In-situ self-reconstruction of Ni–Fe–Al hybrid phosphides nanosheet arrays enables efficient oxygen evolution in alkaline

Developing efficient oxygen evolution reaction (OER) electrocatalysts with earth-abundant elements is very important for sustainable H₂ generation via electrochemical water splitting. Here we design a crystalline-amorphous Ni–Fe–Al hybrid phosphides nanosheet arrays grown on NiFe foam for efficient OER application. Dynamic surface reorganization of phosphides at anodic/cathodic polarizations is probed by in situ Raman spectroscopy. The reconstructed amorphous Ni(Fe)OOH species are determined as the active phases that facilitate the OER process. This unique electrode shows highly catalytic activity toward water oxidation, achieving the current densities of 10 and 100 mA cm^?2 at 181 and 214 mV in 1 M KOH, respectively. Meanwhile, it also exhibits excellent stability at a large current density of 100 mA cm^?2 for over 60 h. This work reveals the dynamic structural transformation of pre-catalyst in realistic conditions and highlights the important role of oxyhydroxides as real reactive species in OER process with high activity.     

Enhanced photo-electrochemical activity of ZnO/Cu2S nanotube arrays photocathodes

ZnO/Cu₂S nanotube arrays are fabricated firstly by a facile and capping-agent-free method, and the photo-electrochemical performance has been studied systematically. The results show that ZnO/Cu₂S nanotube arrays achieve enhanced photo-electrochemical water splitting performance and the photocurrent densities of ZnO/Cu₂S are 7.9 times than that of ZnO at 0 V versus Ag/AgCl. The performance of the ZnO/Cu₂S nanotube arrays can be adjusted by changing the amount of Cu₂S microcrystals. The results confirm that the enhanced photo-electrochemical performance of ZnO/Cu₂S is due to the significantly improved visible light absorption, effective separation of photo-induced carriers due to the well band energy match and the formed p-n junction between ZnO and Cu₂S.     

Separable transmit beampattern design for MIMO radars with planar colocated antennas

Multiple-input multiple-output (MIMO) radar transmit beampattern design for one-dimensional arrays has been widely studied in literatures. In this paper, transmit beampattern design is considered for two-dimensional (2D) arrays. As the size of the array is increased, the computational complexity and time for pattern optimization are increased drastically. To overcome these problems, we introduced the conditions upon which the 2D beampattern design for uniform rectangular arrays (URA) can be achieved via the product of two perpendicular transmit beampatterns of uniform linear arrays (ULA). The transmit beampattern design is accomplished under special characteristics such as minimum integrated sidelobe level or special 3 dB beamwidth in azimuth and elevation with much lower computation time.     

Self-supported Ni2P nanotubes coated with FeP nanoparticles electrocatalyst (FeP@Ni2P/NF) for oxygen evolution reaction

Bimetallic phosphides have been widely investigated as electrocatalysts for oxygen evolution reaction (OER) due to their efficient activity and environmental friendliness. While the reasonable design and controllable synthesis of bimetallic phosphide with typical nanostructure is still a great challenge. Hence, we put forward a novel and straightforward way for constructing FeP nanoparticles coated Ni₂P ultrathin nanotube arrays on the surface of Ni foil (FeP@Ni₂P/NF), which is synthesized through two steps of electrodeposition and subsequent in-situ phosphorization process. The obtained FeP@Ni₂P/NF shows excellent electrochemical activity for OER, and it only needs potential of 1.52 V vs. RHE to reach the current density of 50 mA cm⁻² in an alkaline media. The excellent electrocatalytic activity of FeP@Ni₂P/NF mainly benefits from: (i) the synergistic effect between FeP and Ni₂P promoting electron transfer; (ii) the formation of the unique 3D ultrathin nanotube arrays increasing the quantity of active sites and avoiding the agglomeration of catalysts during testing. In addition, the influence of reaction condition on the electrochemical activity for OER has also been investigated through altering the phosphorization temperature of precursor.     

Deep blue/ultraviolet microcavity OLEDs based on solution-processed PVK:CBP blends

There is an increasing need to develop stable, high-intensity, efficient OLEDs in the deep blue and UV. Applications include blue pixels for displays and tunable narrow solid-state UV sources for sensing, diagnostics, and development of a wide band spectrometer-on-a-chip. With the aim of developing such OLEDs we demonstrate an array of deep blue to near UV tunable microcavity (μc) OLEDs (λ ∼373–469 nm) using, in a unique approach, a mixed emitting layer (EML) of poly(N-vinyl carbazole) (PVK) and 4,4′-bis(9-carbazolyl)-biphenyl (CBP), whose ITO-based devices show a broad electroluminescence (EL) in the wavelength range of interest. This 373–469 nm band expands the 493–640 nm range previously attained with μcOLEDs into the desired deep blue-to-near UV range. Moreover, the current work highlights interesting characteristics of the complexity of mixed EML emission in combinatorial 2-d μcOLED arrays of the structure 40 nm Ag/x  nm MoO_x/∼30 nm PVK:CBP (3:1 weight ratio)/y  nm 4,7-diphenyl-1,10-phenanthroline (BPhen)/1 nm LiF/100 nm Al, where x = 5, 10, 15, and 20 nm and y = 10, 15, 20, and 30 nm. In the short wavelength μc devices, only CBP emission was observed, while in the long wavelength μc devices the emission from both PVK and CBP was evident. To understand this behavior simulations based on the scattering matrix method, were performed. The source profile of the EML was extracted from the measured EL of ITO-based devices. The calculated μc spectra indeed indicated that in the thinner, short wavelength devices the emission is primarily from CBP; in the thicker devices both CBP and PVK contribute to the EL. This situation is due to the effect of the optical cavity length on the relative contributions of PVK and CBP EL through a change in the wavelength-dependent emission rate, which was not suggested previously. Structural analysis of the EML and the preceding MoO_x layer complemented the data analysis.     

Generating synthetic benchmark circuits for accelerated life testing of field programmable gate arrays using genetic algorithm and particle swarm optimization

Accelerated life testing (ALT) of a field programmable gate array (FPGA) requires it to be configured with a circuit that satisfies multiple criteria. Hand-crafting such a circuit is a herculean task as many components of the criteria are orthogonal to each other demanding a complex multivariate optimization. This paper presents an evolutionary algorithm aided by particle swarm optimization methodology to generate synthetic benchmark circuits (SBC) that can be used for ALT of FPGAs. The proposed algorithm was used to generate a SBC for ALT of a commercial FPGA. The generated SBC when compared with a hand-crafted one, demonstrated to be more suitable for ALT, measured in terms of meeting the multiple criteria. The SBC generated by the proposed technique utilizes 8.37% more resources; operates at a maximum frequency which is 40% higher; and has 7.75% higher switching activity than the hand-crafted one reported in the literature. The hand-crafted circuit is very specific to the particular device of that family of FPGAs, whereas the proposed algorithm is device-independent. In addition, it took several man months to hand-craft the SBC, whereas the proposed algorithm took less than half-a-day.     

Exploiting array manipulation habits to optimize garbage collection and type flow analysis

A widespread practice to implement a flexible array is to consider the storage area into two parts: the used area, which is already available for read/write operations, and the supply area, which is used in case of enlargement of the array. The main purpose of the supply area is to avoid as much as possible the reallocation of the whole storage area in case of enlargement. As the supply area is not used by the application, the main idea of the paper is to convey the information to the garbage collector, making it possible to avoid completely the marking of the supply area. We also present a simple method to analyze the types of objects, which are stored in an array as well as the possible presence of NULL values within the array. This allows us to better specialize the work of the garbage collector when marking the used area, and also, by transitivity, to improve overall results for type analysis of all expressions of the source code. After introducing several abstract data types, which represent the main arrays concerned by our technique (i.e., zero or variable indexing, circular arrays and hash maps), we measure its impact during the bootstrap of two compilers whose libraries are equipped with these abstract data types. We then measure, on various software products we have not written, the frequency of certain habits of manipulation of arrays, to assess the validity of our approach. Copyright © 2014 John Wiley & Sons, Ltd.     

地表覆盖对季节性冻融期土壤水分特征的影响

为探求不同地表覆盖下非饱和冻融土壤介质中土壤水分的迁移转化规律,于2013年11月10日~2014年3月22日在山西省晋中市东阳镇进行季节性冻融期系列田间试验。结果表明,地表覆盖有效地减少了地表土壤水分的蒸发,削弱了土壤含水率的波动幅度,但不同冻融阶段不同地表覆盖地块的土壤水分有所差异。与裸地(LD)相比,冻结阶段,秸杆覆盖(JG)和地膜覆盖(DM)显著增加了地表以下0~10cm土壤墒情,且DM比JG保墒效果好;融化前期,秸秆覆盖阻碍了融雪水的直接入渗,JG对土层的蓄水保墒作用不明显;融化后期,秸秆覆盖削弱了风速对地表土壤水分的影响,抑制了表土蒸发,对土层具有保墒作用。整个冻融期,DM始终对土层具有保墒作用,且其保墒效果较JG好。地表覆盖有效地减弱了地表以下0~20cm土壤含水率的波动幅度,随着土壤深度的加大,覆盖措施对土壤含水率的影响逐渐减弱。DM土壤水分随时间的变化态势与LD相似程度较高。从储水保墒角度出发,冻融期DM覆盖更具现实意义。研究成果可为北方冬春季节土地利用及管理提供指导。