过滤机技术经济分析

本文分析了国内外几种典型过滤机的投资和运行成本，结果发现，国内真空过滤机投资最小，但单位精矿过滤成本并不低；陶瓷过滤机投资大，但单位精矿过滤成本较低；国外产的压滤机投资较大，单位精矿过滤成本也较大。     

Characterization of best Chebychev approximation using the frequency response of IIR digital filters with convex stability

This paper deals with the application of Chebychevʼs approximation theory to IIR digital filter frequency response (FR) approximation. It explores the properties of the frequency response of IIR digital filters as a nonlinear complex approximating function; IIR digital filter frequency response is used to approximate a prescribed magnitude and phase responses. The approximation problem is closely related to optimization. If the set of approximating functions is non-convex, the optimization problem is difficult and may converge to a local minimum. The main results presented in the paper are proposing a convex stability domain by introducing a condition termed “sign condition” and characterization of the best approximation by the Global Kolmogorovʼs Criterion (GKC). The Global Kolmogorovʼs Criteria is shown to be also a necessary condition for the approximation problem. Finally, it is proved that the best approximation is a global minimum. The sign condition can be incorporated as a constraint in an optimization algorithm.     

基于PMF-FFT的伪码捕获算法分析

建立了PMF-FFT算法的数学模型,分析了相关器个数、相关积累长度和FFT点数对积累损失、扇贝损失和频率分辨率的影响。在此基础上,结合算法的效率和运算量,给出了PMF-FFT算法参数选择的原则和依据。     

Slug Test Analysis in Vertical Cutoff Walls with Consideration of Filter Cake

In constructing a vertical cutoff wall, bentonite-water slurry is frequently used to maintain the stability of sidewalls during excavation before backfilling the trench with less permeable materials to complete the cutoff wall construction. This procedure leads to a thin but relatively impermeable layer, called a filter cake, on the excavation surface. The aim of this paper is to examine the effect of a filter cake on evaluating hydraulic conductivity of the cutoff wall backfill through a slug test analysis with the aid of the verified numerical program, Slug_3D. As an upper bound solution for evaluation of the hydraulic conductivity of the cutoff wall backfill, no-flux boundary conditions for the boundaries of cutoff walls are imposed to consider the effect of filter cakes. The type-curve method and modified line-fitting method are employed to reanalyze the case of EMCON/OWT, Inc., as an example. The previous analysis, without consideration of a filter cake, is compared with the current results that consider the filter cake to reveal the necessity of considering the effect of a filter cake in the slug test analysis. The comparison shows that the hydraulic conductivity of the cutoff wall backfill will be underestimated in a slug test analysis if the filter cake is not properly considered.     

Limitations to the Use of Woven Roving Glass Fibers in Plastic Composites,or the Case Against Woven Roving

Composite materials consist of at least two chemically distinct phases basically having a reinforcing material supported in a matrix material with a distinct reinforcement/matrix (R/M) interface separating the components; the components must be combined three-dimensionally. The composite has properties distinctly different from the properties of any constituents, which generally would not be achieved in any of the constituents acting alone. The principle is to use the plastic flow in the matrix to load the reinforcement in the direction of the applied load. To do this it is necessary to transfer and share the externally applied service loads of the composite through the weak matrix to the stronger reinforcement by a shear loading action. The job of the matrix is to transmit and distribute the stresses onto the individual fibers and to maintain the separation and orientation of the fibers. The interface is the critical factor that determines to what extent the potential properties of the composite will be achieved and maintained during usage. The interface must have the appropriate chemical and physical features in order to provide the necessary load transfer from the matrix to the reinforcement [1]. While the strain at the point of service loading is not uniformly distributed over the composite cross section, a finite distance away it does assume a uniform distribution. At this area the shear stress at the component interfaces is zero in the direction of the applied load [2].     

Thinking about Antarctic Heritage: Kaleidoscopes and filters

The preliminary results of a project that is currently investigating the nature and range of meanings of Antarctic heritage are explored. The project involves two visits to Scott Base, and the subjects of the qualitative research are the members of the New Zealand Antarctic community. Work so far suggests that different meanings do exist, and a four-fold typology of meanings is suggested which needs to be considered in decisions affecting the future of Antarctica.     

用离散颗粒数值模拟对陶瓷过滤器滤饼结构的研究

针对IGCC和PFBC中的关键问题 ,用离散颗粒数值模拟方法对高温陶瓷过滤器滤饼的形成过程进行了数值模拟。通过对模拟结果的分析 ,得出了滤饼的内部结构特性。研究发现 ,同种粉尘颗粒在滤饼内部的分布具有显著的不均匀性。在滤饼形成过程中 ,小粉尘颗粒明显有向滤饼内部渗透的现象     

Use of Impedance Probe for Estimation of Porosity Changes in Saturated Granular Filters under Cyclic Loading: Calibration and Application

Gravimetric and volumetric sampling techniques are reliable for the measurement of porosity in fully saturated granular filters. However, both methods require a significant effort to gather and prepare samples, are time intensive to process, and do not capture real-time changes. Portable impedance probes serve as a valuable alternative to these destructive and laborious sampling methods. These probes measure the dielectric properties of the soil-water mixtures from which the porosity of filters may be inferred. This study demonstrates that generalized calibrations can result in large errors for porosity estimation when using diverse and small-scale filter types. By comparing with gravimetric and volumetric based porosity measurements for saturated granular filter porosity, impedance probes with filter-specific calibration offer the reliability and confidence owing to its reduced error in a quick, nondestructive fashion. This paper also presents the results of a laboratory investigation using an impedance probe to monitor real-time changes in the porosity of saturated granular filters subjected to cyclic train loading.     

永磁同步电机多采样率EKF转速辨识

永磁同步电机（Permanent Magnet Synchronous Motor,PMSM）具有响应快、高精度、高转矩比等诸多优点,同时无传感器控制策略研究能有效提高PMSM系统的简易性和鲁棒性。在分析EKF和多采样率数字控制系统的基础上,建立永磁同步电机输入多采样率EKF算法,将其用于转速估计。通过仿真和实时实验验证其算法在辨识精度及收敛稳定性方面均优于单采样率EKF算法,并和高频单采样率EKF有着一致的辨识效果,而多采样率EKF算法的数据量及运算量均小于高频单采样率EKF。     

无人机载软件接收机同步方案研究

为确保无人飞机进行稳定的数据传输,该文提出了一种基于部分匹配滤波器和两级FFT的快速同步捕获算法,该算法能在搜索出同步点位置的同时,有效估计载波频偏,且计算复杂度显著下降。在动态环境中,载波多普勒频移变化剧烈,普通接收机跟踪环容易失锁,该文提出了一种基于经验值查表的载波跟踪算法,在锁频环内引入经验值查找表,环路能自适应调整滤波器带宽,任意时刻都能保证高精度跟踪。仿真实验表明,当输入信噪比高于-35 dB,载波初始多普勒频偏在12.8 kHz以内,机动载体相对于卫星转发器的径向加速度为5 m/s2(等效多普勒频移变化速度为180 Hz/s),无人机载软件接收机可以进行稳定的数据传输。