Techno-economic assessment of hydrogen refueling station: A case study in Croatia

Hydrogen refueling station (HRS) capacity and location depend on the users, which makes it difficult to select the most favorable option before potential users are actually identified. As in Croatia, at least for now, there are no hydrogen users, this study considers a wide range of HRS capacities and their different configurations. These include hydrogen production and charging station within one existing wind farm in Croatia or both nearby the users, the hydrogen production within the wind farm and the charging station nearby the users, while hydrogen is delivered to the station with a tube trailer, and configuration of hydrogen production within the wind farm with a mobile charging station in case of several users in different locations. Each HRS configuration is evaluated by the obtained levelized cost of hydrogen depending on the capital, and operation and maintenance costs within the HRS techno-economic analysis provided.     

High-Efficiency Organic Solar Cells Based on a Low-Cost Fully Non-Fused Electron Acceptor

A series of tetrathiophene-based fully non-fused ring acceptors (4T-1, 4T-2, 4T-3, and 4T-4), which can be paired with the star donor polymer PBDB-T to fabricate highly efficient organic solar cells are developed. Tailoring the size of lateral chains can tune the solubility and packing mode of acceptor molecules in neat and blend films. It is found that the incorporation of 2-ethylhexyl chains can effectively change the compatibility with the donor polymer PBDB-T, and an encouraging power conversion efficiency of 10.15% is accomplished by 4T-3-based organic solar cells. It also presents good compatibility with the other polymer donor and an even higher power conversion efficiency (PCE) of 12.04% is achieved based on D18:4T-3 blend, which is the champion PCE for the fully non-fused acceptors. Importantly, these inexpensive tetrathiophene fully non-fused ring acceptors provide cost-effective photovoltaic performance. The results demonstrate a high photovoltaic performance from synthetically inexpensive materials could be achieved by the rational design of non-fused ring acceptor molecules.     

Physicochemical and technological properties of beef burger as influenced by the addition of pea fibre

This study aimed to evaluate the physicochemical characteristics and sensory attributes of beef burgers with the addition of pea fibre as a partial substitute of meat or fat. Three formulations were prepared: control (CON) – similar to the commercial formulation; fibre/less meat (FLM)—5% meat reduction and addition of 1% pea fibre; fibre/less fat (FLF)—7% fat reduction and addition of 1% pea fibre. Non-significant differences were obtained for pH, colour parameters (L* and b*), texture profile, cooking loss and size reduction among formulations. Moreover, sensory analysis with consumers of beef burgers did not indicate differences among the formulations for all the analysed attributes. Therefore, pea fibre is a promising partial replacer for meat and fat in beef burgers due to the preservation of technological parameters and sensory acceptance.     

BIM技术应用于建筑工程造价的对策研究

随着BIM技术的进步,建筑行业越来越重视BIM技术的应用,并在应用过程中取得一定的成效。本文从工程造价决策、设计、招投标、施工、竣工五个阶段阐述BIM技术在建筑工程造价中的应用对策。     

Responsive supply in fashion mass customisation systems with consumer returns

Mass customisation systems have been well-established in the fashion industry. Some fashion brands offer the mass customisation system for their selected seasonal products, and allow unconditional returns and full refund for any unsatisfied customers. Motivated by the above mentioned observed industrial practice and based on the growing importance of responsive supply, we explore in this paper the value of quick response supply in fashion mass customisation systems with consumer returns. We focus on investigating how the consumer returns rate affects (i) the optimal inventory decision of the fashion brand, (ii) the achievability of Pareto improvement in implementing quick response supply, (iii) the respective values of quick response for the fashion brand, the fashion supplier and also the fashion supply chain, and (iv) the impact of quick response supply on the environment. We interestingly find that consumer returns enhance the value of quick response supply to the fashion supplier. Quick response supply is also found to be helpful in reducing the environmental cost under the fashion mass customisation system with consumer returns.     

基于Prophet人工智能算法的网络潮汐效应预测研究

本文使用Prophet人工智能算法研究与预测移动通信网络“潮汐效应”现象，探索网络“潮汐效应”在优化网络资源配置实现网络降本增效的作用。Prophet人工智能算法是一种简单、有效，且易于实现的人工智能算法。通过facebook的人工智能开源框架fbprophet，研究4G网络PRB利用率等网络资源指标的“潮汐效应”，并预测这些网络资源指标在未来的变化趋势，用来指导当前4G网络减容、扩容和4/5G节电节能等，实现优化网络资源配置达到降本增效的目的。     

平板显示基板玻璃窑炉烟气脱硝技术探究

随着生态环境意识的加强和环保治理力度的提升,平板玻璃窑炉烟气氮氧化物治理已经全面落实。而由于平板显示基板玻璃窑炉烟气性质的独特性,其脱硝技术路线的选择也取决于不同地区氮氧化物排放浓度的限值差异。详细介绍了选择性催化还原法(SCR)、选择性非催化还原法(SNCR)和逆向流选择性催化还原法(CSCR)三种脱硝技术并对比了三者之间在脱硝效率、反应温度、初始投资、全生命周期成本的差异。同时,对未来的发展应用进行了展望。     

Exergoeconomic analysis of hydrogen production using a standalone high-temperature electrolyzer

The conventional hydrogen production methods, primarily steam methane reforming and coal gasification, produce massive amounts of greenhouse gas emissions which significantly cause impacts on the environment. An alternative hydrogen production method is high-temperature electrolysis using Solid Oxide Electrolyzer that combines both high conversion efficiency and saleable high purity hydrogen production. The produced hydrogen can feed the various industrial processes at different scales in addition to offering an environmentally friendly storage option. The scope of this paper is to examine the economic feasibility of this technology through the utilization of the exergoeconomic concept, which traces the flow of exergy through the system and price both waste and products. Therefore, a standalone solid oxide electrolyzer of a 1MWe is considered for hydrogen production using renewably generated electricity. Having the detailed exergy analysis conducted in earlier studies, the focus of this article is on the costing of each exergy stream to determine the exergy cost and the potential changes outcomes as a result of the system operating or design parameters optimization. It is found that the cost of hydrogen production through the modular high-temperature electrolyzer varies between $3-$9/kg with an average of about $5.7/kg, respectively.     

Comparative techno-economic assessment of a large-scale hydrogen transport via liquid transport media

A large-scale point to point hydrogen transport is one strategy for a prospective energy import scenario for certain countries. The case for a hydrogen transport from Australia to Japan has been addressed in several studies. However, most studies lack transparency and detailed insights into the made assumptions thus a fair evaluation of different transport pathways is challenging. To address this issue, we developed a model where a large-scale point to point hydrogen transport of liquid hydrogen is compared with the transport via liquid organic hydrogen carrier (LOHC), namely via methyl cyclohexane and hydrogenated dibenzyl toluene. We analyzed, where energy is required along the different pathways, where hydrogen losses do occur and how the costs are put together. Furthermore, the influence of hydrogen feed costs is also considered. For hydrogen production costs of 5 €₂₀₁₈/kg_H2 the total delivery costs are in the range of 6.40– 8.10 €₂₀₁₈/kg_H2.     

Modeling,design, and optimization of a cost‐effective and reliable hybrid renewable energy system integrated with desalination using the division algorithm

People in the Middle East are facing the problem of freshwater shortages. This problem is more intense for a remote region, which has no access to the power grid. The use of seawater desalination technology integrated with the generated energy unit by renewable energy sources could help overcome this problem. In this study, we refer a seawater reverse osmosis desalination (SWROD) plant with a capacity of 1.5 m³/h used on Larak Island, Iran. Moreover, for producing fresh water and meet the load demand of the SWROD plant, three different stand‐alone hybrid renewable energy systems (SAHRES), namely wind turbine (WT)/photovoltaic (PV)/battery bank storage (BBS), PV/BBS, and WT/BBS are modeled and investigated. The optimization problem was coded in MATLAB software. Furthermore, the optimized results were obtained by the division algorithm (DA). The DA has been developed to solve the sizing problem of three SAHRES configurations by considering the object function's constraints. These results show that this improved algorithm has been simpler, more precise, faster, and more flexible than a genetic algorithm (GA) in solving problems. Moreover, the minimum total life cycle cost (TLCC = 243 763$), with minimum loss of power supply probability (LPSP = 0%) and maximum reliability, was related to the WT/PV/BBS configuration. WT/PV/BBS is also the best configuration to use less battery as a backup unit (69 units). The batteries in this configuration have a longer life cycle (maximum average of annual battery charge level) than two other configurations (93.86%). Moreover, the optimized results have shown that utilizing the configuration of WT/PV/BBS could lead to attaining a cost‐effective and green (without environmental pollution) SAHRES, with high reliability for remote areas, with appropriate potential of wind and solar irradiance.