机井自动化供水方案改进

针对民乐县农村人饮机井水位自动供水系统控制中存在的可靠性低、成本高等问题,文章结合深井泵提取地下水进行供水的实际情况,提出了软启动控制柜+浮球开关+微电脑时间控制器改进的思路和方法,运用效果良好。     

A Lane-Level Road Marking Map Using a Monocular Camera

The essential requirement for precise localization of a self-driving car is a lane-level map which includes road markings (RMs). Obviously, we can build the lane-level map by running a mobile mapping system (MMS) which is equipped with a high-end 3D LiDAR and a number of high-cost sensors. This approach, however, is highly expensive and ineffective since a single high-end MMS must visit every place for mapping. In this paper, a lane-level RM mapping system using a monocular camera is developed. The developed system can be considered as an alternative to expensive high-end MMS. The developed RM map includes the information of road lanes (RLs) and symbolic road markings (SRMs). First, to build a lane-level RM map, the RMs are segmented at pixel level through the deep learning network. The network is named RMNet. The segmented RMs are then gathered to build a lane-level RM map. Second, the lane-level map is improved through loop-closure detection and graph optimization. To train the RMNet and build a lane-level RM map, a new dataset named SeRM set is developed. The set is a large dataset for lane-level RM mapping and it includes a total of 25157 pixel-wise annotated images and 21000 position labeled images. Finally, the proposed lane-level map building method is applied to SeRM set and its validity is demonstrated through experimentation.      

电力保护装置自动测试系统设计与研究

电力保护装置在出厂前要进行严格的板卡测试,传统板卡测试系统自动化程度较低,功能不够强大,且开发成本高,通用性不好。针对以上不足,设计了一种基于虚拟仪器的板卡测试系统,该系统主要由测试程序和上位机两部分组成,测试程序主要完成对板卡设备的模块化测试,并给出测试结果;上位机通过以太网与测试板卡通信,借助FTP和telnet技术,完成整个测试程序的发送、执行、测试结果的获取等功能。以电力保护装置内的CPU板卡为研究对象,结果表明,该测试系统可对板卡进行高效率自动测试,测试结果可靠,故障信息可追踪,可有效提高电力保护装置调试的通过率,保证企业产品的可靠性。     

SRS: Spatial-tagged radio-mapping system combining LiDAR and mobile-phone data for indoor location-based services

One of the most challenging issues in radio received signal strength (RSS)-based localization systems is the generation and distribution of a radio map with a coordinate system linked with spatial information in a large indoor space. This study proposes a novel spatial-tagged radio-mapping system (SRS) that effectively combines the heterogeneous properties of LiDAR and mobile phones to simultaneously perform both spatial and radio mappings. The SRS consists of synchronization, localization, and map building processes, and enables real-time spatial and radio mapping. In the synchronization process, the distance range, motion data, and radio signals obtained through the LiDAR and mobile phone are collected in nodal units according to the sensing time. In the localization process, a feature variance filter is used to control the number of features generated from LiDAR and estimate the positions at which the nodes are generated in real time according to the motion data and radio signals. In map building, the estimated positions of the nodes are used to extract spatial and radio maps by using a unified location coordinate system. To ensure mobility, the SRS is manufactured in the form of a backpack supporting LiDAR and a mobile phone; the usefulness of the system is experimentally verified. The experiments are performed in a large indoor shopping mall with a complex structure. The experimental results demonstrated that a common coordinate system could be used to build spatial and radio maps with high accuracy and efficiency in real time. In addition, the field applicability of the SRS to location-based services is experimentally verified by applying the constructed radio map to well-known fingerprinting algorithms using the heterogeneous mobile phones.     

"不知火"柑橘全自动包装生产线的设计与研究

目的为了解决柑橘在实际包装过程中因于人工手动装袋、装箱等导致的效率低下问题,设计一条全自动柑橘包装生产线。方法基于“不知火”柑橘的特殊体型特征,使用传送带分级装置对其进行分级;通过倾斜皮带解决柑橘排列姿态的整理问题;经给袋式包装机装袋后,采用扭结式扎口装置对其进行封口;利用并联机器人对其进行装箱。通过计算生产节拍,合理规划每个工序的循环时间,并通过Flexsim软件对该生产线进行仿真分析与平衡优化。结果该生产线整体效率由89%提升到93%,能够正常运行且满足生产力的需求。结论该柑橘包装生产线实现了柑橘的分级、整料、装袋、装箱等工序,降低了工作强度,提高了生产效率,实现了包装过程的自动化。     

Modeling unaccounted-for gas among residential natural gas consumers using a comprehensive fuzzy cognitive map

Residential natural gas consumption depends on several factors. Available tools and methods to identify, categorize, and validate effective factors have some limitations, making consumption modeling more complex. Once a comprehensive model of effective consumption factors is developed for residential gas consumers, it can predict consumption. In addition, such a model could be used to verify the accuracy of measuring devices in order to reduce unaccounted for gas (UFG). The key factors affecting residential gas consumption were identified based on previous studies and their mutual effects were analyzed using a fuzzy cognitive mapping (FCM) method. The most significant factors and their effects on natural gas consumption in the residential sector were determined. In this study, for the first time, the expected consumption for each consumer was estimated using a consumption index. Generally, if the estimated consumption is significantly different from the amount recorded by the meter, it could suggest a potential source of UFG. The proposed method was applied to the data collected from the residential gas consumers of a small region in Iran (Dasht-e Arjan region, Fars province), and the results demonstrate the effectiveness of the proposed method.     

利用平面约束的月球车立体匹配方法

为了满足月球车视觉系统对检测障碍物检测的时效性和可靠性的需求，提出了一种基于平面约束和自适应惩罚参数的半全局立体匹配算法。首先，对极线校正后的两幅图像进行SIFT特征点提取与匹配，同时提取边缘特征；然后，利用匹配的SIFT特征点拟合空间平面，并根据平面估计左右图像所有像素点的视差搜索范围；最后，基于传统的半全局匹配算法，采用自适应惩罚参数的策略对左右图像进行立体匹配。实验结果表明：所提出的算法有效地降低了计算复杂度，其计算复杂度只有传统方法的19.9%，对于视差不连续区域以及遮挡区域都能够获得正确的匹配结果。较传统半全局匹配方法无论在速度还是匹配精度上都得到明显提高，为对立体匹配的实际应用奠定了基础。     

基于改进LFM算法的主动解列断面搜索方法

针对传统解列断面算法复杂度高的问题,提出一种基于改进LFM算法的解列断面搜索方式。首先,基于节点间电气联系和能量转移分布熵完成电网加权复杂网络建模;其次,基于主动解列断面约束条件,对LFM算法做适应性改良;最后,通过改进LFM算法得到解列断面,并在IEEE39节点系统中验证了算法有效性。仿真结果表明,改进LFM算法可充分考虑传统解列断面的约束条件,在算法具有较低复杂度的同时对系统运行状态更强的适应性。     

[Zr0.73(Cu0.59Ni0.41)0.27]87Al13合金过冷液相区热塑性成形研究

为探究[Zr_(0.73)(Cu_(0.59)Ni_(0.41))_(0.27)]_(87)Al_(13)非晶合金的热塑性成形性能以及绘制其对应的热加工图谱,用Gleeble3500型热模拟压缩实验机对该非晶合金进行不同参数下的热模拟压缩实验。结果表明,合金在压缩过程中变形行为由牛顿流变演变为非牛顿流变;同时,过高或过低的热加工温度均能导致合金晶化;进一步对数据分析得到该合金在不同热塑性成形参数下的功率耗散图与流变失稳图,并绘制出相应的热加工谱图,谱图分析结果表明,该合金在温度为420与430℃、应变速率为10~(-3) s~(-1)时具有较高功率耗散系数且没有失稳区域,因此,合金可选的热塑性加工参数为温度420～430℃,应变速率10~(-3) s~(-1)。     

基于查询的新闻多文档自动摘要技术研究

针对新闻文本领域,该文提出一种基于查询的自动文本摘要技术,更加有针对性地满足用户信息需求。根据句子的TF-IDF、与查询句的相似度等要素,计算句子权重,并根据句子指示的时间给定不同的时序权重系数,使得最近发生的新闻内容具有更高的权重,最后使用最大边界相关的方法选择摘要句。通过与基于TF-IDF、Text-Rank、LDA等六种方法的对比,该摘要方法ROUGE评测指标上优于其他方法。从结合评测结果及摘要示例可以看出,该文提出的方法可以有效地从新闻文档集中摘取核心信息,满足用户查询内容的信息需求。