激光在线测厚振动分析与精度优化

激光测厚具有安全可靠、测量精度高、测量范围大等优点,广泛应用于纸张、电池极片等薄膜类材料厚度的在线测量。带材宽幅方向扫描测厚时由于扫描架往复运动会产生机械振动,影响在线测厚精度。针对该问题,以锂离子电池极片厚度测量为例,使用双激光差动式测厚平台对电池极片和铜箔分别进行厚度测量,然后对测厚数据进行频谱分析,探究其振动规律的相似性,并基于频谱分析结果采用滑动带阻滤波方式对测厚数据进行处理,滤波后极片和铜箔的厚度极差分别降低了33.4%和73.8%,有效过滤了机械振动导致的测量误差,可满足极片和铜箔厚度测量的精度要求。     

Polynomial filtering for nonlinear stochastic systems with state‐ and disturbance‐dependent noises

This article is concerned with the polynomial filtering problem for a class of nonlinear stochastic systems governed by the Itô differential equation. The system under investigation involves polynomial nonlinearities, unknown‐but‐bounded disturbances, and state‐ and disturbance‐dependent noises ((x,d)‐dependent noises for short). By expanding the polynomial nonlinear functions in Taylor series around the state estimate, a new polynomial filter design method is developed with hope to reduce the conservatism of the existing results. In virtue of stochastic analysis and inequality technique, sufficient conditions in terms of parameter‐dependent linear matrix inequalities (PDLMIs) are derived to guarantee that the estimation error system is input‐to‐state stable in probability. Moreover, the desired polynomial matrix can be obtained by solving the PDLMIs via the sum‐of‐squares approach. The effectiveness and applicability of the proposed method are illustrated by two numerical examples with one concerning the permanent magnet synchronous motor.     

Learning Association Rules and Tracking the Changing Concepts on Webpages: An Effective Pornographic Websites Filtering Approach

We applied the decision tree algorithm to learn association rules between webpage’s category (pornographic or normal) and the critical features. Based on these rules, we proposed an efficient method of filtering pornographic webpages with the following major advantages: 1) a weighted window-based technique was proposed to estimate for the condition of concept drift for the keywords found recently in pornographic webpages; 2) checking only contexts of webpages without scanning pictures; 3) an incremental learning mechanism was designed to incrementally update the pornographic keyword database.     

New version of continuous–discrete cubature Kalman filtering for nonlinear continuous–discrete systems

For nonlinear continuous–discrete systems, this paper elaborates a new accurate implementation of continuous–discrete cubature Kalman filter (CD-CKF). As the main contribution of this work, the new Kalman prediction stage begins by integrating the nonlinear continuous model for all the cubature sample vectors; the prior estimate state and covariance prediction are based on the weighted statistics of these integrated cubature sample vectors and the Gauss–Legendre approximation scheme. The new square root form CD-CKF is also derived and accurately implemented by combining with the modified variable stepsize NIRK. As the advantages of proposed approach, the complicated and error-prone processes of solving covariance differential equation or calculating derivatives are avoided, while the positive semi-definiteness of prior error covariance are numerically guaranteed. Simulations of traffic control scenarios further confirm the new approach’s superior filtering performance in both reliability and accuracy.     

Comparison of joint angle,velocity and acceleration estimators for hydraulically actuated manipulators to a novel dynamical approach

Excavators are used for a wide range of applications like earthworks and material handling. Assistance systems are becoming more common to support the operator. For monitoring and control based assistance functions the angular position, velocity and acceleration of the joints from the working implement are required. Commercial systems often use inertial measurement units, consisting of triaxial accelerometers and gyroscopes, to accomplish an estimation of those states. A novel joint angle, velocity and acceleration estimation for hydraulic manipulators is proposed and compared to state of the art methods. A decentralized kinematic filter using no information about the underlying system and a centralized kinematic filter taking the system kinematics into account are implemented as state of the art approaches. Both filters only use inertial measurement units to obtain information about the current state of the system. The novel centralized dynamic filter uses the same information as the centralized kinematic filter and extends it by a dynamic model containing additional information about the angular acceleration due to pressure readings of the hydraulic cylinders. Kalman filtering is used to combine the derived system and measurement models with the sensor information. The methods are evaluated on a material handling excavator for single and coupled movements of the working implement. The novel centralized dynamic filter enables improvements for the angular acceleration estimation compared to the decentralized and centralized kinematic filter. Less noise of the acceleration estimation and a better tracking of the actual acceleration are shown.     

胶莱盆地南部大盛群、王氏群的划分与对比

胶莱盆地在胶东半岛地质构造及造山带研究中占有重要地位,其巨厚的白垩系陆相沉积是石油系统多年的研究目标。胶莱盆地南部白垩纪的岩石地层序列较其北部更为复杂,其认识几经反复,其中尤以大盛群与王氏群和莱阳群的部分单位的关系为甚。本次工作通过详细对比其沉积层序、相互关系、古生物组合、岩石学特征及同位素年龄等因素,认为大盛群与王氏群属同一沉积层序,沉积基底相同、沉积环境相似、古生物群落时代一致,二者具有同时代、同沉积相、同岩石组合的一致性,应是一套地层,建议今后使用统一地层名称。     

消防法制建设与消防监督的相关性探究

文章从我国消防法制建设的现状出发,简要介绍了现行的消防法律法规,并详细解读了其现存问题,最后分别从消防法制建设与消防监督两个角度提出了发展对策,以期能为改善我国现阶段的消防法制建设和消防监督体系带来一定的参考意见.     

Distributed two‐stage state estimation with event‐triggered strategy for multirate sensor networks

This paper investigates the state estimation issue for a class of wireless sensor networks (WSNs) with the consideration of limited energy resources. First, a multirate estimation model is established, and then, a new event‐triggered two‐stage information fusion algorithm is developed based on the optimal fusion criterion weighted by matrices. Compared with the existing methods, the presented fusion algorithm can significantly reduce the communication cost in WSNs and save energy resources of sensors efficiently. Furthermore, by presetting a desired containment probability over the interval [0,1] with the developed event‐triggered mechanism, one can obtain a suitable compromise between the communication cost and the estimation accuracy. Finally, a numerical simulation for the WSN tracking system is given to demonstrate the effectiveness of the proposed method.     

Energy Filtering of Charge Carriers: Current Trends,Challenges, and Prospects for Thermoelectric Materials

Exhaustive attempts are made in recent decades to improve the performance of thermoelectric materials that are utilized for waste heat‐to‐electricity conversion. Energy filtering of charge carriers is directed toward enhancing the material thermopower. This paper focuses on the theoretical concepts, experimental evidence, and the authors' view of energy filtering in the context of thermoelectric materials. Recent studies suggest that not all materials experience this effect with the same intensity. Although this effect theoretically demonstrates improvement of the thermopower, applying it poses certain constraints, which demands further research. Predicated on data documented in literature, the unusual dependence of the thermopower and conductivity upon charge carrier concentrations can be altered through the energy filtering approach. Upon surmounting the physical constraints discussed in this article, thermoelectric materials research may gain a new direction to enhance the power factor and thermoelectric figure of merit.     

Correlation between instrumental stress and oral processing property of chicken broiler breast under wooden breast myopathy

Wooden breast myopathy affects the quality of fresh and processed chicken breast muscle. The objective of this study was to construct a classification method by instrumental stress, and the effects of wooden breast myopathy on meat quality and oral processing property, and was to explore correlations between stress and oral processing parameters. The severity of wooden breast myopathy was highly correlated to fillet weight (R² = 0.740), thickness (R² = 0.826) and hardness (R² = 0.803) (P < 0.01). The 3D scatter model based on stress is robust and reliable to classify the fillets into four categories (normal, mild, moderate and severe wooden breast fillets), avoiding manual grading. Moisture, fat, collagen, pH, drip loss, cooking loss, thawing loss, purge loss, hardness, gumminess and chewiness significantly increased with the severity of wooden breast myopathy, whereas fat, ash and water/salt-soluble protein contents significantly decreased (P < 0.05). Shear force reached the maximum (36.32 N) when this myopathy was moderate. The myopathy led to an increase in masseter activity and the particle size of the bolus. Significantly higher correlations between stress, Dx(50) (R² = 0.790), Dx(90) (R² = 0.771) and D[4,3] (R² = 0.797) were found (P < 0.01). This study also showed that jaw movement and muscle activity could be used to understand the links between physical property and orally sensory property.