Synthesis and slurry spray coating of barium strontium alumino silicate on SiC substrate

Barium strontium alumino silicate (BSAS); (Ba_0.6Sr_0.4Al₂Si₂O₈) was synthesized through solid state reaction between BaCO₃, SrCO₃, Al₂O₃ and SiO₂ subjected to wet milling in isopropanol for about 24 h. The sequence of the solid state reaction was studied by subjecting to DG/DTG from room temperature to 1550 °C. The crystallographic phase evolution was confirmed by X-ray diffraction of the powders calcined in the range 1000 to 1300 °C for 2 h. The monoclinic celsian phase obtained at 1300 °C, pelletized through uniaxial pressing was sinterable to 67 to 78% density in the temperature range of 1300 to 1500 °C. The density improved to 75 to 94% after ball milling for 76 h, while ZrO₂ addition further improved the density by 2%. The celcian phase of BSAS was dispersed in isopropyl alcohol, milled for about 24 h and spray coated on to plain SiC and mullite precoated SiC substrates. Sintering of coated samples and characterization for weight gain/loss, microstructure, scratch test prove that mullite + BSAS coating is more effective than single layer coating of BSAS on SiC substrates.     

Swarming Microdroplets to a Dexterous Micromanipulator

Many astonishing biological collective behaviors exist in nature, and artificial microrobotic swarms have been developed by emulating these scenarios. However, these microswarms typically have single structures and lack the adaptability that many biological swarms exhibit to thrive in complex environments. Inspired by viscoelastic fire ant aggregations and using a combination of experiment and simulation, a strategy to trigger ferrofluid droplets into forming microswarms exhibiting both liquid-like and solid-like behaviors is reported. By spatiotemporally programming an applied magnetic field, microswarms can be liquefied to implement reversible elongation with a high aspect ratio and solidified into entireties to perform overturning and bending behaviors. It is demonstrated that reconfigurability enables the microswarm to be a mobile dexterous micromanipulator, acting not only as a soft “octopus arm” to explore a confined environment and grasp a targeted object but also adaptively navigate multiple terrains, such as uneven surfaces, curved grooves, complex mazes, high steps, narrow channels, and even wide gaps. This microrobotic swarm can reconfigure both shapes and tasks based on the demands of the environment, presenting novel solutions for a variety of applications.     

电网设备线夹开裂原因

某电力公司变电站用铝合金设备线夹在运行过程发生批次开裂事故,通过宏观观察、断口分析、化学成分分析、力学性能测试、冷冻模拟试验等方法,对设备线夹的开裂原因和开裂机理进行了分析。结果表明:设备线夹焊缝存在焊接缺陷,导致焊缝强度下降;设备线夹接线管底部存在积水空间,寒冷天气下积水结冰,体积膨胀,使焊缝承受设计工况外的负载而过载开裂,造成了线夹开裂。     

5G与WiMAX双模AeroMACS机载终端设计与实现

针对现有航空移动机场通信系统(Aeronautical Mobile Airport Communication System,AeroMACS)尚未形成成熟的机载装机产品的问题,开展AeroMACS机载终端的研究。提出一种基于5G与WiMAX技术的双模AeroMACS机载终端设计方案,不仅能够实现国际标准WiMAX模式下的AeroMACS数据通信,而且利用国内5G技术的优势,大幅提升了AeroMACS机载终端的数据传输性能。通过设计的双通测试与传输速率测试方案,采用灌包测试的方法,验证了所设计的AeroMACS机载终端可以进行双模同时通信的功能,也表明了5G技术下的AeroMACS机载终端传输速率优于WiMAX技术。     

High performance H2 sensor based on rGO-wrapped SnO2–Pd porous hollow spheres

Hydrogen (H₂) sensors based on metal oxide semiconductors (MOS) are promising for many applications such as a rocket propellant, industrial gas and the safety of storage. However, poor selectivity at low analyte concentrations, and independent response on high humidity limit the practical applications. Herein, we designed rGO-wrapped SnO₂–Pd porous hollow spheres composite (SnO₂–Pd@rGO) for high performance H₂ sensor. The porous hollow structure was from the carbon sphere template. The rGO wrapping was via self-assembly of GO on SnO₂-based spheres with subsequent thermal reduction in H₂ ambient. This sensor exhibited excellently selective H₂ sensing performances at 390 °C, linear response over a broad concentration range (0.1–1000 ppm) with recovery time of only 3 s, a high response of ～8 to 0.1 ppm H₂ in a minute, and acceptable stability under high humidity conditions (e. g. 80%). The calculated detection limit of 16.5 ppb opened up the possibility of trace H₂ monitoring. Furthermore, this sensor demonstrated certain response to H₂ at the minimum concentration of 50 ppm at 130 °C. These performances mainly benefited from the special hollow porous structure with abundant heterojunctions, the catalysis of the doped-PdO_x, the relative hydrophobic surface from rGO, and the deoxygenation after H₂ reduction.     

The mechanical and thermal properties,CMAS corrosion resistance,and the wettability of novel thermal barrier material GdTaO4

Because the CMAS corrosion and phase transformation at elevated temperatures above 1250 °C have limited the applications of traditional YSZ, the design of novel thermal barrier materials is a hotspot. GdTaO₄ is considered as a type of potential novel thermal barrier material owing to its low thermal conductivity. In this study, the mechanical and thermal properties, CMAS corrosion resistance, and the wettability of the GdTaO₄ were studied and compared with that of YSZ. The results show that the coefficient of thermal expansion and hardness of GdTaO₄ are 14.1 × 10⁻⁶ K⁻¹ (1350 °C) and 534.2 Hv_0.3 respectively. The thickness of CMAS reaction layer of GdTaO₄ is ~30.8 μm after 24 h reaction at 1350 °C, which is thinner than that of YSZ. After corrosion reaction, the CMAS glass aggregated instead of completely disappearing or continuously extending over the surface of GdTaO₄. The main reaction product is Ca₂Ta₂O₇, and the anorthite phase may not be detected, which is similar to YTaO₄. By comparison, the dense substrate of YSZ became porous and CMAS glass has disappeared after 10 h. CMAS corrosion at 1350 °C. The on-line contact angle results show that the wettability of CMAS on GdTaO₄ is worse than that on YSZ at 1350 °C, while the opposite of the work of adhesion, which indicates that GdTaO₄ can remove liquid CMAS more easily than YSZ TBCs during the service. Furthermore, the corrosion depth and areas of GdTaO₄ are smaller than those of YSZ in the same situation. These findings suggest that GdTaO₄ possesses better high-temperature properties and CMAS corrosion resistance than YSZ as a kind of potential of thermal barrier material.     

Conceptualizing “free-from” food consumption determinants: A systematic integrative literature review focused on gluten and lactose

BackgroundGluten- and lactose-free products are registering a sudden rise in the market, particularly among tolerant people, and this leads to consumer confusion and nutritional inadequacies. The number of studies around this trend has steadily increased in the last 10 years, as scholars from different disciplines have tried to rationalize consumers’ behaviours in these foods’ choice. However, the scientific debate appears fragmented and lacks an integrated view.ObjectivesWe conducted a systematic integrative review of consumers’ determinants of gluten-free and lactose-free consumption to frame the state of the art and research gaps.Methods45 English language articles reporting quantitative empirical studies ranging from 1971 and 2019 were analysed. First we categorized the consumption determinants in six factors applying the model proposed by Koster and Mojet, then we proposed a new integrated conceptualization inspired by Bronfenbrenner’s Transtheoretical Model. Moreover, differences and similarities between tolerant and intolerant consumers will be highlighted.ResultsResearch on intolerant consumers focused more on individuals’ determinants, in terms of awareness, trust, morality, and capability to read nutritional facts (as purchase facilitators); while studies targeting tolerant consumers focused more on objective product characteristics (with price and availability in supermarkets as barriers for consumption). In this target the subjective perspective has been studied only referring to the risk for developing psychological issues in the restrictive diet.ConclusionAs information is lacking in the scientific debate, we suggest for future research the integration of consumers’ subjective implicit levers to decipher free-from purchase behaviours.     

Microstructure,tribological behavior and magnetic properties of Fe−Ni−TiO2 composite coatings synthesized via pulse frequency variation

The Fe−Ni−TiO₂ nanocomposite coatings were electrodeposited by pulse frequency variation. The results showed that the nanocomposite with a very dense coating surface and a nanocrystalline structure was produced at higher frequencies. By increasing the pulse frequency from 10 to 500 Hz, the iron and TiO₂ nanoparticles contentswere increased in expense of nickel content. XRD patterns showed that by increasing the frequency to 500 Hz, an enhancement ofBCC phase was observed and the grain size of deposits was reduced to 35 nm. The microhardness and the surface roughness were increased to 647 HV and 125 nm at 500 Hz due to the grain size reduction and higher incorporation of TiO₂ nanoparticles into the Fe−Ni matrix (5.13 wt.%). Moreover, the friction coefficient and wear rate values were decreased by increasing the pulse frequency;while the saturation magnetization and coercivity values of the composite deposits were increased.     

钻井机器人的连续油管钻压和钻速控制模型

连续油管钻井机器人利用机身内外的钻井液压力差作为动力源，可在牵引连续油管的同时加载钻压。以钻井机器人为基础，建立连续油管钻柱动力学模型，并推导出通过钻井液排量控制钻压和钻速的单参数控制数学模型；对钻井机器人引入调速回路，建立具有调速功能的钻柱动力学模型；在溢流阀调定压力大于机身内外压差时，推导出利用钻井液排量和节流阀流通面积两种参数控制钻压、钻速的数学模型，在溢流阀调定压力小于机身内外压差时，推导出利用钻井液排量、节流阀流通面积和溢流阀调定压力3种参数控制钻压、钻速的数学模型；以11.43 cm（4.5英寸）井眼为例，对上述3种数学模型进行了分析。分析结果表明：钻压、钻速随钻井液排量的增加基本呈线性增加，在钻井液排量大于0.005 m³/s时，钻井机器人能够向前爬行，在钻井液排量大于0.005 7 m³/s时，钻头能够正常钻进；调节节流阀流通面积和溢流阀调定压力，可以在一定范围内无级调钻压和钻速；3种控制方法相结合，可以实现小排量、大钻压，及大排量、小钻压等钻井参数的控制。以控制模型为基础，针对不同井下工况建立钻进工艺的专家数据库，以钻井机器人为"大脑"，结合井下随钻测量数据就能够实现闭环控制，自动钻进。     

Modeling online user behaviors with competitive interactions

Online user behaviors are increasingly modulated by social media. Extant literature mainly focuses on investigating how network structures affect user behaviors. However, recent empirical results demonstrate that user behaviors and network structures usually coevolve dynamically, and topological patterns turn out to be inadequate for characterizing real-world user behaviors. In this paper, we present a dynamic model to deal with this challenge. This proposed model is mainly governed by two competing principles: homophily and homeostasis. Empirical evaluations of three online real-world datasets suggest that the proposed dynamic model can well predict long-range online user behaviors.