Synthesis and characterization of a long side-chain double-cation crosslinked anion-exchange membrane based on poly(styrene-b-(ethylene-co-butylene)-b-styrene)

By choosing a triple block polymer, poly(styrene-b-(ethylene-co-butylene)-b-styrene) (SEBS), as the backbone and adopting a long side-chain double-cation crosslinking strategy, a series of SEBS-based anion-exchange membranes (AEMs) was successively synthesized by chloromethylation, quaternization, crosslinking, solution casting, and alkalization. The 70C16-SEBS-TMHDA membrane showed high OH⁻ conductivity (72.13 mS/cm at 80 °C) and excellent alkali stability (only 10.86% degradation in OH⁻ conductivity after soaking in 4-M NaOH for 1700 h at 80 °C). Furthermore, the SR was only 9.3% at 80 °C and the peak power density of the H₂/O₂ single cell was up to 189 mW/cm² at a current density of 350 mA/cm² at 80 °C. By introducing long flexible side chains into a polymer SEBS backbone, the structure of the hydrophilic–hydrophobic microphase separation in the membrane was constructed to improve the ionic conductivity. Additionally, network crosslinked structure improved dimensional stability and mechanical properties.     

Comb-shaped diblock copolystyrene for anion exchange membranes

To improve the properties of diblock copolystyrene-based anion exchange membranes (AEMs), a series of AEMs with comb-shaped quaternary ammonium (QA) architecture (QA-PS_m-b-PDVPPA_n-xC where x denotes the number of carbon atoms in different alkyl tail chains and has values of 1, 4, 8, and 10 and C denotes carbon) were designed and synthesized via subsequent quaternization reactions with three different alkyl halogens (methyl iodide and N-alkane bromines (CH₃[CH₂] _x-1Br where x = 4, 8, and 10). Compared with triblock analogues quaternized with methyl iodide in our previous research, QA-PS_m-b-PDVPPA_n-xC (x = 4, 8, and 10) AEMs are more flexible with the introduction of a long alkyl tail chain; this probably impedes crystallization of the rigid polystyrene-based main chain and induces sterically adjustable ionic association. An increase in the pendant alkyl tail chain length generally led to enhanced microphase separation of the obtained AEMs, and this was confirmed using small-angle X-ray scattering and atomic force microscopy. The highest conductivity (25.5 mS cm⁻¹) was observed for QA-PS₁₂₀-b-PDVPPA₈₀-10C (IEC = 1.94 meq g^–1) at 20 °C. Furthermore, the water uptake (<30%) and swelling ratio (<13.1%) of QA-PS_m-b-PDVPPA_n-xC AEMs are less than half of these corresponding values for their triblock counterparts. The QA-PS₁₂₀-b-PDVPPA₈₀-10C membrane retained a maximum stability that was as high as 86.8% of its initial conductivity after a 40-day test (10 M NaOH, 80 °C), and this was probably because of the steric shielding of the cationic domains that were surrounded by the longest alkyl tail chains. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47370.     

基于高斯混合隐马尔科夫模型与人工神经网络的紧急换道行为预测方法

为了有效降低因驾驶员紧急换道行为而诱发的交通事故，提高道路交通事故链阻断效率，提出一种基于高斯混合隐马尔科夫模型（GMM-HMM）和人工神经网络（ANN）的紧急换道行为预测方法。首先利用GMM-HMM对车辆行驶状态以及驾驶行为连续观察序列进行换道意图辨识，采用ANN预测下一时段的驾驶行为，再预测换道过程中的横向加速度变化率，从而判断紧急换道的危险程度。驾驶员在环仿真实验及实车实验结果表明，该方法预测避险成功率达92.83%，实验避险成功率达90.32%。该方法能有效地对紧急换道行为进行提前警告与干预。     

Heavy rare earths,permanent magnets,and renewable energies: An imminent crisis

This article sounds the alarm that a significant build-out of efficient lighting and renewable energy technologies may be endangered by shortages of rare earths and rare earth permanent magnets. At the moment, China is the predominant supplier of both and its recent rare earth industrial policies combined with its own growing demand for rare earths have caused widespread concern. To diversify supplies, new mining—outside of China—is needed. But what many observers of the “rare earth problem” overlook is that China also dominates in (1) the processing of rare earths, particularly the less abundant heavy rare earths, and (2) the supply chains for permanent magnets. Heavy rare earths and permanent magnets are critical for many renewable energy technologies, and it will require decades to develop new non-Chinese deposits, processing capacity, and supply chains. This article clarifies several misconceptions, evaluates frequently proposed solutions, and urges policy makers outside of China to undertake measures to avert a crisis, such as greater support for research and development and for the cultivation of intellectual capital.     

陈四楼煤矿“123456双重预防体系”的建设与应用

针对煤矿“双重预防体系”如何落地生根问题，结合陈四楼煤矿在风险分级管控和隐患排查治理方面的实用方法和“双重预防体系”的建设经验，深入研究了“双重预防体系”的相关标准、风险隐患事故之间的关系及其各自的产生和发展机理、安全风险的有关辨识评估方法、事故隐患的排查和治理方法，分析了传统安全管理模式与“双重预防体系”的新型安全管理模式的差别，总结出了“123456双重预防体系”这个囊括了事前安全风险辨识、事中隐患排查治理、事后安全现状评估的创新成果，实现了“事前、事中、事后”的全过程控制，对夯实煤矿安全管理根基、促进矿井平稳有序发展发挥着越来越重要的作用，为煤炭行业“双重预防体系”的落地生根提供了借鉴和参考。     

Direct shear behavior of gravel-rubber mixtures: Discrete element modeling and microscopic investigations

In this paper, a newly developed 3-dimentional discrete element model (DEM) for gravel-rubber mixtures (GRMs), namely DEM4GRM, that is capable of accurately describing the macro-scale shear response (from small to large deformation) of GRMs in a direct shear box apparatus is presented. Rigid gravel grains are modelled as simple multi-shape clumps, while soft rubber particles are modeled by using deformable 35-ball body-centered-cubic clusters. Mixtures are prepared with different volumetric rubber content (VRC) at 0, 10, 25, 40 and 100%, statically compressed under 30, 60 and 100 kPa vertical stress and then sheared, by closely simulating a reference laboratory test procedure. The variation of micro-scale factors such as fabric, normal and tangential force anisotropy is carefully examined throughout the shearing process and described by means of novel micro-mechanical relationships valid for GRMs. Moreover, strong-force chains are scrutinized to identify the transition from rigid to soft granular skeleton and gain insights on the load transfer and deformation mechanisms of GRMs. It is shown that the development of the fabric and force anisotropy during shearing is closely related to the macro-scale shear strength of GRMs, and strongly depends on the VRC. Besides, strong-force chains appear to be primarily formed by gravel-gravel contacts (resulting in a rigid-like mechanical behavior) up to VRC = 30%, and by rubber-rubber contacts (causing a soft-like mechanical response) beyond VRC = 60%. Alternatively, at 30% < VRC < 60%, gravel-rubber contacts are predominant in the strong-force network and an intermediate mechanical behavior is observed. This is consistent with the behavioral trends observed in the macro- and micro-mechanical responses.     

Towards secure cyber-physical information association for parts

Counterfeiting is a significant problem for safety-critical systems, since cyber-information, such as a quality control certification, may be passed off with a flawed counterfeit part. Safety-critical systems, such as planes, are at risk because cyber-information cannot be provably tied to a specific physical part instance (e.g., impeller). This paper presents promising initial work showing that using piezoelectric sensors to measure impedance identities of parts may serve as a physically unclonable function that can produce unclonable part instance identities. When one of these impedance identities is combined with cyber-information and signed using existing public key infrastructure approaches, it creates a provable binding of cyber-information to a specific part instance. Our initial results from experimentation with traditionally and additively manufactured parts indicate that it will be extremely expensive and improbable for an attacker to counterfeit a part that replicates the impedance signature of a legitimate part.     

Alkylated indolo[3,2,1-jk]carbazoles as new building blocks for solution processable organic electronics

A facile strategy for the introduction of tert-butyl and hexyl chains to the indolo[3,2,1-jk]carbazole scaffold is presented. With these building blocks six materials based on three different 4,4′-bis(N-carbazolyl)-1,1-biphenyl derivatives with varying degree of planarization were prepared. Characterization of the materials showed that the alkyl chains have only minor effects on the photophysical properties of the compounds. In contrast, thermal robustness towards decomposition and electrochemical stability are increased by the introduced alkyl chains. Detailed investigation of the solubility in five different solvents revealed that the incorporation of the alkyl chains increases the solubility significantly. The increased solubility of the materials allowed the application as host materials in red, green and sky-blue solution processed phosphorescent organic light emitting diodes. Hence, this work presents the first solution processed light emitting devices based on the indolo[3,2,1-jk]carbazole scaffold.     

装配式建筑外部效益分配问题研究——基于讨价还价博弈

基于外部性理论,提出装配式建筑产生的外部效益应该在各利益方之间均衡分配,实现外部效益向内部化转换,从而激发各利益主体推广装配式建筑的热情。在系统分析装配式建筑产生的外部效益的基础上,构建了政府、开发商和消费者三方之间的讨价还价博弈模型。现阶段只有满足开发商及消费者的最佳期望效益值,才能不断促使装配式建筑增量及转型。因此,为寻求最优的外部效益分配方案,构建了两种不同的博弈模型。一种是基于三大利益方的共同博弈模型,另一种是开发商与消费者达成短暂联盟与政府进行的讨价还价博弈。实证研究表明,开发商与消费者形成联盟方对分配结果有较大的影响。当开发商和消费者达成短暂联盟进行博弈时双方的分配额度都将增加,从而极大地增加了参与装配式建筑的积极性。     

基于刀具位姿的多轴数控机床运动链构建

现有数控机床(CNC)运动链构建方法多只适用于二、三轴等简单数控机床,且缺乏高效的理论分析基础和工具,针对此问题,文中选用几何分析方法,通过分析刀具在工件表面上的运动轨迹,并结合刀轴矢量规划方法,有效地解析了刀具的位姿关系;通过齐次坐标变换,有效地将数控机床运动链在工件和刀具之间的运动传递功能函数化;构建并求解刀具位姿矩阵方程组,获得一种适用于含有复杂曲面且多轴的数控机床运动链的构建方法。