Secure image encryption scheme using 4D-Hyperchaotic systems based reconfigurable pseudo-random number generator and S-Box

This paper introduces the design of a hardware efficient reconfigurable pseudorandom number generator (PRNG) using two different feedback controllers based four-dimensional (4D) hyperchaotic systems i.e. Hyperchaotic-1 and -2 to provide confidentiality for digital images. The parameter's value of these two hyperchaotic systems is set to be a specific value to get the benefits i.e. all the multiplications (except a few multiplications) are performed using hardwired shifting operations rather than the binary multiplications, which doesn't utilize any hardware resource. The ordinary differential equations (ODEs) of these two systems have been exploited to build a generic architecture that fits in a single architecture. The proposed architecture provides an opportunity to switch between two different 4D hyperchaotic systems depending on the required behavior. To ensure the security strength, that can be also used in the encryption process in which encrypt the input data up to two times successively, each time using a different PRNG configuration. The proposed reconfigurable PRNG has been designed using Verilog HDL, synthesized on the Xilinx tool using the Virtex-5 (XC5VLX50T) and Zynq (XC7Z045) FPGA, its analysis has been done using Matlab tool. It has been found that the proposed architecture of PRNG has the best hardware performance and good statistical properties as it passes all fifteen NIST statistical benchmark tests while it can operate at 79.101-MHz or 1898.424-Mbps and utilize only 0.036 %, 0.23 %, and 1.77 % from the Zynq (XC7Z045) FPGA's slice registers, slice LUTs, and DSP blocks respectively. Utilizing these PRNGs, we design two 16 × 16 substitution boxes (S-boxes). The proposed S-boxes fulfill the following criteria: Bijective, Balanced, Non-linearity, Dynamic Distance, Strict Avalanche Criterion (SAC) and BIC non-linearity criterion. To demonstrate these PRNGs and S-boxes, a new three different scheme of image encryption algorithms have been developed: a) Encryption using S-box-1, b) Encryption using S-box-2 and, c) Two times encryption using S-box-1 and S-box-2. To demonstrate that the proposed cryptosystem is highly secure, we perform the security analysis (in terms of the correlation coefficient, key space, NPCR, UACI, information entropy and image encryption quantitatively in terms of (MSE, PSNR and SSIM)).     

冠状动脉系统的微分积分终端滑模混沌抑制

冠状动脉系统的混沌现象会导致严重的健康问题。以非线性冠状动脉系统为研究对象，建立了不确定性冠状动脉系统动力学模型，提出了不确定性冠状动脉系统的微分积分终端滑模混沌抑制方法，针对该模型的不确定性设计了扰动观测器，根据Lyapunov理论证明了所设计控制系统的稳定性，通过仿真实验验证了所提出的混沌抑制方法的有效性和可行性。     

风速时间序列混沌判定方法比较研究

混沌识别是对非线性时间序列进行混沌预测的前提。针对时间序列风速确定性与随机性相结合的复杂非线性特征,研究了不同的混沌识别方法,并对风速时间序列进行混沌特征识别。应用随机噪声、周期运动及经典混沌系统的时间序列对所选方法进行可靠性验证。对美国国家风能研究中心M2测风塔实测时间序列风速数据进行非线性混沌特征识别。结果表明:风速时间序列具有明显的混沌特征;各风速时间序列表现出不同程度的混沌特征;各混沌识别方法对风速时间序列混沌特征的表达形式不同,互为补充,相互验证。     

基于混沌理论的弧形闸门支臂振动特性

为了研究弧形闸门支臂的振动问题,采用混沌理论对时间序列进行处理,确定延迟时间τ、嵌入维数m进行相空间重构,并计算时间序列的混沌特征值,进而研究弧形闸门在启闭过程中振动的复杂性。以某水电站弧形闸门支臂振动为研究对象,根据支臂振动加速度原型观测资料,分析不同开度的振动情况,发现启门振动的复杂程度高于闭门工况,小开度的振动复杂程度更高,且支臂振动的复杂程度为与面板连接位置最大,与闸墩连接位置最小,中间位置介于前两者之间。为弧形闸门短期振动预测提供了支持。     

Effect of O2 and temperature on the catalytic performance of Ni/Al2O3 and Ni/MgAl2O4 for the dry reforming of methane (DRM)

Al₂O₃ and MgAl₂O₄ supported 10% (w/w) Ni catalysts having a dispersion of 1.5 and 2.0% are active for DRM at 600 and 750 °C. High temperature reduction of both the calcined catalysts resulted in metallic Ni being formed, suggesting strong support metal interactions. The CH₄ and CO₂ conversion during DRM are relatively constant with time-on-stream, and are higher for Ni/MgAl₂O₄ than Ni/Al₂O₃. Carbon-whiskers are also detected on both catalysts. O₂ co-feed of 2.6% (v/v) and increasing reaction temperature to 750 °C helped in decreasing the amount of carbon deposited, except for Ni/MgAl₂O₄ at 600 °C. Furthermore, higher conversions and H₂/CO ratios are achieved. It appears that on spent Ni/MgAl₂O₄ a different type of carbon species was formed, and this carbon species was difficult to remove by oxygen at 600 °C. Thus, co-feeding O₂, using an appropriate temperature, and choosing a suitable support can reduce the carbon present on the nickel catalysts during DRM.     

A two-stage vision-based method for measuring the key parameters of ball screws

Ball screws are crucial for improving the reliability and interchangeability of transmission mechanical systems; however, existing contact measurement methods that utilise stylus contact are not efficient, which precludes their use for rapid in-situ geometry evaluation. This paper presents a vision-based two-stage method for rapid measurement of key parameters (raceway arc radii and centre distance) of ball screws. The edge contour information is extracted from the acquired image using the dual-tree complex wavelet transform and non-maximal suppression. In the matching stage, a shape-matching algorithm is used for detecting approximate geometrical centres of raceway arcs. The refinement stage, on the other hand, is implemented for acquiring precise dimensional results. Furthermore, the method of averaging multiple measurements is performed to suppress random noise. A comparative experiment is presented to validate the robustness of the proposed method. Based on experimental results, the calculated mean absolute errors in the measurement of the two raceway arc radii and the centre distance are found to be 0.0082 mm, 0.0079 mm and 0.0055 mm, respectively. This study therefore paves the way for key parameter measurement without removing ball screws.     

Mechanism of smoke suppression by melamine in rigid polyurethane foam

The smoke suppression of rigid polyurethane foam (RPUF) modified by melamine was investigated based on three sections: the condensed phase, the carbon layer, and the gas phase. In the condensed phase, the results of thermogravimetry, X‐ray photoelectron spectroscopy (XPS) N1S spectrum, and Fourier transform infrared spectroscopy indicated that melamine could suppress the degradation of RPUF by reacting with the aromatic hydrocarbons. It also reduced the smoke generation because the volatilizable aromatic hydrocarbons were the principal smoke precursors in a fire. In the carbon layer, the decrease from 38.50% to 24.76% of the inner layer oxygen content identified by XPS full‐spectrum and C1S spectrum indicated that melamine could prevent oxygen from transferring into the inner foam by the formation of an enhanced surface carbon layer, and the enhanced carbon layer could also block the release of smoke precursors. In the gas phase, the content of total aromatic hydrocarbons declined to 59.12% according to pyrolysis gaseous chromatography mass spectroscopy and indicated that melamine could reduce the smoke precursors. The results of smoke density chamber and cone calorimeter tests revealed that the addition of the melamine could decrease the smoke density of burning RPUF. Copyright © 2014 John Wiley & Sons, Ltd.     

Non-chaotic and chaotic propagation of stationary and dynamic images through MVKS turbulence

Anisoplanatic electromagnetic (EM) propagation across a turbulent atmosphere has been recently examined for an unmodulated carrier propagating over an image-bearing transparency through optical lensing, and for the embedded information inside a carrier recovered using heterodyning and digital demodulation. Carrier modulation yielded better recovery than simple lens-based imaging. A possible mitigation strategy is proposed whereby the image information is encrypted on an RF chaotic carrier, thereafter secondarily embedded onto an optical carrier. Results based on the modified von Karman (MVKS) and the Hufnagel-Valley (H-V) models showed that the signal/image recovery under turbulence is improved compared with non-chaotic propagation. The case of time-varying/dynamic images is also taken up; it is demonstrated via cross-correlation products that turbulence is mitigated by the use of chaotic carrier encryption. Overall, transmission via chaos offers mitigation against distortions due to turbulence along with the security feature inherent via the chaos keys which prevent signal recovery without key-matching.     

Improved non-maximum suppression for object detection using harmony search algorithm

Non-maximum suppression (NMS) plays a key role in many modern object detectors. It is responsible to remove detection boxes that cover the same object. NMS greedily selects the detection box with maximum score; other detection boxes are suppressed when the degree of overlap between these detection boxes and the selected box exceeds a predefined threshold. Such a strategy easily retain some false positives, and it limits the ability of NMS to perceive nearby objects in cluttered scenes. This paper proposes an effective method combining harmony search algorithm and NMS to alleviate this problem. This method regards the task of NMS as a combination optimization problem. It seeks final detection boxes under the guidance of an objective function. NMS is applied to each harmony to remove imprecise detection boxes, and the remaining boxes are used to calculate the fitness value. The remaining detection boxes in a harmony with highest fitness value are chosen as the final detection results. The standard Pattern Analysis, Statistical Modeling and Computational Learning Visual Object Classes dataset and the Microsoft Common Objects in Context dataset are used in all of the experiments. The proposed method is applied to two popular detection networks, namely Faster Region-based Convolutional Neural Networks and Region-based Fully Convolutional Networks. The experimental results show that the proposed method improves the average precision of these two detection networks. Moreover, the location performance and average recall of these two detectors are also improved.