One-dimensional GIS-based model compared with a two-dimensional model in urban floods simulation.

A GIS-based one-dimensional flood simulation model is presented and applied to the centre of the city of N?mes (Gard, France), for mapping flow depths or velocities in the streets network. The geometry of the one-dimensional elements is derived from the Digital Elevation Model (DEM). The flow is routed from one element to the next using the kinematic wave approximation. At the crossroads, the flows in the downstream branches are computed using a conceptual scheme. This scheme was previously designed to fit Y-shaped pipes junctions, and has been modified here to fit X-shaped crossroads. The results were compared with the results of a two-dimensional hydrodynamic model based on the full shallow water equations. The comparison shows that good agreements can be found in the steepest streets of the study zone, but differences may be important in the other streets. Some reasons that can explain the differences between the two models are given and some research possibilities are proposed.     

ANN inverse analysis based on stochastic small-sample training set simulation

A new approach of inverse analysis is proposed to obtain parameters of a computational model in order to achieve the best agreement with experimental data. The inverse analysis is based on the coupling of a stochastic simulation and an artificial neural network (ANN). The identification parameters play the role of basic random variables with a scatter reflecting the physical range of potential values. A novelty of the approach is the utilization of the efficient small-sample simulation method Latin Hypercube Sampling (LHS) used for the stochastic preparation of the training set utilized in training the artificial neural network. Once the network has been trained, it represents an approximation consequently utilized to solve the key task: To provide the best possible set of model parameters for the given experimental data. The efficiency of the approach is shown using numerical examples from civil engineering computational mechanics.     

Design of a retention tank: comparison of stormwater quality models with various levels of complexity.

Stormwater quality simulation models are useful tools for the design and management of sewer systems. Modelling results are highly sensitive to experimental data used for calibration. This sensitivity is examined for three modelling approaches of various complexities (site mean concentration approach, event mean concentration approach and build-up, washoff and transport modelling approach) applied to a typical case study (design of a dry detention tank), accounting for the variability of calibration data and their effect on simulation results. Calibrated models with different calibration data sets were used to simulate 3 years of rainfall with different retention tank specific volumes. Annual pollutant load interception efficiencies were determined. Simulations results revealed (i) that there is no advantage in using the EMC model compared to the SMC model and (ii) that the BWT model resulted in higher design ratios than those given by the SMC/hydraulic approach. For both EMC and BWT models, using an increasing number n of events for calibration leads to narrower confidence intervals for the design ratios. It is crucial for design ratios to account for successive storm events in chronological order and to account for the maximum allowable flow to be transferred to the downstream WWTP.     

Real-time limit analysis of vaulted masonry buildings

This paper presents new structural analysis tools based on limit state analysis for vaulted masonry buildings. Thrust lines are used to visualize the forces within the masonry and to predict possible collapse modes. The models are interactive and parametric to explore relationships between building geometry and possible equilibrium conditions in real time. Collapse analysis due to applied displacements is determined by combining kinematics and statics. The approach is largely two dimensional, though more complex three-dimensional problems are analyzed using the same methods. This paper presents a series of analytical tools that are fast and easy to use in real time, but at the same time rigorous and highly accurate. This work represents a significant improvement over traditional methods of thrust line analysis performed by hand, which are often tedious and time-consuming.     

High birefringence photonic bandgap fiber with elliptical air holes

In this paper, we proposed a high birefringence photonic bandgap fiber (PBGF) with elliptical air holes in cladding and circular air hole in core. The forbidden gaps of the honeycomb structure are calculated when the circular air holes are deformed to the elliptical shape. And the birefringence of the PBGFs is investigated by using a full-vector finite element method (FEM) and the numerical results are presented.     

Radiometric sensor for temperature control of food processing

This paper describes a novel planar antenna sensor created for the purpose of noninvasive temperature measurements using microwave radiometry. In order to improve radiometric measurements in industrial applications, a new generation of sensors is introduced, composed of a metallic sheet. Simulations based upon the method of moments is used both to design and to determine their electromagnetic performances. This paper also describes a radiometric device using these sensors to measure and control the temperature of food products during deep freezing processes. The results and discussions are presented.     

Simulation of humidity control and greenhouse temperature tracking in a growth chamber using a passive air conditioning unit

In this paper, we define a dynamic discrete model of a passive air conditioning unit, without the more typical compression or absorption-refrigeration cycle. The unit is composed of heat exchangers, a positioning system and humid corrugated pads. The aim of the study was to follow the temperature in a greenhouse and to replicate it with a desired and stable relative humidity in a ventilated growth chamber. A control law, based on a quadratic criterion and dynamic programming, taking output error and energy consumption minimisation into account, was used to control the behaviour of the unit in spite of air intake disturbances. The results of the simulation indicate that the air conditioning unit can produce a variable climate in the growth chamber, with a wide range of relative humidity setpoints.     

Measurement and Identification of the Parameters of SPICE-Models of a Bipolar Transistor

A method of measuring and identifying the static parameters of a bipolar transistor is considered. The characteristic of the transistor, from which the parameters of the model are determined, is chosen depending on what group the calculated parameters belong to. The characteristics are measured in such a way that the equations of the model describing them can be reduced to the simplest form.     

Velocity selective filters recursively implemented in the spatiotemporal domain.

Energy-based methods for motion estimation in image sequences process the input data either in the spatiotemporal or in the frequency domain. In both cases, the algorithms already described in the literature often require a huge number of elementary operations. In this paper, we describe a class of velocity selective filters which yield an accurate detection of the edges moving in the sequence. We first present a filtering scheme based on a convolution operation computed on a finite size neighborhood and describe its properties in the spatiotemporal and frequency domains. Then, we show that filters with similar properties can be implemented recursively, i.e., as convolutions computed on infinite-size neighborhoods. As an example, we finally show the filters' responses in the case of two superimposed translational motions.