Optimization of structural,electrical, and magnetic properties of ytterbium substituted W-type hexaferrite for multi-layer chip inductors

The rare earth (Yb³⁺) substituted W-type hexagonal ferrites with composition CaPb_2-xYb_xFe₁₆O₂₇ (x = 0.0, 0.5, 1.0, 1.5, 2.0) were synthesized by a facile and cost-effective sol-gel auto combustion method with post heat treatment. The synthesized hexagonal ferrites were characterized by a variety of analytical techniques, and an impedance analyzer was used to investigate the effects of Ytterbium on structural, magnetic, spectral and dielectric properties. The relationship between their impedance, structure and dielectric properties was investigated. The X-ray diffraction patterns verify the presence of single-phase W-type hexagonal ferrites. Physical properties such as D_bulk (bulk density), D_xrd (X-ray density), and P (porosity) of the CaPb_2-xYb_xFe₁₆O₂₇ W-type hexagonal ferrites were calculated. The bulk density of all the samples was decreased, and X-ray intensity was increased with the Ytterbium replacement in the W-type hexaferrite. By adding Yb³⁺ ions, the lattice parameters, cell volume and X-ray density were reduced due to the substitution of ytterbium with smaller ionic radii compared to the lead ion with large ionic radii. The AC-conductivity was increased from (1.523 × 10^?5 to 6.699 × 10^?5) Ωcm^?1. The dielectric constant and tangent loss was found to decrease substantially. The magnetic properties were found to enhance by the substitution of Yb³⁺. The low coercivity value of Yb³⁺ substituted W-type hexagonal ferrites are suitable for magnetic recording media operated at a high-frequency regime. The enhancement of electrical, dielectric and magnetic characteristics suggests these materials as promising for multi-layer chip inductors (MLCIs) circuit applications.     

Finite-time continuous extended state observers: design and experimental validation on electro-hydraulic systems✰

In this paper, a time-varying chattering-free observer for electro-hydraulic actuators able to provide finite-time estimations of the full state variables as well as uncertainties is presented. The key idea is to employ a positive-increasing function associated with the observer objectives to improve the convergence time performance. First, the model of an electro-hydraulic actuator as a case study for the proposed observer is presented. Then, an extended state observer is introduced, and the time-varying gains are provided to ensure that without neither any knowledge about the upper bounds of the uncertainties nor its derivative, the observation error dynamics is convergent to a neighborhood of zero in a finite time. Comparative simulations are presented to analyze the effectiveness of the proposed observers. Then, further simulations are performed in the presence of measurement noise. It is concluded that the proposed scheme can compete with other leading strategies, making it a qualified alternative approach in the observer design with noteworthy potential. Finally, the effectiveness of the proposed approach in real-life conditions is demonstrated through experimental studies.     

Frequency response data-based peak filter design applied to MIMO large-scale high-precision scan stage

A large-scale high-precision scan stage is important equipment in the industrial productions of micro-fabrication such as flat panel display (FPD) lithography systems. Designing controllers for multi-input multi-output (MIMO) systems is time-consuming and needs experience because of the interaction between each axis and many controller tuning parameters. The aim of this study is to develop a peak filter design method based on frequency response data to reduce repetitive disturbance. This data-based approach does not use the model and only uses the frequency response data of the controlled system and the disturbance spectrum calculated from the scanning error data (Contribution 1). The peak filter is designed by convex optimization and satisfies robust stability conditions for six-degree-of-freedom systems (Contribution 2). The control performance of the designed peak filter is experimentally demonstrated with an industrial MIMO large-scale high-precision scan stage in reducing the scanning error of the main stroke of the translation along the $x$-axis (Contribution 3).     

Predictive formulas for different measures of cheese yield using milk composition from individual goat samples

The objective of this study was to develop formulas based on milk composition of individual goat samples for predicting cheese yield (%CY) traits (fresh curd, milk solids, and water retained in the curd). The specific aims were to assess and quantify (1) the contribution of major milk components (fat, protein, and casein) and udder health indicators (lactose, somatic cell count, pH, and bacterial count) on %CY traits (fresh curd, milk solids, and water retained in the curd); (2) the cheese-making method; and (3) goat breed effects on prediction accuracy of the %CY formulas. The %CY traits were analyzed in duplicate from 600 goats, using an individual laboratory cheese-making procedure (9-MilCA method; 9 mL of milk per observation) for a total of 1,200 observations. Goats were reared in 36 herds and belonged to 6 breeds (Saanen, Murciano-Granadina, Camosciata delle Alpi, Maltese, Sarda, and Sarda Primitiva). Fresh %CY (%CY_CURD), total solids (%CY_SOLIDS), and water retained (%CY_WATER) in the curd were used as response variables. Single and multiple linear regression models were tested via different combinations of standard milk components (fat, protein, casein) and indirect udder health indicators (UHI; lactose, somatic cell count, pH, and bacterial count). The 2 %CY observations within animal were averaged, and a cross-validation (CrV) scheme was adopted, in which 80% of observations were randomly assigned to the calibration (CAL) set and 20% to the validation (VAL) set. The procedure was repeated 10 times to account for sampling variability. Further, the model presenting the best prediction accuracy in CrV (i.e., comprehensive formula) was used in a secondary analysis to assess the accuracy of the %CY predictive formulas as part of the laboratory cheese-making procedure (within-animal validation, WAV), in which the first %CY observation within animal was assigned to CAL, and the second to the VAL set. Finally, a stratified CrV (SCrV) was adopted to assess the %CY traits prediction accuracy across goat breeds, again using the best model, in which 5 breeds were included in CAL and the remaining one in the VAL set. Fitting statistics of the formulas were assessed by coefficient of determination of validation (R²_VAL) and the root mean square error of validation (RMSE_VAL). In CrV, the formula with the best prediction accuracy for all %CY traits included fat, casein, and UHI (R²_VAL = 0.65, 0.96, and 0.23 for %CY_CURD, %CY_SOLIDS, and %CY_WATER, respectively). The WAV procedure showed R²_VAL higher than those obtained in CrV, evidencing a low effect of the 9-MilCA method and, indirectly, its high repeatability. In the SCrV, large differences for %CY_CURD and %CY_WATER among breeds evidenced that the breed is a fundamental factor to consider in %CY predictive formulas. These results may be useful to monitor milk composition and quantify the influence of milk traits in the composite selection indices of specific breeds, and for the direct genetic improvement of cheese production.     

Italian translation,validation, and repeatability of Standard Patient Evaluation of Eye Dryness (SPEED) Questionnaire

PurposeThe assessment of symptoms of dry eye disease using a questionnaire is an effective and simple method of quantifying symptoms. The aim of this study was to translate the SPEED questionnaire and adapt it for the Italian language and verify the main psychometric performance of the translated version, including repeatability and agreement.MethodsThe SPEED questionnaire was translated into Italian following a standard methodology. The resulting questionnaire was administered to 206 adult participants in order to perform a validation analysis. A subgroup of 82 participants was retested after one week to give a repeatability and agreement assessment.ResultsInternal consistency showed an alpha of 0.852 (95% CI 0.818–0.881) and no unnecessary items. The factor analysis showed a saturation for three main factors related to (i) Dryness and Soreness, (ii) Fatigue, and (iii) Burning. Repeatability was high, with a CCC of 0.896 (95% CI 0.844–0.931). Agreement analysis showed no significant bias between sessions and an interval of agreement of 5 points for SPEED score.ConclusionThe translation and adaptation of the SPEED questionnaire for the Italian language have demonstrated good psychometric properties for the translated questionnaire, confirming and expanding the original psychometric characteristics. Consequently, the SPEED questionnaire could be used to measure the presence of symptoms of dry eye quantitatively.     

Digestive protection of probiotic Lacticaseibacillus rhamnosus in Ricotta cheese by monoglyceride structured emulsions

This research aimed at studying the potential use of monoglyceride (MG) structured emulsions (MSEs) as delivery and protective systems for probiotic bacteria in Ricotta cheese. To this purpose, a low-fat commercial Ricotta cheese was added with MSEs formulated with milk, as water phase, and sunflower oil (MSE-SO) or anhydrous milk fat (MSE-AMF), as lipid phase. A commercial whole milk Ricotta cheese (W-RC) was considered as reference. A probiotic Lacticaseibacillus rhamnosus strain was inoculated as free cells in W-RC or embedded into the MSEs and added to the low-fat Ricotta at the same reference fat content. After physico-chemical characterisation, L. rhamnosus viability and sample destructuring behaviour upon in vitro digestion were evaluated. At the end of in vitro digestion, both W-RC and sample containing MSE-SO were unable to protect cells. By contrast, sample with AMF ensured a sufficient probiotic viability, even after 14 days of storage at 4 °C. This result was attributed to system composition and structure. During the gastric phase, the presence of caseins and MG-AMF mixed structures induced the formation of clots, entrapping and protecting cells against the acidic pH of the stomach, as confirmed by confocal micrographs and particle size. During the intestinal phase, cell viability was guaranteed by the formation of mixed micelles promoted by MG. It was demonstrated that microbial cells located near MG structures where they found protection.     

Cheese ripening in nonconventional conditions: A multiparameter study applied to Protected Geographical Indication Canestrato di Moliterno cheese

A multiparameter study was performed to evaluate the effect of fondaco, a traditional ripening cellar without any artificial temperature and relative humidity control, on the chemical, microbiological, and sensory characteristics of Protected Geographical Indication Canestrato di Moliterno cheese. Ripening in such a nonconventional environment was associated with lower counts of lactococci, lactobacilli, and total viable bacteria, and higher presence of enterococci, in comparison with ripening in a controlled maturation room. Moreover, fondaco cheese underwent accelerated maturation, as demonstrated by faster casein degradation, greater accumulation of free AA, and higher formation of volatile organic compounds. Secondary proteolysis, as assessed by liquid chromatography-mass spectrometry of free AA and low molecular weight peptides, did not show any qualitative difference among cheeses, but fondaco samples evidenced an advanced level of peptidolysis. On the other hand, significant qualitative differences were observed in the free fatty acid profiles and in the sensory characteristics. Principal component analysis showed a clear separation of the fondaco and control cheeses, indicating that ripening in the natural room conferred unique sensory features to the product.     

Anchor plate bearing capacity in flexible mesh facings

This work addresses the problem of the loading capacity of an anchor plate coupled with a steel wire mesh in soil retaining applications. The interaction mechanism between the flexible mesh facing, the underlying soil layer and the plate is studied starting from the results of several laboratory punch tests involving both the plate and the mesh only, and the whole soil-mesh-plate system. The experimental tests have been reproduced by adopting a 3D discrete element model where also the wire mesh is discretized as an assembly of interconnected nodal particles. The interaction between these particles is ruled by elasto-plastic tensile force–displacement laws in which a distortion is introduced in a stochastic manner to account for the wires’ geometrical irregularities. The mesh model is then validated with reference to a set of punch tests in which the shape and size of the punching element as well as the nominal wire diameter were varied. Subsequently, the model is extended to a punch against soil test configuration permitting an insight into the nontrivial local mechanism between the mesh facing and the underlying granular layer. The good agreement between the numerical predictions and the experimental observations at the laboratory scale allowed us to extend the model towards more realistic field conditions for which the role of the mesh panel boundary conditions, the mesh mechanical properties, the soil mechanical properties and the anchor plate geometry is investigated.     

Field trial of a reinforced landfill cover system: performance and failure

The geotechnical stability of an inclined multilayer capping depends on the shear strength available along the various interfaces. If the slope is very steep an additional reinforcing geosynthetic may be used to obtain a safer condition. Full-scale field trials can provide better resolution data on the reinforcement behaviour than conventional calculation methods based only on laboratory tests. The paper deals with a field trial carried out on multilayer capping, reinforced with a geogrid, in an Italian landfill. The geogrid behaviour was monitored for a month using displacement sensors and pressure cells located along the slope and in the anchor trench. Subsequently, the cover system was led to collapse by cutting the reinforcement and an analysis of the reinforcement behaviour and its relevance in the system stability were studied. This paper discusses in detail the setup of the field trial and the experimental data recorded during installation, monitoring, and failure phases of the system. The deformation behaviour of the geogrid during the entire test was recorded and analysed. The resulting data highlight the effects of the construction process on the geogrid behaviour including the contribution of geogrid creep characteristics until the failure.     

Can regional policies shape migration flows?

Our empirical analysis focuses on the effect of regional policies on migration attraction factors in Europe. We employ a regression discontinuity design to assess the causal relationship between the reception of large amounts of public funds and migration flows in the EU-15 regions. In highly-subsidised regions, we find a large increase in the share of foreign citizens from less-developed countries when compared to low-subsidised regions with similar pre-treatment characteristics. The analysis shows that such an increase is due to the positive impact of the European regional policy on job market opportunities as well as the improvement of public goods supply.