A new analysis of two phase flow on hydrogen production from water electrolysis

It is clear that the entire world have to research, develop, demonstrate and plan for alternative energy systems for shorter term and also longer term. As a clean energy carrier, hydrogen has become increasingly important. It owes its prestige to the increase within the energy costs as a result of the equivocalness in the future availability. Two phase flow and hydrogen gas flow dynamics effect on performance of water electrolysis. Hydrogen bubbles are recognized to influence energy and mass transfer in gas-evolving electrodes. The movement of hydrogen bubbles on the electrodes in alkaline electrolysis is known to affect the reaction efficiency. Within the scope of this research, a physical modeling for the alkaline electrolysis is determined and the studies about the two-phase flow model are carried out for this model. Internal and external forces acting on the resulting bubbles are also determined. In this research, the analytical solution of two-phase flow analysis of hydrogen in the electrolysis is analyzed.     

Synthesis and characterization of a long side-chain double-cation crosslinked anion-exchange membrane based on poly(styrene-b-(ethylene-co-butylene)-b-styrene)

By choosing a triple block polymer, poly(styrene-b-(ethylene-co-butylene)-b-styrene) (SEBS), as the backbone and adopting a long side-chain double-cation crosslinking strategy, a series of SEBS-based anion-exchange membranes (AEMs) was successively synthesized by chloromethylation, quaternization, crosslinking, solution casting, and alkalization. The 70C16-SEBS-TMHDA membrane showed high OH⁻ conductivity (72.13 mS/cm at 80 °C) and excellent alkali stability (only 10.86% degradation in OH⁻ conductivity after soaking in 4-M NaOH for 1700 h at 80 °C). Furthermore, the SR was only 9.3% at 80 °C and the peak power density of the H₂/O₂ single cell was up to 189 mW/cm² at a current density of 350 mA/cm² at 80 °C. By introducing long flexible side chains into a polymer SEBS backbone, the structure of the hydrophilic–hydrophobic microphase separation in the membrane was constructed to improve the ionic conductivity. Additionally, network crosslinked structure improved dimensional stability and mechanical properties.     

Revealing the dimensional stability mechanisms of SiC/Al composite under long-term thermal cycling

Long-term thermal cycling causes irreversible dimensional changes of the material, which in turn affects the reliability of precision instruments. In this paper, dimensional stability mechanisms of SiC/Al composites during thermal cycling were revealed using high-precision thermal dilatometer, XRD and spherical aberration correction transmission electron microscope (Cs-TEM). First, how the factors including dislocations, internal stress and precipitates affect the dimensional change of SiC/Al composites were separately introduced. Then, the integrated effect of these factors affecting the dimensional stability of SiC/Al composites was further discussed. Among them, the integrated effect of dislocation-internal stress in SiC/pure Al composites leads to an increase in dislocation density and average lattice constant, which leads to an increase in dimensional change. The integrated effect of dislocation-internal stress-precipitates in SiC/2024Al composites leads to a decrease in the average lattice constant and some changes in the precipitation behavior (including the type, density and lattice constant of the precipitates), which ultimately leads to a decrease in dimensional change. The dimensional change of the two types of composites was semi-quantitatively estimated. Finally, the reasons for the significantly higher dimensional stability of the SiC/2024Al composites were given.     

Preparation and characterization of highly stable protic-ionic-liquid membranes

A highly durable proton exchange membranes (PEM)s based on covalently supported ionic liquid (IL) bearing sulfonic acid imidazolium groups were successfully fabricated. The membrane preparation involved radiation induced grafting of 1-vinyl imidazole (1-VIm) onto poly(ethylene-co-tetraflouroethene) (ETFE) film, followed by covalent immobilization of 3-sulfopropyl and subsequent treatment with trifluoromethanesulfonic acid. The ionic conductivity of the supported IL membranes was increased with the increase in the concentration of IL and reached a maximum value of 138 mS cm⁻¹ in a fully hydrated state with an ion exchange capacity of 4.82 mmol g⁻¹ that is higher than Nafion with a similar thickness. The membranes displayed excellent chemical and mechanical stability. In addition, the dimensional and thermal stability of supported IL-membranes were significantly higher than commercial Nafion membranes.     

Compiler compatible 5.66 Mb/mm2 8T 1R1W register file in 14 nm FinFET technology

1-read/1-write (1R1W) register file (RF) is a popular memory configuration in modern feature rich SoCs requiring significant amount of embedded memory. A memory compiler is constructed using the 8T RF bitcell spanning a range of instances from 32 b to 72 Kb. An 8T low-leakage bitcell of 0.106 μm² is used in a 14 nm FinFET technology with a 70 nm contacted gate pitch for high-density (HD) two-port (TP) RF memory compiler which achieves 5.66 Mb/mm² array density for a 72 Kb array which is the highest reported density in 14 nm FinFET technology. The density improvement is achieved by using techniques such as leaf-cell optimization (eliminating transistors), better architectural planning, top level connectivity through leaf-cell abutment and minimizing the number of unique leaf-cells. These techniques are fully compatible with memory compiler usage over the required span. Leakage power is minimized by using power-switches without degrading the density mentioned above. Self-induced supply voltage collapse technique is applied for write and a four stack static keeper is used for read Vmin improvement. Fabricated test chips using 14 nm process have demonstrated 2.33 GHz performance at 1.1 V/25 °C operation. Overall V_min of 550 mV is achieved with this design at 25 °C. The inbuilt power-switch improves leakage power by 12x in simulation. Approximately 8% die area of a leading 14 nm SoC in commercialization is occupied by these compiled RF instances.     

Effects of off-focal radiation on dimensional measurements in industrial cone-beam micro-focus X-ray computed tomography systems

A study of the secondary source phenomenon due to the presence of off-focal radiation in industrial micro-focus cone-beam X-ray computed tomography (XCT) systems and its influence on dimensional measurements is presented. Although off-focal radiation production within X-ray tubes has been studied for medical X-ray imaging systems, its properties and its effects on dimensional measurements in industrial XCT systems have not been discussed prior to this research. The study comprises: evaluation of the geometrical properties of off-focal radiation through a theoretical and experimental study of two-dimensional projection images of the scanned objects, verification of these properties using computer simulations and evaluation of the impact of the secondary source on dimensional measurements using experimental and simulation approaches. In addition, ways to minimise the effects of off-focal radiation are discussed, and reference samples for characterising the properties of off-focal radiation are proposed.     

铸造3D喷墨打印砂型尺寸精度测量评定方法研究

随着铸造行业的转型发展,3D打印技术已经成熟的应用于制造铸造砂型,所制作的砂型不再单单作为铸造过程中的半成品,而是可以作为产品面向各铸造厂进行销售。但是目前对于砂型的检验标准存在缺失,对于砂型质量的把控和评定缺少依据。针对铸造砂型的尺寸精度,通过设计制作测量试块,给出了一种3D喷墨打印砂型的测量方法及评定标准,填补了目前铸造行业中这一领域在标准上的空白,对推动3D打印技术在铸造行业的应用以及砂型的产品化有着重要的意义。     

3D打印连续芳纶纤维/聚乳酸波纹夹层结构复合材料的压缩性能研究

以连续芳纶纤维(Kevlar)为增强体,热塑性聚乳酸(PLA)为基体,采用熔融沉积成型(FDM)工艺,设计并制备了一体成型的Kevlar/PLA波纹夹层结构复合材料。研究了Kevlar/PLA波纹夹层结构复合材料在压缩载荷下的断裂模式,分析了结构参数、工艺参数对试样的压缩性能和结构密度的影响。结果表明,随着芯层波纹数量的增加,试样的压缩性能与结构密度均呈增大趋势;随着芯层波纹高度的增大,试样的压缩强度先增大后减小,结构密度不断减小;随着打印层高的增大,试样中的纤维体积含量不断减少,试样的压缩强度略有下降。     

The vibration and pull-in mechanism of two coupled elastically restrained beams assembly subjected to electrostatic force

ABSTRACT

The novel model of the coupled beam-type electrodes with elastic roots, subjected to the AC and DC voltages is constructed. The exact critical pull-in voltage of the two coupled elastically restrained beams with size effect is presented. The analytical method of the general system subjected to the AC and DC voltages simultaneously is presented. The characteristic mechanism of coupled vibration is investigated.     

AppFusion: Interactive Appearance Acquisition Using a Kinect Sensor

We present an interactive material acquisition system for average users to capture the spatially varying appearance of daily objects. While an object is being scanned, our system estimates its appearance on‐the‐fly and provides quick visual feedback. We build the system entirely on low‐end, off‐the‐shelf components: a Kinect sensor, a mirror ball and printed markers. We exploit the Kinect infra‐red emitter/receiver, originally designed for depth computation, as an active hand‐held reflectometer, to segment the object into clusters of similar specular materials and estimate the roughness parameters of BRDFs simultaneously. Next, the diffuse albedo and specular intensity of the spatially varying materials are rapidly computed in an inverse rendering framework, using data from the Kinect RGB camera. We demonstrate captured results of a range of materials, and physically validate our system.