SDN中基于KMOBPSO的高可靠性控制器部署算法

针对SDN中控制器系统的单节点故障问题,兼顾系统成本和系统时延,应用N+1冗余备份模型来提高SDN控制器部署的可靠性,并将其抽象为多目标优化问题.同时,提出了一种融合K-means聚类算法和遗传算子的多目标二进制粒子群算法——KMOBPSO算法,以求解SDN控制器高可靠性部署问题的解.仿真结果表明,所提算法具有求解精度高、分布均匀、沿Pareto前沿面覆盖广的特点,能够显著提高SDN中控制器部署的可靠性.     

Heterogeneity in Youth Symptom Trajectories Following Psychiatric Crisis: Predictors and Placement Outcome.

The authors examined heterogeneity in symptom trajectories among youths following psychiatric crises as well as the psychosocial correlates and placement outcomes associated with identified trajectories. Using semiparametric mixture modeling with 156 youths approved for psychiatric hospitalization, the authors identified 5 trajectories based on symptoms over the 16 months following crisis: high improved, high unimproved, borderline improved, borderline unimproved, and subclinical. Membership in unimproved symptom groups was associated with less suicidality, younger age, more youth hopelessness, and more caregiver empowerment. Improved symptom group membership predicted long-term decreases in days in out-of-home placements. More important, and in contrast with general impressions from the existing literature, findings suggest that a substantive proportion of youths with serious emotional disturbance sustain high levels of symptomatology following intensive mental health services. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A robust adaptive pole‐placement controller without strictly positive real condition

This paper considers the adaptive pole‐placement control problem for system (1) with unmodelled dynamics η_n dominated by a small constant ε multiplied by a quantity independent of ε but tending to infinity as the past input, output, and noise grow. Using bounded external excitation and randomly varying truncation techniques, we give a design method of adaptive pole‐placement controller. It is shown that the closed‐loop system is globally stable, the estimation error for the parameter contained in the modelled part is of order ε, and the closed‐loop system under the adaptive pole‐placement control law is suboptimal in the sense of $$\mathop{\lim\sup}\limits_{{n\to\infty }}{1\over n}\mathop{\sum}\limits_{i=0}^n{\left({A^{*}(z)y_{n}‐L(z)C(z)w_{n}‐B(z)R(z)y_{n}^{*}}\right)^{2}{\leq}O({\varepsilon}^{2})+\gamma^{2}\mathop{\sum}\limits_{j=1}^q{b_{j}^{2}}}$$\nopagenumbers\end while the SPR condition used usually in other papers is replaced by a stability condition. Copyright © 2001 John Wiley & Sons, Ltd.     

LED生产过程中的质量控制

对LED封装过程可能出现的问题逐一指出，并提出解决的办法，着重介绍封装位置对LED发光亮度的影响。以期引起LED封装管理人员及工作人员的注意。     

Data fitting with a spline using a real-coded genetic algorithm

To obtain a good approximation for data fitting with a spline, frequently we have to deal with knots as variables. The problem to be solved then becomes a continuous nonlinear and multivariate optimization problem with many local optima. Therefore, it is difficult to obtain the global optimum. In this paper, we propose a method for solving this problem by using a real-coded genetic algorithm. Our method can treat not only data with a smooth underlying function, but also data with an underlying function having discontinuous points and/or cusps. We search for the best model among candidate models by using the Bayes Information Criterion (BIC). With this, we can appropriately determine the number and locations of knots automatically and simultaneously. Five examples of data fitting are given to show the performance of our method.     

Urea briquette applicator for transplanted rice

A plunger-type, completely hand-operated applicator prototype, made of polyvinyl chloride (PVC), for deep placement of urea briquettes (UB), i.e., pillow-shaped urea supergranules with edges, in line transplanted rice has been developed for use by small-scale rice farmers. The field evaluation of the applicator was conducted in the Philippines during the 1989 dry season. The applicator consistently placed UB at proper depth (7 to 8 cm), which resulted in low concentrations of urea N (<7 ppm) in about 4 cm of floodwater 1 day after placement. These findings indicated that the prototype worked properly. Average work output of the applicator was 0.20 ha workday^–1 and may increase with practice. The yields of irrigated transplanted rice in the field trials show that agronomic efficiencies of hand-placed UB and applicator-placed UB were equal and were superior to those of split-applied prilled urea.     

A unified method for optimal arbitrary pole placement

We consider the classic problem of pole placement by state feedback. We offer an eigenstructure assignment algorithm to obtain a novel parametric form for the pole-placing feedback matrix that can deliver any set of desired closed-loop eigenvalues, with any desired multiplicities. This parametric formula is then exploited to introduce an unconstrained nonlinear optimisation algorithm to obtain a feedback matrix that delivers the desired pole placement with optimal robustness and minimum gain. Lastly we compare the performance of our method against several others from the recent literature.     

Increasing urea-N efficiency for transplanted lowland rice by pneumatic injection: Yield and economics at the farm level

To increase the fertilizer-N efficiency in lowland rice (Oryza sativa L.) cultivation, new management practices are needed. Main cause of the present low efficiency is the low N recovery by plants, as a considerable part of the N applied is lost; deep placement techniques improve the recovery. A pneumatic injector, with which urea prills can be point-placed at a depth of 5–10 cm in paddy soils, was tested in 38 on-farm trials in 1989/90, mostly during the wet season. The experiments, located in Africa and Asia, focussed on differences in grain yield between conventional methods of broadcasting urea and injection by the pneumatic injector, at recommended N-rates. The study shows that the pneumatic injector is effective as a tool to improve the N fertilizer efficiency. The average yield increases per region, resulting from the use of the injector, ranged from about 250 to 1300 kg grain ha^–1. The value of the yield increase would allow most farmers to recover the costs of the injector within one season, even if labour was hired to carry out the injections. The average labour requirement of the injector was 40 hours ha^–1. In Indonesia, injection of prilled urea gave yields similar to those obtained with urea briquettes.     

Effect of granule size and the placement geometry on the efficiency of urea supergranules for wetland rice grown on a permeable soil

In a laboratory experiment 5 cm depth of water was allowed to percolate daily down through a 15 cm thick soil (Typic Ustipsamment) layer. It was observed that leaching losses of urea supergranules (USG)-N could be decreased by about 20% by the placement of four 0.25 g granules at four points instead of one 1 g granule at one point. In field microplots, the placement of approximately 30 granules of 0.30 g size instead of 9 granules of 1.00 g size resulted in reduced leaching of USG-N and, in turn, increased rice yield. In a follow-up field study, the advantage of more frequently placed USG was confirmed. As compared with 1 g USG placed in the usual manner in the center of four rice hills, increasing the density of placement in soil produced 15% more rice grain. Further increase in rice yield could be obtained by increasing the number of USG placed in the soil and decreasing the size of the granule from 1.00 g to 0.70 or 0.35 g. With USG of 0.35 and 0.70 g yields were equal or sometimes even slightly higher than with split application of prilled urea on a heavily percolating, low-CEC, light-textured soil.     

Nitrogen transformations during hydrolysis and nitrification of urea

Nitrogen transformations occurring in ten soils fertilized with urea were determined during incubation in the laboratory for four weeks. Urea was applied at one rate, but with different placement methods. Urea was applied in solution, as prills with a 1 cm grid spacing and as prills with no spacing. Unfertilized soils and soils amended with KNO₃ solution were included as controls.Nitrite accumulated in the majority of soils treated with urea, and the maximum nitrite concentration measured was directly related to initial soil pH. Cumulative gaseous N losses as percentages of applied N were: NH₃, 0-59.6; N₂, 0-4.9; N₂O, 0-9.9; KMnO₄-N, 0-1.3; CH₃ONO, 0-<0.1. No gaseous N evolution was detected in control treatments. Gaseous N losses were correlated with soil pH (NH₃) maximum NO ₂ ^- concentration (N₂, N₂O, KMnO₄-N) and organic C content (N₂, N₂O). Fertilizer placement effects were generally not significant and were small in comparison with differences between soils.

---

Resumo Foram determinadas, durante incubação em laboratório por quatro semanas, as transformações do nitrogênio ocorridas em dez solos fertilizados com uréia. A uréia foi aplicada a um só nivel, mas com diferentes métodos de aplicação: em solução e em grânulos com 1 cm de espaçamento de grade e em grânulos sem espaçamento. Solos não fertilizados e solos corrigidos com solução de KNO₃ foram incluidos como controles.O nitrito acumulado na maioria dos solos tratados com uréia e a concentração máxima de nitrito medido foram diretamente relacionados ao pH inicial do solo. As perdas cumulativas de N gasoso tomadas em percentagens de N aplicado foram: NH₃, 0-59.6; N₂, 0-4.9; N₂O; 0-9.9; KMnO₄-N, 0-1.3; CH₃ONO, 0-<0.1. Não foi detectada liberação de N gasoso nos tratamentos de controle. As perdas de N gasoso foram relacionadas com o pH do solo (NH₃), concentração máxima de NO ₂ ^- (N₂, N₂O, KMnO₄-N) e teor de C orgânico (N₂, N₂O). Efeitos da aplicação de fertilizante não foram de um modo geral significativos e foram pequenos em comparação com as diferenças entre os solos.