较和优化分析,设计出了符合安全标准的水下接地网。结果表明:水下接地网的设计满足设计要求,达到了改善接地网参数性能的目标。     

Statistics of ceramic strength: Use ordinary Weibull distribution function or Weibull statistical fracture theory?

“Weibull statistics” for strength distribution analysis refers to either the ordinary Weibull distribution function or the Weibull statistical fracture theory. The ordinary Weibull distribution function is an empirical distribution function on an equal footing with other type of classical empirical distributions such as normal and log-normal distributions for fitting the statistical data of various random variables nonexclusive to materials strength. It has no explicit physical meaning and cannot be used for size scaling and prediction of strength. The Weibull statistical fracture theory is a weakest-link statistical fracture model for a solid with the strength distribution of an elemental volume being described by the ordinary Weibull distribution function. It has the capability of size scaling and prediction of strength for specimens with different geometries and different loading modes. The three-parameter Weibull statistical fracture theory in uniaxial flexure of prismatic beams is reformulated and validated by both numerical and real strength experiments of different ceramics.     

内嵌纳凝胶阴离子交换聚甲基丙烯酸羟乙酯复合晶胶分离苯乳酸研究

采用超声乳化聚合法制备了聚甲基丙烯酸丁酯纳凝胶，然后经结晶致孔法制备了内嵌纳凝胶的甲基丙烯酸羟乙酯纳晶胶，对其接枝功能单体N，N，N-三甲基乙烯基苯甲氯化铵，得到内嵌纳凝胶阴离子交换纳晶胶，用于从发酵液中分离苯乳酸。结果表明：所得纳晶胶具有良好的渗透性能和轴向分散性能，在流速为1 cm·min^-1时，不同配比纳晶胶对牛血清白蛋白的吸附容量为3.9~5.4 mg·ml^-1；将质量比为 8∶2（HEMA∶pBMA）的纳晶胶用于从转化液中分离苯乳酸，所得苯乳酸的纯度达89.24%，回收率93.74%，分离效果好，表明其在生物分离方面有良好的应用前景。     

Polyimide/nano-TiO2 hybrid films having benzoxazole pendent groups: In situ sol–gel preparation and evaluation of properties

Polyimide/titania (PI/TiO₂) nanocomposite films have been successfully fabricated through the in situ formation of TiO₂ within a PI matrix via sol–gel method. Poly(amic acid) (PAA), which is the precursor of PI, was successfully synthesized by mixing pyromellitic dianhydride (PMDA), with equimolar amount of a diamine monomer having a pendent benzoxazole unit and two flexible ether linkages in N,N-dimethylformamide (DMF) solvent. Tetraethyl orthotitanate [Ti(OEt)₄] and acetylacetone were then added to the resulted PAA. After imidization at high temperature, PI/TiO₂ hybrid films were formed. The structure and morphology of the hybrid nanocomposites with different titania contents (0 wt%, 5 wt%, 10 wt%, and 15 wt%) were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, and transmission electron microscopy. The results indicate that the TiO₂ nanoparticles were homogeneously dispersed in the hybrid films. The thermogravimetric analysis of nanocomposites confirms the improvement in the thermal stability with the increase in the percentage of titania nanoparticle. Transmission electron microscopy showed that the nanoparticles with an average diameter of 25–40 nm were dispersed in the polymer matrix.     

Pt-WC/Mnt三元纳米复合材料的制备及其电催化性能

以剥离后的蒙脱石(Mnt)片层为载体、六氯化钨(WCl6)为钨源,通过浸渍负载及原位还原碳化获得了碳化钨(WC)与蒙脱石(Mnt)纳米复合材料,然后将氯铂酸(H2PtCl6)通过浸渍负载于复合材料上,并在氢气(H2)中还原得到Pt-WC/Mnt三元纳米复合催化材料。采用X射线粉末衍射和透射电子显微镜对三元纳米复合催化材料的物相、形貌和结构进行表征,采用三电极体系和循环伏安法测试了样品的电催化性能。结果表明:样品物相主要为WO3和WC,蒙脱石片层结构明显,铂(Pt)纳米粒子均匀分布于WC/Mnt复合材料的外表面。Pt-WC/Mnt三元纳米复合材料对甲醇电催化氧化具有较高的催化活性,并且在酸碱体系中均具有良好的稳定性。     

复合材料的制备及其温敏性能研究

采用高能球磨法及热压成型工艺制备了铜基温敏复合材料。通过高分辨透射电镜(TEM)等分析手段对该复合材料的微观形貌特征和结构进行了分析研究,并探讨了球磨时间对复合材料微观形貌特征和热敏性的影响。     

Oxidative removal of bisphenol A using zero valent aluminum-acid system

Bisphenol A (BPA), a controversial endocrine disruptor, is ubiquitous in the aquatic environment. In this study, the oxidative degradation of BPA and its mechanism using zero valent aluminum (ZVAl)-acid system under air-equilibrated conditions was investigated. Under pH <3.5 acidic conditions, ZVAl demonstrated an excellent capacity to remove BPA. More than 75% of BPA was eliminated within 12 h in pH 1.5 reaction solutions initially containing 4.0 g/L aluminum and 2.0 mg/L BPA at 25 ± 1 °C. The removal of BPA was further accelerated with increasing aluminum loadings. Higher temperature and lower initial pH also facilitated BPA removal. The addition of Fe²⁺ into the ZVAl-acid system significantly accelerated the reaction likely due to the enhancing transformation of H₂O₂ to HO via Fenton reaction. Furthermore, the primary products or intermediates including monohydroxylated BPA, hydroquinone, 2-(4-hydroxyphenyl)propane and 4-isopropenylphenol, were identified and a possible reaction scheme was proposed. The remarkable capacity of the ZVAl-acid system in removing BPA displays its potential application in the treatment of organic compound-contaminated water.