Preparation,physicochemical characterization and release behavior of the inclusion complex of trans-anethole and β-cyclodextrin

Trans-anethole (AT) has a variety of antimicrobial properties and is widely used as food functional ingredient. However, the applications of AT are limited due to its low water solubility, strong odor and low physicochemical stability. Therefore, the aim of this work was to encapsulate AT with β-cyclodextrin (β-CD) for obtaining inclusion complex by co-precipitation method. The measurements effectively confirmed the formation of inclusion complex between AT and β-CD. The results showed that the inclusion complex presented new solid crystalline phases and was more thermally stable than the physical mixture and β-CD. The phase solubility study showed that the aqueous solubility of AT was increased by being included in β-CD. The calculated stability constant of inclusion complex was 1195 M^− 1, indicating the strong interaction between AT and β-CD. Furthermore, the release study suggested that β-CD provided the protection for AT against evaporation. The release behavior of AT from the inclusion complex was controlled.     

Iterative equalization combining algorithm in intersymbol interference channel

To realize joint optimization of spatial diversity and equalization combining in the intersymbol interference (ISI) channel, an iterative equalization combining algorithm is proposed. The proposed algorithm uses the coefficients of Turbo equalization to calculate the combination weights without estimating the signal to noise ratio in each diversity branch. The equalized symbols from different diversity branches are combined, and the extrinsic information output from the decoder is fed back to the equalizers, so as to exchange soft information between the equalizers and the decoder. The performance of the proposed algorithm is analyzed using the extrinsic information transfer (EXIT) chart and verified by simulations. Results show that our approach fully exploits time domain information from the multipath channel and spatial domain information from multi receiving antennas, which efficiently improve the performance of the receiver in the severe ISI channel.     

A mixed collector system for phosphate flotation

Flotation has been used in industry for more than a half century as the primary technique for upgrading phosphate. While the flotation of phosphate was inefficient when oleic acid was used alone as a collector, therefore a mixed collector of oleic acid (HOl), linoleic acid (LA) and linolenic acid (LNA) was employed to improve the recovery of phosphate flotation. The batch flotation results showed that the optimal composition of the mixed collector was 54 wt.% HOl, 36 wt.% LA and 10 wt.% LNA. Additionally, the effect of pH on the mixed collector application was studied while considering the surface tension, contact angle and micro-flotation. The results showed that the mixed collector should be used at a pH of 9.5. Above a pH of 9.5, the adsorption of fatty acids dimers on the apatite surface hindered phosphate flotation. The influence of the mixed collector assembly on apatite flotation was also investigated. It was demonstrated that due to its low critical micelle concentration, a sufficiently hydrophobic apatite surface could be generated at a collector concentration of 60 mg/L. In addition, zeta potential experiments suggested that collector adsorption was governed by chemisorption. FTIR and XPS spectra studies further indicated that the chemical reaction involved the carboxyl groups of fatty acids and Ca species at the apatite surface for each fatty acid in the mixed collector.     

Use of conditioning time to investigate the mechanisms of interactions of selected fatty acids on hematite Part II laboratory investigations

It is the aim of this paper to examine the effects of conditioning time on the flotation of hematite using three technical grade fatty acid reagents as providing additional evidence on their mechanism of interaction with the hematite surface. Various mechanisms have been postulated as occurring as conditioning time is increased. Both physical (e.g. conditioning time and power input) and chemical (nature, dispersion and solubility of the adsorbing species) contribute to the mechanisms of attachment of collector. In this paper, the mechanism of attachment of oleate to hematite can be readily explained by chemisorption, but the mechanism of attachment of lauric acid appears to be physical adsorption at neutral pH. The flotation of hematite with a mixture of tallow-type fatty acids (palmitic, stearic and oleic acids) is very sensitive to conditioning time, and suggests that, even though flotation is very effective at short conditioning times, it is very susceptible to the presence of fines and their associated high surface areas. It is therefore obvious that both the physical and chemical conditions contribute to the mechanisms of adsorption of fatty acids on iron-containing oxide minerals and must be understood in order to optimise the flotation of these minerals in an industrial situation.     

Synthesis and properties of cinnamic acid series organic UV ray absorbents–interleaved layered double hydroxides

Organic ultraviolet (UV) ray absorbents, cinnamic acid (CA) and p-methoxycinnamic acid (PMOCA) were intercalated into Zn₂Al layered double hydroxides (Zn₂Al-LDHs) by co-precipitation reaction. The organic–inorganic nanocomposites, Zn₂Al-LDH/CA and Zn₂Al-LDH/PMOCA were obtained. The samples showed excellent UV ray absorption ability and their catalytic activity for the air oxidation of castor oil greatly decreased when the organic UV ray absorbents were intercalated in the layers of the Zn₂Al-LDHs. The studies suggested that Zn₂Al-LDH/organic UV absorbent nanocomposites might be used as safe sunscreen materials.     

聚丙烯酸酯防水乳液的研究进展

综述了聚丙烯酸酯防水乳液的理论研究进展，重点评述了组合功能单体、优选乳化体系和进行粒子设计三方面的改性手段。     

A Newly Developed Non, Destructive Tritium Measurement Technique and Its Application to V-4Cr-4Ti Alloy

A non-destructive and in-situ technique for the measurement of tritium in materials, namely β-ray-induced X-ray spectrometry （BIXS）, has been developed recently. In the present study a V-4Cr-4Ti alloy was pre-heated at 1000℃ for 2 h to form a recrystallization structure before the tritium absorption experiments were conducted. Firstly the hydrogen isotope gas was charazterized by means of a quadrupole mass spectrometer （QMS） and a small-sized ionization chamber. Then hydrogen isotope absorption tests of V-4Cr-4Ti alloy were performed at 400 ℃ and the atomic concentration of hydrogen isotope in V-4Cr-4Ti alloy was estimated as 0.17% with a tritium content of approximately 2.5 ppm. Experimental results indicate that BIXS is a quite useful tool for quantitatively measuring the tritium content and tritium distribution in the surface layers of vanadium alloys and no strong trapping effects of tritium exist in the pre-heated V-4Cr-4Ti alloy.     

Design of the ECRH/ECCD Launcher System for HL-2A Tokamak

An ECRH/ECCD system with two 68GHz/500kW/1S gyrotrons will be built up in HL-2A tokamak. The location of the Gaussian beam waist is 580 mm away from the center of the plasmas and the beam radius is 37 mm at the center of the plasmas. Compared to the minor plasma radius （420 mm）, it is small enough for localized control. The launcher system covers a wide toroidal and poloidal steering range by the two steering plane mirrors. Therefore it is possible to explore the on- and off-axis heating over half of the plasma minor cross section and the co-current drive.     

Balancing energy and environment: The effect and perspective of management instruments in China

The rapid growth of Chinese economy has tremendously stimulated the expansion of energy consumption. The structure of energy consumption in China is featured with the coal domination. Air pollution is becoming increasingly severe. As a result, we are confronted with the extremely arduous task to balance energy consumption and environmental protection. In order to coordinate the relationship between energy consumption and environmental protection in a strategic way, this paper analyzes comprehensively the instruments, effects and perspectives of energy-related environmental management. Meanwhile, this paper illustrates the barriers and challenges facing the energy and energy-related environmental management in China, and suggests a priority strategy of management instrument, mainly composed of energy-saving, optimization of energy structure, promulgation of environmental standards, advance in environmental technologies, internalization of environmental costs, establishment of a public benefit fund and adoption of a Renewable Portfolio System.     

基于AROP程序包的类Landsat遥感影像配准与正射纠正试验和精度分析

遥感影像的精确配准和正射纠正是进行图像融合、变化检测、图像镶嵌、定量遥感建模、多时相和多传感器影像协同应用的基础和前提。以美国国家航空和航天管理局下设LEDAPS(Landsat Ecosystem Disturbance Adaptive Processing System)课题组开发的配准与正射纠正程序包AROP(Automated Registration and Orthorectification Package)为例,详细阐述了其配准的原理与程序设计流程,并对其配准的精度进行了分析和评价。试验表明:AROP程序包算法能够找出足够的控制点,且控制点分布较为均匀,配准误差小于0.5个像元。误差特征表现为:扫描误差明显大于航向误差,误差的结果与影像漂移、DEM、坡度存在一定的相关性,高程和坡度是影响配准精度的主要因素之一。该程序包目前能够用于对我国CBERS影像的正射校正以及波段不匹配处理,但是对HJ卫星CCD影像数据配准还有待于进一步研究。