Application of ferrous sulfate alleviates negative impact of cadmium in rice (<i>Oryza sativa</i> L.)

Soil contamination with toxic heavy metals [such as cadmium (Cd)] is becoming a serious global problem due to rapid development of social economy. Iron (Fe), being an important element, has been found effective in enhancing plant tolerance against biotic and abiotic stresses. The present study investigated the extent to which different levels of Ferrous sulphate (FeSO₄) modulated the Cd tolerance of rice (Oryza sativa L.), when maintained in artificially Cd spiked regimes. A pot experiment was conducted under controlled conditions for 146 days, by using natural soil, mixed with different levels of CdCl₂ [0 (no Cd), 0.5 and 1 mg/kg] together with the exogenous application of FeSO₄ at [0 (no Fe), 1.5 and 3 mg/kg] levels to monitor different growth, gaseous exchange characteristics, oxidative stress, antioxidative responses, minerals accumulation, organic acid exudation patterns of O. sativa. Our results depicted that addition of Cd to the soil significantly (P < 0.05) decreased plant growth and biomass, gaseous exchange parameters, mineral uptake by the plants, sugars (soluble, reducing, and non-reducing sugar) and altered the ultrastructure of chloroplasts, plastoglobuli, mitochondria, and many other cellular organelles in Cd-stressed O. sativa compared to those plants which were grown without the addition of Cd in the soil. However, Cd toxicity boosted the production of reactive oxygen species (ROS) by increasing the contents of malondialdehyde (MDA), which is the indication of oxidative stress in O. sativa and was also manifested by hydrogen peroxide (H₂O₂) contents and electrolyte leakage to the membrane bounded organelles. Although, activities of various antioxidative enzymes like superoxidase dismutase (SOD), peroxidase (POD), catalase (CAT) and ascorbate peroxidase (APX) and non-enzymatic antioxidants like phenolics, flavonoid, ascorbic acid, anthocyanin and proline contents increased up to a Cd level of 0.5 mg/kg in the soil but were significantly diminished at the highest Cd level of 1 mg/kg in the soil compared to those plants which were grown without the addition of Cd in the soil. The negative impacts of Cd injury were reduced by the application of FeSO₄ which increased plant growth and biomass, improved photosynthetic apparatus, antioxidant enzymes, minerals uptake together with diminished exudation of organic acids as well as oxidative stress indicators in roots and shoots of O. sativa by decreasing Cd retention in different plant parts. These results shed light on the effectiveness of FeSO₄ in improving the growth and upregulation of antioxidant enzyme activities of O. sativa in response to Cd stress. However, further studies at field levels are required to explore the mechanisms of FeSO₄-mediated reduction of the toxicity of not only Cd, but possibly also other heavy metals in plants.     

Parameter characterization of HTPEMFC using numerical simulation and genetic algorithms

This paper develops a novel approach to the parameterisation of high temperature exchange membrane fuel cells (HTPEMFC) with limited and non-invasive measurements. The proposed method allows an effective identification of electrochemical parameters for three-dimensional fuel cell models by combining computational simulation tools and genetic algorithms. To avoid each evaluation undertaken by the optimisation method involving a complete computational simulation of the 3D model, a strategy has been designed that, thanks to an iterative process, makes it possible to decouple the fluid dynamic resolution from the electrochemistry one.Two electrochemical models have been incorporated into these tools to describe the behaviour of the catalyst layer, Butler-Volmer and spherical aggregate. For each one, a case study has been carried out to validate the results by comparing them with empirical data in the first model and with data generated by numerical simulation in the second. Results show that, from a set of measured operating conditions, it is possible to identify a unique set of electrochemical parameters that fits the 3D model to the target polarisation curve. The extension of this framework can be used to systematically estimate any model parameter in order to reduce the uncertainty in 3D simulation predictions.     

Process knowledge-based random forest regression for model predictive control on a nonlinear production process with multiple working conditions

In process industry, predictive control approaches have been widely used for nonlinear production processes. Practically, the predictor in a predictive controller is extremely important since it provides future states for the optimization problem of controllers. The conventional predictive controller with precise mathematical predictors approximating the state space of physical systems is difficult and time-consuming for nonlinear production processes, and it performs poorly over a wide range of working conditions and with significant disturbances. To address the challenges, the trend of applying artificial intelligence emerges. However, the industrial process-specific knowledge is ignored in most cases. In this study, a predictive controller with a control process knowledge-based random forest (RF) model is proposed. Specifically, working data are clustered at first to handle diverse working conditions. Then, a process knowledge-based forest predictor, namely MIW-RF model with a redesigned cascading RF structure, is proposed to incorporate control process knowledge into modeling. Thus, future states of controlled variables could be more accurately acquired for the optimizer. A simplified version of the predictive model is also developed with quick model training and updating. The proposed predictive methods are finally introduced into the controller design. According to the empirical results, the proposed methods deliver a better control performance against benchmarks, including more accurate anticipated controlled-variable responses, better set-point tracking and disturbance rejection capability.     

Experimental study and model predictions on helium release in an enclosure with single or multiple vents

This paper presents experiments performed at Canadian Nuclear Laboratories (CNL) to examine the dispersion behaviour of helium in a polycarbonate enclosure that was representative of a residential parking garage. The purpose was to gain a better understanding of the effect of buoyancy- or wind-driven natural ventilation on hydrogen dispersion behaviour. Although hydrogen dispersion studies have been reported extensively in the literature, gaps still exist in predictive methods for hazard analysis. Helium, a simulant for hydrogen, was injected near the centre of the floor with a flow rate ranging from 5 to 75 standard litres per minute through an upward-facing nozzle, resulting in an injection Richardson number ranging between 10^?1 and 10². The location of the nozzle varied from the bottom of the enclosure to near the ceiling to examine the impact of the nozzle elevation on the development of a stratified layer in the upper region of the enclosure. When the injection nozzle was placed at a sufficiently low elevation, the vertical helium profile always consisted of a homogenous layer at the top overlaying a stratified layer at the bottom. To simulate outdoor environmental conditions, a fan was placed in front of each vent to examine the effect of opposing or assisting wind on the dispersion. The helium transients in the uniform layer predicted with analytical models were in good agreement with the measured transients for most tests. Model improvements are required for adequately predicting transients with primarily stratified profiles or strong opposing wind.     

Experimental investigation on the invert stability of operating railway tunnels with different drainage systems using 3D printing technology

In recent years, the invert anomalies of operating railway tunnels in water-rich areas occur frequently, which greatly affect the transportation capacity of the railway lines. Tunnel drainage system is a crucial factor to ensure the invert stability by regulating the external water pressure (EWP). By means of a three-dimensional (3D) printing model, this paper experimentally investigates the deformation behavior of the invert for the tunnels with the traditional drainage system (TDS) widely used in China and its optimized drainage system (ODS) with bottom drainage function. Six test groups with a total of 110 test conditions were designed to consider the design factors and environmental factors in engineering practice, including layout of the drainage system, blockage of the drainage system and groundwater level fluctuation. It was found that there are significant differences in the water discharge, EWP and invert stability for the tunnels with the two drainage systems. Even with a dense arrangement of the external blind tubes, TDS was still difficult to eliminate the excessive EWP below the invert, which is the main cause for the invert instability. Blockage of drainage system further increased the invert uplift and aggravated the track irregularity, especially when the blockage degree is more than 50%. However, ODS can prevent these invert anomalies by reasonably controlling the EWP at tunnel bottom. Even when the groundwater level reached 60 m and the blind tubes were fully blocked, the invert stability can still be maintained and the railway track experienced a settlement of only 1.8 mm. Meanwhile, the on-site monitoring under several rainstorms further showed that the average EWP of the invert was controlled within 84 kPa, while the maximum settlement of the track slab was only 0.92 mm, which also was in good agreement with the results of model test.     

CFD model for tubular SOFC directly fed by biomass

The coupling between biomass gasification and Solid Oxide Fuel Cells can represent a sustainable and efficient system for electricity production. This work aims to develop a preliminary model for the operation of a tubular, electrolyte-supported fuel cell (SOFC) fed by a syngas mixture. The fuel required by the SOFC system is produced inside the energy generator box from an integrated biomass gasification system. This study stems from the European DB-SOFC project, that proposed the exploitation of the abundant biomasses deriving from agricultural residues for energetic purposes (as from olive oil and wine production). In this study, the main processes have been simulated to find a possible configuration to obtain a power value of 200 W. 25 cells were used in the model to produce the required power. The results showed that at 0.7 V it is possible to achieve 12.3 W, when the biomass gasification was integrated into the SOFC box, while it was possible to achieve 9.6 W when the system was fed by externally produced syngas.     

Experimental study on prediction model of wet gas pressure drop across single-orifice plate in horizontal pipes in the low gas phase Froude number region

The pressure drop prediction of wet gas across single-orifice plate in horizontal pipes had been solved satisfactorily under an annular-mist flow in the upstream of orifice plates. However, this pressure drop prediction is still not clearly determined when the upstream is in an intermittent flow or stratified flow, which is corresponding to a region of low Fr_G (gas phase Froude number) in the flow pattern map of wet gases. In this study, the wet gas pressure drop across a single-orifice plate was experimentally investigated in the low Fr_G region. By the experiment, the flow pattern transition in the downstream of single-orifice plates, as well as the effects of Fr_G and Fr_L (liquid phase Froude number) on Φ_G (gas phase multiplier), were determined and compared when the upstream is in the flow pattern transition and the stratified flow region, respectively. Prediction performances were examined on the available pressure drop models. It was found that no model could be capable of jointly predicting the wet gas pressure drop in the low Fr_G region with an acceptable accuracy. With a new method of correlating Fr_G and Fr_L simultaneously, new correlations were proposed for the low Fr_G region. Among which the modified Chisholm model shows the best prediction accuracies, with the prediction deviations of Φ_G being within 7% and 3% when the upstream is in flow pattern transition and stratified flow region, respectively.     

On the theory of economic MPC: ELOC and approximate infinite horizon EMPC

In recent years, the notion of Economic Model Predictive Control (EMPC) has gained significant interest. Despite a marked improvement in economic performance, it has been shown that this performance will degrade substantially if implemented with a horizon that is not sufficiently large. In the current effort, it is shown that if applied to a particular reaction process, EMPC performance will abruptly collapse at a critical horizon size. To alleviate this issue, we develop an Infinite Horizon EMPC (IH-EMPC) formulation. While this IH-EMPC problem is computationally intractable, it does lead to an approximation of the optimal policy. The resulting Approximate IH-EMPC (AIH-EMPC) is identical to the original finite horizon EMPC, but includes a final cost term that represents the objective function from the finite horizon to infinity. With two example systems, a chemical reactor and a power system with energy storage, it is shown that the AIH-EMPC policy is virtually insensitive to its computational horizon size.