Optimised phase compositions and improved microwave dielectric properties based on calcium tin silicates

The Ca_(1+2y)Sn_(1-x)Si_(1+y)O_(5-2x+4y) low-permittivity microwave dielectric ceramics were prepared through solid-state reaction at 1350–1450 °C for 5 h. The relations between microwave dielectric properties and phase compositions for non-stoichiometric Ca_(1+2y)Sn_(1-x)Si_(1+y)O_(5-2x+4y) ceramics have been investigated. A single CaSnSiO₅ phase with abnormally positive temperature coefficient of resonant frequency (τ_f = + 62.5 ppm/°C) was synthesised at 1450 °C. This composition was an effective τ_f compensator of CaSiO₃ and Ca₃SnSi₂O₉ phases with typically negative τ_f value. The CaSiO₃ second phase was related to the Sn deficiency in the CaSn_(1-x)SiO_(5-2x) (0 < x < 1.0) composition, whereas the Ca₃SnSi₂O₉ second phase was obtained by controlling the Ca:Sn:Si ratios on the basis of the Ca_(1+2y)SnSi_(1+y)O_(5+4y) (0 < y < 1.0) composition. A promising low-permittivity millimetre-wave ceramic with most excellent microwave dielectric properties (ε_r = 10.2, Q×f = 81,000 GHz and τ_f = −4.8 ppm/°C) was produced from the Ca_(1+2y)SnSi_(1+y)O_(5+4y) (y = 0.4) ceramic.     

Inverse analyses of diffusion processes in type 13X zeolite particles

To determine effective surface self-diffusion coefficients of CO₂ within type 13X zeolite particles, at various temperatures (25–70 °C), inverse analyses of observed CO₂-uptake curves were successfully performed. The obtained effective surface self-diffusion coefficients increase with both the amount adsorbed and the temperature and ranged from 7.8 × 10⁻¹⁰ to 1.95 × 10⁻⁹ m²/s under the present experimental conditions.     

苦味酸钾点火药在电点火头中的应用

通过理论分析和试验,从机械感度、燃烧精度、热安定性、性能、长贮等方面,对比分析了苦味酸钾点火药与DDNP点火药.结果表明:在电点火头制造中,采用苦味酸钾作为点火药的主要组分,具有热稳定性好、药头机械强度高、生产过程废品少、无环境污染等优点,尤其有利于提高电雷管的发火可靠性和一致性.     

单孔护壁爆破数值模拟

运用LS-DYNA软件对单孔护壁爆破和切缝药包爆破进行了三维数值模拟,结果显示,由于PVC-U套管的存在,作用于孔壁的爆炸应力波峰值被显著削弱,降低率达到30%～46%,并推迟了其到达保留岩体孔壁时间.与传统的切缝药包爆破相比,保留岩体损伤更小.     

基于Sql Server BI平台和决策树技术的CET-4成绩分析

文章首先对Sql Server 2008商业智能平台及决策树技术相关理论作了介绍,然后对挖掘数据源数据进行了一系列预处理。利用Sql Server 2008商业智能平台下的决策树技术并采用数据挖掘扩展语言即DMX语言创建了CET-4成绩分析决策树模型。分类矩阵和挖掘提升图分别对该模型的评估结果表明了模型具有较高的可靠性和分类准确度,同时模型对应的一些规则可作为英语教学管理和改革的重要参考依据。     

基于山区地质灾害危险性分区的建设用地适宜性评价

地质灾害是建设用地选址时考虑的关键因素之一,也是危险性区划的主要参考要素,其直接或间接危害到人类安全并给社会和经济建设造成重大损失。为了降低建设用地规划中地质灾害的影响,应将地质灾害危险性分区考虑到建设用地适宜性评价当中。以干旱河谷山区丹巴县为研究区,运用确定系数和逻辑回归相结合的方法,构建地质灾害危险性评价体系对该区进行地质灾害危险性分区。选择安全因子、自然因子、社会因子和生态因子共同构成建设用地适宜性评价指标体系,利用层次分析法对研究区进行建设用地适宜性评价。结果表明:(1)对丹巴县进行危险性分区,极高危险区217.20km2,高危险区744.95km2,中度危险区1352.44km2,低度危险区1295.08km2以及极低危险区875.32km2。(2)丹巴县建设用地最适宜区面积为115.72km2,占县域总面积的2.57%,适宜建设的土地少且多集中在小金川、革什扎河、东谷河和大渡河沿岸河谷地区。较适宜区、基本适宜区、较不适宜区和禁止建设区面积分别为683.47km2、623.21km2、590.66km2、2494.21km2。(3)已建成的城镇空间中38.50%和37.62%分布在最适宜区和较适宜区,整体分布状况良好。有5.85%的城镇空间建设在较不适宜区,2.67%在禁止建设区,存在生态安全风险,该区域应加强灾害预警与防灾减灾工作,有条件地适度搬迁。     

Distributed patching for mobile wireless sensor networks

Mobile wireless sensor networks (MWSNs), the continuous movement of sensor nodes, may cause complete disconnection of the network or at best a part of it. The design of such networks should guarantee that all sensor nodes at all times have a path to the sink node(s). Prolonging the lifetimes of the MWSNs is a crucial design issue but should not be at the expense of other essential functions such as connectivity. In this paper, we propose an energy efficient distributed framework for connectivity maintenance of MWSNs. In the proposed framework, sensor nodes of the MWSNs schedule and control their radio frequency (RF) modules based on dynamic coordinated reconstruction mechanism, some senor nodes may lose their connectivity with the network due to mobility, depletion of energy and/or incurred faults. Two protocols are developed to patch up the disconnection of the MWSNs. The first protocol reestablishes the network connection consuming far less energy than state-of-the-art alternatives. However, it is capable of reestablishing the connection when no more than 20% of the MWSN backbone nodes lose connection concurrently. The second protocol extends this limit to operate when up to 35% of the MWSN backbone nodes lose connection simultaneously.     

LiCoO2材料的电化学制备及回收研究进展

LiCoO₂电池自商业化以来,在人们的生产和生活中发挥重要作用。电化学法具有简单、高效、环保等特点,被广泛应用于LiCoO₂材料的制备和回收。综述了电化学法制备和回收LiCoO₂材料的研究现状,重点阐述了电化学制备LiCoO₂材料的方法、原理及产物的电化学性能等,以期为电化学方法在制备和回收LiCoO₂材料领域的发展提供基础。     

MEMS气体流量传感器的简易流量测试装置

为了完成所研制的MEMS气体流量传感器样品的流量测试与标定,设计制作了一种由标准流量发生器和传感器信号读出与数据采集电路组成的简易流量测试装置。标准流量发生器由注射器和可更换的砝码组成,利用不同的砝码配重,在注射器出气口产生合适的恒定气体流速。通过理论分析和Ansys有限元数值仿真,验证了简易标准流量发生器的可行性。传感器信号读出与数据采集电路基于内建多路A/D转换器的单片机实现,具有传感器加热电阻器的恒温控制、流量信号的数字检测和显示的功能。采用该简易流量测试装置对自行研制的MEMS气体流量传感器进行了流量测试与标定,获得了待测器件的标定参数、传感器流量测量的绝对误差和相对误差。     

EVA／木质素薄膜的制备与性能研究

研究了经造粒、吹塑成膜的乙烯醋酸乙烯酯共聚物（EVA）／木质素共混物的结构、热性能以及力学性能。热重分析表明木质素与EVA共混物的热稳定性比单一组分的高；差示扫描量热分析表明木质素与EVA的相容性好；傅里叶红外光谱分析表明木质素与EVA之间存在分子间氢键相互作用；扫描电子显微分析表明木质素含量对共混物形貌有明显的影响；力学性能测试表明木质素含量在30％（质量分数，下同）以内，共混物薄膜仍具有较好的力学性能，随着木质素含量的增加，共混物力学性能降低。