An analytical method for the analysis of trihalomethanes in ambient air using solid‐phase microextraction gas chromatography‐mass spectrometry: An application to indoor swimming pool complexes

A simple method for the collection and analysis of the four brominated and chlorinated trihalomethanes (THMs) in air samples is described. Ambient air samples were collected in pre‐prepared glass vials, with THM analysis performed using solid‐phase microextraction gas chromatography‐mass spectrometry, where the need for chemical reagents is minimized. Analytical parameters, including oven temperature program, solvent volume, incubation time, vial agitation, extraction time and temperature, as well as desorption time and temperature, were evaluated to ensure optimal method performance. The developed method allows for point‐in‐time quantification (compared to an average concentration measured over extended periods of time), with detection limits between 0.7 to 2.6 µg/m³. Excellent linearity (r² > 0.99), repeatability (3% to 11% RSD), and reproducibility (3% to 16% RSD) were demonstrated over a concentration range from 2 to 5000 µg/m³. The method was validated for the analysis of THMs in indoor swimming pool air and was used to investigate the occurrence of THMs in the air above 15 indoor swimming pools. This is the first study to report the occurrence of THMs in swimming pool air in Australia, and concentrations higher than those previously reported in other countries were measured.     

Effect of a sweeping air stream and gas–phase aspect ratio of an isothermal Stefan diffusion column on the experimental estimation of binary gas diffusivities

The Stefan column consists of liquid A evaporating into an inert/stagnant gas B with a sweeping B stream at the top. It was designed to estimate binary gas diffusivities, D_AB’s, but “end effects” such as gas mixing at the top and interfacial curvature have been either ignored or uncorrelated to the operational settings. This study’s hypothesis is that gas mixing at the top and the gas–phase aspect ratio affect D_AB estimation in the acetone (A)-ambient air (B) system at 50?°C. The sweeping stream Reynolds number (Re) and the gas–phase aspect ratio (AR?=?initial gas phase height to column internal diameter) were the variables tested. Isothermal evaporation-diffusion experiments were conducted in which the temporal interfacial descent was tracked. The settings were 492 ≤ Re ≤ 5378 and AR between 5 and 15. A 1D transport model allowed determination of the experimental diffusivity, D_AB,exp, by nonlinear regression. For Re < 600, the D_AB,exp errors relative to D_AB,CE (predicted by the Chapman–Enskog kinetic theory for low-density gases) were small and unrelated to AR, while for Re > 600 the errors increased considerably with Re and were inversely proportional to AR. This study is the first to relate the column’s operational settings to the D_AB estimation errors. The column should be operated at low sweeping gas Re and large AR for accurate D_AB,exp’s. The low Re region deserves further study, while the present transport model may have to be replaced by computational fluid dynamics simulations to account for the multidimensional gas flow patterns.     

Hydrogen carriers: Production,transmission, decomposition,and storage

Recognizing the potential role of liquid hydrogen carriers in overcoming the inherent limitations in transporting and storing gaseous and liquid hydrogen, a complete production and use scenario is postulated and analyzed for perspective one-way and two-way carriers. The carriers, methanol, ammonia and toluene/MCH (methylcyclohexane), are produced at commercially viable scales in a central location, transmitted by rail or pipelines for 2000 miles, and decomposed near city gates to generate fuel-cell quality hydrogen for distribution to refueling stations. In terms of the levelized cost of H₂ distributed to the stations, methanol is less expensive to produce ($1.22/kg-H₂) than MCH ($1.35/kg-H₂) or ammonia ($2.20/kg-H₂). Levelized train transmission cost is smaller for methanol ($0.63/kg-H₂) than ammonia ($1.29/kg-H₂) or toluene/MCH system ($2.07/kg-H₂). Levelized decomposition cost is smaller for ammonia ($0.30–1.06/kg-H₂) than MCH ($0.54–1.22/kg-H₂) or methanol ($0.43–1.12/kg-H₂). Over the complete range of demand investigated, 10–350 tpd-H₂, the levelized cost of H₂ distributed to stations is aligned as methanol « ammonia ~ MCH. With pipelines at much larger scale, 6000 tpd-H₂, the levelized cost decreases by ~1 $/kg-H₂ for ammonia and MCH and much less for methanol. Methanol is a particularly attractive low-risk carrier in the transition phase with lower than 50-tpd H₂ demand.     

准噶尔盆地吉木萨尔凹陷陆相页岩油地质特征与聚集机理

综合利用岩心、测井、烃源岩热解、铸体薄片、场发射扫描电镜、激光共聚焦显微镜与高压压汞等分析测试的结果，对准噶尔盆地吉木萨尔凹陷芦草沟组陆相页岩油地质特征与聚集机理进行了研究。结果表明：吉木萨尔凹陷咸化湖盆型沉积地层富含有机质，是烃源岩层也是储层，页岩油藏具有“源储一体”的地质特征，存在粉砂岩类与泥岩类和白云岩类与泥岩类两类岩性组合类型。芦草沟组大面积整体含油、“甜点”富集且原油成熟度较低。页岩油赋存岩石的润湿性为亲油性，生烃增压是页岩油运聚的主要动力。微纳米孔喉、层理缝与构造裂缝形成页岩油的有利储集空间与渗流通道。页岩油整体为源内或近源聚集，并以游离态和吸附态赋存于芦草沟组“甜点”段与泥页岩层段中。     

Natural Silk Film for Magnesium Protection: Hydrophobic/Hydrophilic Interaction and Self‐Healing Effect

Biodegradable implants are required in order to provide successful treatment of injuries. Temporary magnesium‐based implants with particular properties are needed in cases when it is desirable not only to maintain vital activity, but also to initiate the self‐healing process of damaged bones or tissues as well. Unfortunately, the use of magnesium alloys is limited due to the fast biodegradability of the applied material. The aim of this research is to improve the corrosion resistance of magnesium alloys by sonochemical treatment in silk solution followed by additional layer‐by‐layer deposition of natural silk on the magnesium surface. The sonication process is carried out at a frequency of 20 kHz during 5–10 min, while the duration of the silk layer deposition is 15 min. The corrosion behavior of magnesium substrates modified by natural silk layer‐by‐layer assembly is studied. Magnesium substrates sonochemically treated in silk solution demonstrate three times better corrosion resistance compared to control samples sonochemically treated in water. Additional deposition of a silk layer enhances obtained corrosion resistance by 18 times, resulting in a 54‐fold increase overall.     

304不锈钢不同精炼渣碱度下夹杂物的演变

 为了提高304不锈钢的产品质量，结合生产实际，利用热力学计算和扫描电镜能谱分析方法, 研究了硅脱氧条件下，LF精炼渣碱度对304不锈钢在LF精炼、连铸过程夹杂物变化规律的影响。试验结果表明,随着冶炼过程进行，全氧质量分数和夹杂物数量依次减小。304不锈钢采用1.75高碱度炉渣，可以得到较低的全氧质量分数和夹杂物数量，但是夹杂物中Al2O3质量分数高，夹杂物熔点高。采用1.53低碱度炉渣，钢液中全氧质量分数较采用高碱度炉渣高，但是夹杂物中CaO、Al2O3质量分数相对较低，SiO2和MnO质量分数较高，夹杂物熔点低。针对304不锈钢产品可以采用不同的生产工艺路线来满足产品的不同需求。     

克深243井盐膏层大尺寸套管固井技术

克深243井是部署在新疆拜城县的一口评价井，三开钻进至库姆格列木群盐岩段中途完钻，井深5532 m，井底静止温度127.6℃，钻井液密度2.43 g/cm3，地层压力为132 MPa，下入φ273.05 mm+φ293.45 mm复合大尺寸套管进行双级固井。固井存在地层承压能力低井段易漏、盐膏层蠕变、水泥浆压稳防窜性能要求高、长封固段顶部强度发展缓慢等难题，通过选用微锰与GM-1加重剂共同干混保证水泥浆密度，选用2种防窜剂提高水泥浆防窜性能，将高温降失水剂和低温降失水剂复配使用，降低缓凝剂的加量，避免大温差下顶部水泥浆出现超缓凝，加以配套的固井工艺措施，该井段固井施工顺利，固井质量合格。      

Influence of temperature cycling and pore fluid on tensile strength of chalk

Calcite has a highly anisotropic thermal expansion coefficient, and repeated heating and cooling cycles can potentially destabilize chalks by breaking cement bonds between neighboring particles. Based on tensile strength measurements, we investigated how temperature cycles induce weakening of chalk. Tensile strength tests were performed on chalk specimens sampled from Kansas (USA) and Mons (Belgium), each with differing amounts of contact cement. Samples of the two chalk types were tested in dry and water-saturated states, and then exposed to 0, 15, and 30 temperature cycles in order to find out under what circumstances thermally induced tensile strength reduction occurs. The testing results show that the dry samples were not influenced by temperature cycling in either of the chalk types. However, in the water-saturated state, tensile strength is increasingly reduced with progressive numbers of temperature cycles for both chalk samples, especially for the more cemented Kansas chalk. The Kansas chalk demonstrated higher initial tensile strength compared to the less cemented Mons chalk, but the strength of both chalks was reduced by the same relative proportion when undergoing thermal cycles in the water-saturated state.